Hello, first thought it might be a PF issue, but it isn't because even when unloading all rules the problems remains.
The transfer ratio of the network is really slow - other components look fine so far - since it's a server smart reports no errors and everything else is reported as ok as well.
Disabling all services except SSH and let tcpdump run also reported nothing unusual, the used bandwidth overviewed from the outside also doesn't show an installed bot being abused for DoS or as open relay.
Well, it's 7.1p7 - Generic and a self compile 7.1p6 but with both kernels the results don't differ.
Dmesg output:
Checking the load everything is fine as well, memory usage too so I've not much ideas what could be wrong.
Any help is really welcome
The transfer ratio of the network is really slow - other components look fine so far - since it's a server smart reports no errors and everything else is reported as ok as well.
Disabling all services except SSH and let tcpdump run also reported nothing unusual, the used bandwidth overviewed from the outside also doesn't show an installed bot being abused for DoS or as open relay.
Well, it's 7.1p7 - Generic and a self compile 7.1p6 but with both kernels the results don't differ.
Dmesg output:
Code:
...
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.04-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x400<CNXT-ID>
real memory = 1073479680 (1023 MB)
avail memory = 1041121280 (992 MB)
ACPI APIC Table: <D845WD WD84510A>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <D845WD WD84510A> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfeafe000-0xfeafefff,0xfeaa0000-0xfeabffff irq 18 at device 12.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:07:e9:50:2a:d3
fxp0: [ITHREAD]
fxp1: <Intel 82550 Pro/100 Ethernet> port 0xde80-0xdebf mem 0xfeafd000-0xfeafdfff,0xfea80000-0xfea9ffff irq 19 at device 13.0 on pci2
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:07:e9:50:2a:d5
fxp1: [ITHREAD]
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xfd000000-0xfdffffff,0xfeaff000-0xfeafffff irq 20 at device 15.0 on pci2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, USB> at device 31.2 (no driver attached)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <serial bus, USB> at device 31.4 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2392042208 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 57241MB <WDC WD600JB-00ETA0 77.07W77> at ata0-master UDMA100
Checking the load everything is fine as well, memory usage too so I've not much ideas what could be wrong.
Any help is really welcome