U-Boot 2017.05-tld-2 (Jul 26 2017 - 02:37:42 -0700)
Seagate GoFlex Home
SoC: Kirkwood 88F6281_A1
DRAM: 128 MiB
WARNING: Caches not enabled
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot: 3 2 1 0
Initializing devices...
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found
Reset IDE: ide_preinit failed
Loading envs from usb 0...
reading /boot/uEnv.txt
160 bytes read in 63 ms (2 KiB/s)
... envs loaded
importing envs ...
running scan_disk ...
Scan device usb
device usb 0:1
reading /boot/uImage
** Unable to read file /boot/uImage **
device usb 1:1
** Bad device usb 1 **
Scan device ide
Reset IDE: ide_preinit failed
device ide 0:1
** Bad device ide 0 **
device ide 1:1
** Bad device ide 1 **
reading ubldr
295973 bytes read in 85 ms (3.3 MiB/s)
CACHE: Misaligned operation at range [01000098, 01030c04]
CACHE: Misaligned operation at range [01030c04, 01031707]
CACHE: Misaligned operation at range [01031708, 010330f0]
CACHE: Misaligned operation at range [010330f0, 0103558b]
CACHE: Misaligned operation at range [01035590, 01036c98]
CACHE: Misaligned operation at range [01036c98, 01036cf4]
CACHE: Misaligned operation at range [01036cf4, 01036d5c]
CACHE: Misaligned operation at range [01036d5c, 01036e30]
CACHE: Misaligned operation at range [01036e30, 01036e3c]
## Starting application at 0x01000098 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @0x7b12860
FreeBSD/arm U-Boot loader, Revision 1.2
(Thu Nov 30 14:06:37 GMT 2017 root@Test)
DRAM: 128MB
Number of U-Boot devices: 2
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: disk
Probing all disk devices...
Checking unit=0 slice=<auto> partition=<auto>... good.
Booting from disk0s2:
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/boot/kernel/kernel data=0x684724+0x378dc \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|syms=[0x4+0xaa940/-\|/+0x4+0x88e8b-\|/]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 1 second...
Booting [/boot/kernel/kernel]...
Using DTB compiled into kernel.
-\|/Kernel entry at 0x1200100...
Kernel args: (null)
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0: Fri Mar 22 10:56:27 UTC 2019
root@S07:/usr/obj/arm.arm/usr/src/sys/DOCKSTAR arm
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
CPU: Feroceon 88FR131 rev 1 (**unknown 4** core)
Little-endian DC enabled IC disabled WA disabled DC streaming enabled
BTB disabled L2 enabled L2 prefetch enabled
WB enabled LABT branch prediction disabled
16KB/32B 4-way instruction cache
16KB/32B 4-way write-back-locking-C data cache
real memory = 134213632 (127 MB)
avail memory = 121315328 (115 MB)
SOC: Marvell 88F6281 rev A1, TClock 200MHz
Instruction cache prefetch disabled, data cache prefetch disabled
256KB 4-way set-associative write-through unified L2 cache
random: entropy device external interface
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
localbus0: <Marvell device bus> on ofwbus0
ic0: <Marvell Integrated Interrupt Controller> mem 0x20200-0x2023b on simplebus0
timer0: <Marvell CPU Timer> mem 0x20300-0x2032f irq 1 on simplebus0
Event timer "CPUTimer0" frequency 200000000 Hz quality 1000
Timecounter "CPUTimer1" frequency 200000000 Hz quality 1000
gpio0: <Marvell Integrated GPIO Controller> mem 0x10100-0x1011f irq 35,36,37,38,39,40,41 on simplebus0
rtc0: <Marvell Integrated RTC> mem 0x10300-0x10307 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
twsi0: <Marvell Integrated I2C Bus Controller> mem 0x11000-0x1101f irq 43 on simplebus0
iicbus0: <Philips I2C bus> on twsi0
iic0: <I2C generic I/O> on iicbus0
mge0: <Marvell Gigabit Ethernet controller> mem 0x72000-0x73fff irq 12,13,14,11,46 on simplebus0
mge0: PHY0 attached, phy_sc points to mge0
mge0: Ethernet address: 52:3b:20:9c:11:51
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1116R Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
uart0: <16550 or compatible> mem 0x12000-0x1201f irq 33 on simplebus0
uart0: console (1056,n,8,1)
uart1: <16550 or compatible> mem 0x12100-0x1211f irq 34 on simplebus0
cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem 0x30000-0x30fff,0x3d000-0x3dfff irq 22 on simplebus0
ehci0: <Marvell Integrated USB 2.0 controller> mem 0x50000-0x50fff irq 48,19 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
cryptosoft0: <software crypto>
Timecounters tick every 10.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from ufs:/dev/da0s2 [rw]...
Root mount waiting for: usbus0
ugen0.1: <Marvell EHCI root HUB> at usbus0
uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.2: <Lexar microSD RDR> at usbus0
umass0 on uhub0
umass0: <Lexar microSD RDR, class 0/0, rev 2.10/8.15, addr 2> on usbus0
mountroot: waiting for device /dev/da0s2...
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Lexar microSD RDR 0815> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 000000000001
da0: 40.000MB/s transfers
da0: 7583MB (15529984 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
WARNING: / was not properly dismounted
Setting hostuuid: 54e70ba7-5481-11e9-884f-3b2e22d83865.
Setting hostid: 0xb70082ad.
Starting file system checks:
/dev/da0s2: INCORRECT BLOCK COUNT I=481542 (8 should be 0) (CORRECTED)
/dev/da0s2: INCORRECT BLOCK COUNT I=561876 (8 should be 0) (CORRECTED)
/dev/da0s2: UNREF FILE I=481542 OWNER=root MODE=100600
/dev/da0s2: SIZE=0 MTIME=Apr 1 13:55 2019 (CLEARED)
/dev/da0s2: UNREF FILE I=561876 OWNER=root MODE=100600
/dev/da0s2: SIZE=0 MTIME=Apr 1 13:55 2019 (CLEARED)
/dev/da0s2: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/da0s2: 28488 files, 629734 used, 1237873 free (361 frags, 154689 blocks, 0.0% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
random: unblocking device.
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
Starting Network: lo0 mge0 enc0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
mge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> memge0: link state changed to UP
tric 0 mtu 1500
options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
ether 52:3b:20:9c:11:51
hwaddr 52:3b:20:9c:11:51
media: Ethernet autoselect (1000baseT <full-duplex,master>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
enc0: flags=0<> metric 0 mtu 1536
groups: enc
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting Network: mge0.
mge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
ether 52:3b:20:9c:11:51
hwaddr 52:3b:20:9c:11:51
media: Ethernet autoselect (1000baseT <full-duplex,master>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting Network: enc0.
enc0: flags=0<> metric 0 mtu 1536
groups: enc
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Starting sendmail_submit.
Starting sendmail_msp_queue.
can not chdir(/var/spool/clientmqueue/): Permission denied
Apr 1 13:57:41 sm-msp-queue[852]: NOQUEUE: SYSERR(root): can not chdir(/var/spool/clientmqueue/): Permission denied
Program mode requires special privileges, e.g., root or TrustedUser.
/etc/rc: WARNING: failed to start sendmail_msp_queue
Starting cron.
Starting background file system checks in 60 seconds.
Mon Apr 1 13:57:45 UTC 2019
FreeBSD/arm (Amnesiac) (ttyu0)
login: root
Apr 1 13:57:51 login: ROOT LOGIN (root) ON ttyu0
Last login: Mon Apr 1 13:30:58 on ttyu0
FreeBSD 11.2-RELEASE (DOCKSTAR) #0: Fri Mar 22 10:56:27 UTC 2019
Welcome to FreeBSD!
Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories: https://www.FreeBSD.org/security/
FreeBSD Handbook: https://www.FreeBSD.org/handbook/
FreeBSD FAQ: https://www.FreeBSD.org/faq/
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums: https://forums.FreeBSD.org/
Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with: pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.
Show the version of FreeBSD installed: freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages: man man
FreeBSD directory layout: man hier
Edit /etc/motd to change this login announcement.
You have new mail.
7[r[999;999H[6n8�root@:~ # dhclient mge0
DHCPREQUEST on mge0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.55 -- renewal in 2878 seconds.
root@:~ # ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=119 time=29.386 ms
64 bytes from 8.8.8.8: icmp_seq=1 ttl=119 time=29.378 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=119 time=29.832 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=119 time=29.054 ms
^C
--- 8.8.8.8 ping statistics ---
4 packets transmitted, 4 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 29.054/29.413/29.832/0.277 ms
root@:~ # ~.
Unknown user: ..
root@:~ # ~
[EOT]
Command exit status: 0
Script done on Mon Apr 1 15:28:28 2019