Hello all,
I try to change my USB 2.0 devices (USB stick, Android phone) to USB 1.1 in order to use it with VirtualBox running Windows seven 64.
I see some hints on the web but had no success with the sysctl hw.usb.ehci.no_hs.
-> http://www.clearchain.com/blog/posts/how-to-use-freebsd-virtualbox-and-usb2-0-devices
I tried two solutions without success.
1) I put this command in /boot/loader.conf:
My USB device not work anymore (see /var/log/messages below).
2) I put this command in /etc/sysctl.conf:
My USB device works but it is still in HIGH speed.
My device speed is still HIGH and cannot see it to FULL.
Any experiences?
Thanks.
My config:
My devices:
From pciconf ->
From /var/log/messages:
-- If I put hw.usb.ehci.no_hs=1 in /boot/loader.conf the following lines does not appear in /var/log/messages:
I try to change my USB 2.0 devices (USB stick, Android phone) to USB 1.1 in order to use it with VirtualBox running Windows seven 64.
I see some hints on the web but had no success with the sysctl hw.usb.ehci.no_hs.
-> http://www.clearchain.com/blog/posts/how-to-use-freebsd-virtualbox-and-usb2-0-devices
I tried two solutions without success.
1) I put this command in /boot/loader.conf:
Code:
hw.usb.ehci.no_hs=1
2) I put this command in /etc/sysctl.conf:
Code:
hw.usb.ehci.no_hs=1
Code:
@ sudoi sysctl hw.usb.ehci.no_hs
hw.usb.ehci.no_hs: 1
@ sudoi usbconfig
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen1.3: <Cruzer SanDisk> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
My device speed is still HIGH and cannot see it to FULL.
Any experiences?
Thanks.
My config:
Code:
FreeBSD darkstar 9.1-STABLE FreeBSD 9.1-STABLE #2: Thu Jan 31 20:41:22 CET 2013 root@darkstar:/usr/obj/usr/src/sys/THINKPKERNEL amd64
My devices:
From pciconf ->
Code:
ehci0@pci0:0:26:0: class=0x0c0320 card=0x21d217aa chip=0x1c2d8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
ehci1@pci0:0:29:0: class=0x0c0320 card=0x21d217aa chip=0x1c268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
none2@pci0:13:0:0: class=0x0c0330 card=0x21d217aa chip=0x01941033 rev=0x04 hdr=0x00
vendor = 'NEC Corporation'
device = 'uPD720200 USB 3.0 Host Controller'
class = serial bus
subclass = USB
From /var/log/messages:
Code:
kernel: ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf432a000-0xf432a3ff irq 16 at device 26.0 on pci0
kernel: usbus0: EHCI version 1.0
kernel: usbus0 on ehci0
kernel: ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf4329000-0xf43293ff irq 23 at device 29.0 on pci0
kernel: usbus1: EHCI version 1.0
kernel: usbus1 on ehci1
kernel: usbus0: 480Mbps High Speed USB v2.0
kernel: usbus1: 480Mbps High Speed USB v2.0
kernel: ugen0.1: <Intel> at usbus0
kernel: uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
kernel: ugen1.1: <Intel> at usbus1
kernel: uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
kernel: Root mount waiting for: usbus1 usbus0
kernel: Root mount waiting for: usbus1 usbus0
kernel: uhub0: 3 ports with 3 removable, self powered
kernel: uhub1: 3 ports with 3 removable, self powered
-- If I put hw.usb.ehci.no_hs=1 in /boot/loader.conf the following lines does not appear in /var/log/messages:
Code:
kernel: Root mount waiting for: usbus1 usbus0
kernel: ugen0.2: <vendor 0x8087> at usbus0
kernel: uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
kernel: ugen1.2: <vendor 0x8087> at usbus1
kernel: uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
kernel: Root mount waiting for: usbus1 usbus0
kernel: uhub2: 6 ports with 6 removable, self powered
kernel: uhub3: 8 ports with 8 removable, self powered