This is a new server I just installed. It has around 10 bhyve vm:s on it right now. I use latest Intel ix driver from intel-ix-kmod-3.3.6_1 package...
As the network performance went down on the VMs when leaving KVM om Linux due to not optimal bridge code in FreeBSD I want to use SR-IOV on the host.
Obviously I am missing something Therefor I ask you pro:s...
It says SR-IOV is disabled.... See below...
From
What am I missing?
Thanks in advance
/Peo
As the network performance went down on the VMs when leaving KVM om Linux due to not optimal bridge code in FreeBSD I want to use SR-IOV on the host.
Obviously I am missing something Therefor I ask you pro:s...
Code:
13:05:20 server3:/etc # cat /etc/iovctl.conf
PF {
device : "ix3";
num_vfs : 4;
}
DEFAULT {
passthrough : true;
}
13:05:29 server3:/etc #
Code:
13:05:05 server3:/etc # iovctl -f /etc/iovctl.conf -C
iovctl: Could not open device '/dev/iov/ix3': No such file or directory
13:05:15 server3:/etc #
From
pciconf -lvc
Code:
ix3@pci0:5:0:1: class=0x020000 card=0x061115d9 chip=0x10fb8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82599ES 10-Gigabit SFI/SFP+ Network Connection'
class = network
subclass = ethernet
cap 01[40] = powerspec 3 supports D0 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit, vector masks
cap 11[70] = MSI-X supports 64 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x2000]
cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR NS
link x8(x8) speed 5.0(5.0) ASPM disabled(L0s)
cap 03[e0] = VPD
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0003[140] = Serial 1 ac1f6bffff2df35e
ecap 000e[150] = ARI 1
ecap 0010[160] = [B]SR-IOV 1 IOV disabled,[/B] Memory Space disabled, ARI disabled
0 VFs configured out of 64 supported
First VF RID Offset 0x0180, VF RID Stride 0x0002
VF Device ID 0x10ed
Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304
What am I missing?
Thanks in advance
/Peo
Last edited by a moderator: