I'm trying to follow some instructions from the section
Using UART
which show how to load U-Boot over the console UART using X-MODEM... This is what you need to do:-
I believe
Any guidance would be much appreciated.
Using UART
which show how to load U-Boot over the console UART using X-MODEM... This is what you need to do:-
Code:
$ sx -kb /path/to/u-boot-spl.bin < /dev/ttyUSB0 > /dev/ttyUSB0
$ sx -kb --ymodem /path/to/u-boot.img < /dev/ttyUSB0 > /dev/ttyUSB0
I believe
sx
is xmodem and is part of the comms/lrzsz pkg but when I run sx
I get Command not found.Any guidance would be much appreciated.