Hi there, I'm wondering what these error messages mean that are happening during boot. The computer boots fine, and runs as it should (I haven't noticed anything affecting the systems performance).
I am curious, is this is a major problem, what is causing it, and how would I go about fixing it?
Here are the errors I see at boot:
And the full output if needed:
Thank you for your time.
I am curious, is this is a major problem, what is causing it, and how would I go about fixing it?
Here are the errors I see at boot:
Code:
ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20101013/dsopcode-697)
ACPI Error: Method parse/execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff00028e4700), AE_AML_BUFFER_LIMIT (20101013/psparse-633)
ACPI Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff00028e4700), AE_AML_BUFFER_LIMIT (20101013/uteval-185)
can't fetch resources for \\_SB_.MEM_ - AE_AML_BUFFER_LIMIT
Code:
ACPI Warning: For \\_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20101013/nspredef-1197)And the full output if needed:
% dmesg
Code:
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE-p2 #2: Tue Jul 5 00:15:18 BST 2011
root@beastie:/usr/obj/usr/src/sys/CUSTOM amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2611.90-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb2 Family = f Model = 6b Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
TSC: P-state invariant
real memory = 3221225472 (3072 MB)
avail memory = 2947178496 (2810 MB)
ACPI APIC Table: <HPQOEM SLIC-CPC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-CPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20101013/dsopcode-697)
ACPI Error: Method parse/execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff00028e4700), AE_AML_BUFFER_LIMIT (20101013/psparse-633)
ACPI Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff00028e4700), AE_AML_BUFFER_LIMIT (20101013/uteval-185)
can't fetch resources for \\_SB_.MEM_ - AE_AML_BUFFER_LIMIT
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfe02f000-0xfe02ffff irq 23 at device 2.0 on pci0
ohci0: [ITHREAD]
usbus0: <nVidia nForce MCP61 USB Controller> on ohci0
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <NVIDIA nForce MCP61 USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
hdac0: <NVidia MCP61 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 23 at device 5.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pci0: <bridge> at device 7.0 (no driver attached)
atapci0: <nVidia nForce MCP61 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem 0xfe02c000-0xfe02cfff irq 20 at device 8.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf200-0xf20f mem 0xfe02b000-0xfe02bfff irq 21 at device 8.1 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 23 at device 13.0 on pci0
nvidia0: <GeForce 6150SE nForce 430> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
amdtemp0: <AMD K8 Thermal Sensors> on hostb3
acpi_tz0: <Thermal Zone> on acpi0
ACPI Warning: For \\_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20101013/nspredef-1197)
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff irq 0,8 on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 305245MB <Hitachi HDP725032GLA380 GM3OA57A> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
acd0: DVDR <HL-DT-ST DVD-RAM GH40L/1.04> at ata3-master UDMA100 SATA 1.5Gb/s
hdac0: HDA Codec #0: Realtek ALC888
pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus1 usbus0
uhub0: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
ugen0.2: <Logitech> at usbus0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen1.2: <Ralink> at usbus1
run0: <1.0> on usbus1
run0: MAC/BBP RT2872 (rev 0x0202), RF RT2720 (MIMO 1T2R), address 00:1c:df:6a:43:98
run0: firmware RT2870 loaded
Root mount waiting for: usbus1
ugen1.3: <Generic> at usbus1
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus1
umass0:0:0:-1: Attached to scbus0
Trying to mount root from ufs:/dev/ad4s1a
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY csi:0,aa,55,40 asc:3a,0 (Medium not present)
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Multi Flash Reader 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
wlan0: Ethernet address: 00:1c:df:6a:43:98
wlan0: link state changed to UPThank you for your time.
