Hello guys, first of all I am sorry about my English. Congratulations to FreeBSD community for this incredible system. I was looking for another distribution since Debian change to systemd. I am very happy now with FreeBSD except with my USB TV card, it almost work.
Here are some of my system config files.
Here are some of my system config files.
uname -a
Code:
FreeBSD BSD 10.2-RELEASE FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
dmesg
Code:
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
CPU: AMD Phenom(tm) II X6 1075T Processor (3013.84-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100fa0 Family=0x10 Model=0xa Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
SVM: NP,NRIP,NAsids=64
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8268730368 (7885 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
Cuse4BSD v0.1.36 @ /dev/cuse
random: <Software, Yarrow> initialized
module_register_init: MOD_LOAD (vesa, 0xffffffff80db8eb0, 0) error 19
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xd0000000-0xdfffffff,0xfddc0000-0xfdddffff irq 18 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV840 HDA Controller> mem 0xfddfc000-0xfddfffff irq 19 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfd8f8000-0xfd8fffff irq 17 at device 0.0 on pci2
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02e000-0xfe02efff irq 18 at device 18.0 on pci0
usbus1 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe02d000-0xfe02d0ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.0 on pci0
usbus3 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe02b000-0xfe02b0ff irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 20.5 on pci0
usbus5 on ohci2
pcib4: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xae00-0xaeff mem 0xfd9ff000-0xfd9fffff,0xfd9f8000-0xfd9fbfff irq 17 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 1c:6f:65:af:02:51
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe029000-0xfe029fff irq 18 at device 22.0 on pci0
usbus6 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe028000-0xfe0280ff irq 17 at device 22.2 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci2
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC889 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC889 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm2: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC889 (Rear Digital)> at nid 30 and 31 on hdaa1
pcm4: <Realtek ALC889 (Onboard Digital)> at nid 17 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <0x1b6f> at usbus0
uhub0: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen7.1: <ATI> at usbus7
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen6.1: <ATI> at usbus6
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub5: 2 ports with 2 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
ugen7.2: <Afatech> at usbus7
ukbd0: <Afatech DVB-T 2, class 0/0, rev 2.00/2.00, addr 2> on usbus7
kbd2 at ukbd0
ugen2.2: <vendor 0x046d> at usbus2
ugen4.2: <Generic> at usbus4
umass0: <Bulk-In, Bulk-Out, Interface> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:6:0:-1: Attached to scbus6
ugen6.2: <Logitech> at usbus6
ukbd1: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 2> on usbus6
kbd3 at ukbd1
ugen6.3: <Logitech> at usbus6
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD5000AZRX-00A8LB0 01.01A01> ATA8-ACS SATA 3.x device
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device
da0: Serial Number 20070818000000000
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus6 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device
da1: Serial Number 20070818000000000
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH22NS40 NL02> Removable CD-ROM SCSI device
cd0: Serial Number K1ZA96J0942
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da2 at umass-sim0 bus 0 scbus6 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da2: Serial Number 20070818000000000
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus6 target 0 lun 3
da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI device
da3: Serial Number 20070818000000000
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
ada0: Serial Number WD-WMC1U0640081
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad6
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1506920784 Hz quality 800
Trying to mount root from ufs:/dev/ada0s4a [rw]...
uaudio0: <Webcam C170> on usbus2
uaudio0: No playback.
uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 24000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 22050 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 11025 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 8000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No MIDI sequencer.
pcm5: <USB audio> on uaudio0
uaudio0: No HID volume keys found.
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 2> on usbus6
ums0: 10 buttons and [XYZT] coordinates ID=2
ums1: <Logitech USB Laser Mouse, class 0/0, rev 2.00/31.00, addr 3> on usbus6
ums1: 8 buttons and [XYZT] coordinates ID=0
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Juniper XT [AMD Radeon HD 6000 Series]> on vgapci0
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BA 0x174B:0x1482).
info: [drm] register mmio base: 0xFDDC0000
info: [drm] register mmio size: 131072
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=68ba
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xd0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800d0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0xFFFF
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
info: [drm] ATOM BIOS: JUNIPER
drmn0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
drmn0: info: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
info: [drm] Detected VRAM RAM=1024M, BAR=256M
info: [drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 4180790 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 1024M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] MSI enabled 1 message(s)
drmn0: info: radeon: using MSI.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] probing gen 2 caps for device 1002:5978 = 2/0
info: [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
info: [drm] Loading JUNIPER Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff80074b04c00
drmn0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff80074b04c0c
info: [drm] ring test on 0 succeeded in 1 usecs
info: [drm] ring test on 3 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xd0000000-0xe0000000
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb1 addr 0x0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb2 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on iicbb3 addr 0x0
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb4 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on iicbb5 addr 0x0
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb6 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on iicbb7 addr 0x0
iic7: <I2C generic I/O> on iicbus7
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm] DP-1
info: [drm] HPD4
info: [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
info: [drm] Encoders:
info: [drm] DFP1: INTERNAL_UNIPHY2
info: [drm] Connector 1:
info: [drm] HDMI-A-1
info: [drm] HPD5
info: [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
info: [drm] Encoders:
info: [drm] DFP2: INTERNAL_UNIPHY2
info: [drm] Connector 2:
info: [drm] DVI-I-1
info: [drm] HPD1
info: [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
info: [drm] Encoders:
info: [drm] DFP3: INTERNAL_UNIPHY1
info: [drm] CRT2: INTERNAL_KLDSCP_DAC2
info: [drm] Connector 3:
info: [drm] DVI-I-2
info: [drm] HPD6
info: [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
info: [drm] Encoders:
info: [drm] DFP4: INTERNAL_UNIPHY
info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Internal thermal controller with fan control
info: [drm] radeon: power management initialized
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DVI-I-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DVI-I-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DVI-I-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DVI-I-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] fb mappable at 0xD0142000
info: [drm] vram apper at 0xD0000000
info: [drm] size 3145728
info: [drm] fb depth is 24
info: [drm] pitch is 4096
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0
cat /boot/loader.conf
Code:
kern.vty=vt
sem_load="YES"
kern.vt.fb.default_mode="1024x768"
cuse4bsd_load="YES"
cat /etc/rc.conf
Code:
hostname="BSD"
keymap=es
ifconfig_re0="inet 192.168.1.69 netmask 255.255.255.0"
defaultrouter="192.168.1.1"
ifconfig_re0_ipv6="inet6 accept_rtadv"
powerd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
dbus_enable="YES"
hald_enable="YES"
webcamd_enable="YES"
postfix_enable="YES"
sendmail_enable="NONE"