I've just setup FreeBSD 8.1 as a Wireless AP with ipfw, dnsmasq and squid.
Everything works fine for a while but after two hours or less it becomes slow and the connections are lost.
I don't know what to do [cmd=]netstat -i[/cmd] shows a lot of errors:
and [cmd=]ifconfig wlan0 list stat[/cmd] shows the connected clients:
fxp0 is the Internet connection, configured with DHCP, ral0/wlan0 is a Linksys card in hostap mode, the clients can connect get an ip and browse the web.
I don't know if I did something wrong or I am missing something in the firewall for now is set to "OPEN" in rc.conf
Or maybe is the wlan0 config, in short I don't have any idea on how to fix this.
Everything works fine for a while but after two hours or less it becomes slow and the connections are lost.
I don't know what to do [cmd=]netstat -i[/cmd] shows a lot of errors:
Code:
Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs Coll
ral0 2290 <Link#1> 68:7f:74:69:51:c1 0 0 0 142667 1727 0
fxp0 1500 <Link#2> 00:14:85:e4:5c:7f 100099 0 0 76933 0 0
fxp0 1500 192.168.1.0/2 192.168.1.101 94232 - - 76952 - -
plip0 1500 <Link#3> 0 0 0 0 0 0
ipfw0 65536 <Link#4> 0 0 0 0 0 0
lo0 16384 <Link#5> 0 0 0 0 0 0
lo0 16384 fe80:5::1/64 fe80:5::1 0 - - 0 - -
lo0 16384 ::1/128 ::1 0 - - 0 - -
lo0 16384 127.0.0.0/8 127.0.0.1 0 - - 0 - -
wlan0 1500 <Link#6> 68:7f:74:69:51:c1 104626 0 0 188599 191 0
wlan0 1500 192.168.0.0/2 192.168.0.1 2943 - - 87448 -
and [cmd=]ifconfig wlan0 list stat[/cmd] shows the connected clients:
Code:
ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG
00:08:a1:bd:c0:e3 3 5 2M 10.0 0 1299 35200 EPS AE WPA
00:26:5e:1e:fa:78 6 5 1M 15.5 0 3163 34400 EPS AE WPA
74:ea:3a:b4:20:c4 7 5 5M 9.0 0 400 976 EPS AE WPA
64:b9:e8:74:dc:de 10 5 1M 7.0 0 472 14048 EPS AEP WPA
74:ea:3a:b4:2a:7b 11 5 2M 7.0 0 8916 33056 EPS AE WPA
00:11:09:f8:c9:87 12 5 1M 10.0 0 17715 0 EPS AE WPA
74:ea:3a:b4:2c:6c 5 5 9M 6.5 0 800 128 EPS AE WPA
74:ea:3a:b4:19:95 4 5 1M 6.0 0 602 1312 EPS AE WPA
94:0c:6d:e3:ac:8d 2 5 11M 4.0 0 95 42672 EPS AE WPA
00:13:02:1f:65:30 1 5 12M 5.0 0 98 26672 EPS AE WPA
00:23:4e:10:f4:f8 8 5 1M 6.0 15 146 7792 EPS AE WPA
fxp0 is the Internet connection, configured with DHCP, ral0/wlan0 is a Linksys card in hostap mode, the clients can connect get an ip and browse the web.
I don't know if I did something wrong or I am missing something in the firewall for now is set to "OPEN" in rc.conf
Or maybe is the wlan0 config, in short I don't have any idea on how to fix this.