Continuing with ral0 as AP, now on 8.2
It works, but I constantly observe this issues:
It is hard for clients to associate to it.
In browser, when I type URL, occasionally it hangs, then when I hit enter, URL is being loaded.
Ping times, from Win client (expected is time<1ms):
Only stable is, constant download of bigger files, when there is a constant stream.
What this raw description, generally indicates to you?
Does anyone has any advice, on what should I tune?
It works, but I constantly observe this issues:
It is hard for clients to associate to it.
In browser, when I type URL, occasionally it hangs, then when I hit enter, URL is being loaded.
Ping times, from Win client (expected is time<1ms):
Code:
Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time=20ms TTL=64
Reply from 192.168.0.1: bytes=32 time=43ms TTL=64
Reply from 192.168.0.1: bytes=32 time=8ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Only stable is, constant download of bigger files, when there is a constant stream.
What this raw description, generally indicates to you?
Code:
# ifconfig wlan0 list sta
ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG
00:18:4d:b2:52:1f 1 8 36M 12.0 0 22200 8144 EPS AE WPA
00:1f:e1:71:1a:b9 2 8 36M 21.5 0 3391 63472 EPS AE WPA
Does anyone has any advice, on what should I tune?
Code:
# sysctl net.wlan 0 /root
net.wlan.nol_timeout: 1800
net.wlan.cac_timeout: 60
net.wlan.ampdu_age: 500
net.wlan.recv_bar: 1
net.wlan.addba_timeout: 250
net.wlan.addba_backoff: 10000
net.wlan.addba_maxtries: 3
net.wlan.hwmp.targetonly: 0
net.wlan.hwmp.replyforward: 1
net.wlan.hwmp.pathlifetime: 5000
net.wlan.hwmp.roottimeout: 5000
net.wlan.hwmp.rootint: 2000
net.wlan.hwmp.rannint: 1000
net.wlan.hwmp.inact: 5000
net.wlan.mesh.retrytimeout: 40
net.wlan.mesh.holdingtimeout: 40
net.wlan.mesh.confirmtimeout: 40
net.wlan.mesh.maxretries: 2
net.wlan.0.%parent: ral0
net.wlan.0.driver_caps: 562086912
net.wlan.0.bmiss_max: 2
net.wlan.0.inact_run: 300
net.wlan.0.inact_probe: 30
net.wlan.0.inact_auth: 180
net.wlan.0.inact_init: 30
net.wlan.0.amrr_rate_interval: 500
net.wlan.0.amrr_max_sucess_threshold: 15
net.wlan.0.amrr_min_sucess_threshold: 1
Code:
# sysctl -d net.wlan
net.wlan: IEEE 80211 parameters
net.wlan.nol_timeout: NOL timeout (secs)
net.wlan.cac_timeout: CAC timeout (secs)
net.wlan.ampdu_age: AMPDU max reorder age (ms)
net.wlan.recv_bar: BAR frame processing (ena/dis)
net.wlan.addba_timeout: ADDBA request timeout (ms)
net.wlan.addba_backoff: ADDBA request backoff (ms)
net.wlan.addba_maxtries: max ADDBA requests sent before backoff
net.wlan.hwmp.targetonly: Set TO bit on generated PREQs
net.wlan.hwmp.replyforward: Set RF bit on generated PREQs
net.wlan.hwmp.pathlifetime: path entry lifetime (ms)
net.wlan.hwmp.roottimeout: root PREQ timeout (ms)
net.wlan.hwmp.rootint: root interval (ms)
net.wlan.hwmp.rannint: root announcement interval (ms)
net.wlan.hwmp.inact: mesh route inactivity timeout (ms)
net.wlan.mesh.retrytimeout: Retry timeout (msec)
net.wlan.mesh.holdingtimeout: Holding state timeout (msec)
net.wlan.mesh.confirmtimeout: Confirm state timeout (msec)
net.wlan.mesh.maxretries: Maximum retries during peer link establishment
net.wlan.0.%parent: parent device
net.wlan.0.driver_caps: driver capabilities
net.wlan.0.bmiss_max: consecutive beacon misses before scanning
net.wlan.0.inact_run: station inactivity timeout (sec)
net.wlan.0.inact_probe: station inactivity probe timeout (sec)
net.wlan.0.inact_auth: station authentication timeout (sec)
net.wlan.0.inact_init: station initial state timeout (sec)
net.wlan.0.amrr_rate_interval: amrr operation interval (ms)
net.wlan.0.amrr_max_sucess_threshold:
net.wlan.0.amrr_min_sucess_threshold: