I have a 64bit (amd) Realtek wireless NDIS module that works, with one major caveat. It must be loaded from rc.local or later in boot, else I get page fault at boot.
info:
The bz2 file is too large to attach (248.93kb) here, so if anyone is interested, please PM me.
info:
Code:
[donxc@dcpcwifi ~]$ uname -v
FreeBSD 9.0-RC2 #1: Mon Nov 14 10:24:41 PST 2011 root@build9x64.pcbsd.org:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.0/sys/GENERIC
[donxc@dcpcwifi ~]$ ifconfig
~~~~~~
ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 70:1a:04:d6:e7:89
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 70:1a:04:d6:e7:89
inet 192.168.2.4 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::721a:4ff:fed6:e789%wlan0 prefixlen 64 scopeid 0xb
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g
status: associated
ssid donxcz channel 6 (2437 MHz 11g) bssid 00:22:75:cc:64:67
country US authmode WPA2/802.11i privacy OFF txpower 0 bmiss 7
mcastrate 0.5 mgmtrate 0.5 scanvalid 60 protmode CTS roaming MANUAL
bintval 0
[donxc@dcpcwifi ~]$ kldstat -v | grep ndis
500 pci/ndis_rtl8187Se_sys
499 cardbus/ndis_rtl8187Se_sys
498 pccard/ndis_rtl8187Se_sys
497 uhub/ndis_rtl8187Se_sys
46 1 0xffffffff819c3000 7d1c if_ndis.ko (/boot/kernel/if_ndis.ko)
496 uhub/ndis
495 pccard/ndis
494 pci/ndis
47 2 0xffffffff819cb000 142bd ndis.ko (/boot/kernel/ndis.ko)
493 ndisapi
The bz2 file is too large to attach (248.93kb) here, so if anyone is interested, please PM me.