I have an IBM3250, which has a internal serial port, which I'm using for a console, which works fine, under FreeBSD 7.2 STABLE. I need to add some additional serial ports for some other devices. I have a SIIG CyberSerial Dual PCIe (JJ-E20011-S2). I've added puc in the kernel config
the device shows up in the boot
and I get the devices in /dev
None of these seem to work, I don't see anything on output or input, either I/O or even modem, or flow control signals.
I've tried adding COM_MULTIPORT in the kernel with no difference. I also tried removing uart, and the the devices all changed to ttyd[0-4]* and cuaa[0-4]*, the ports didn't work, and broke the serial console, which had been ttyd0 before.
I've had the same results in more then one X3250 with another of the same card.
There must be something I'm missing, but can't seem to find it, so wanted to ask for any other hints on things to try.
Code:
# Serial (COM) ports
device sio
device uart
device puc
Code:
puc0: <Oxford Semiconductor OX16PCI954 UARTs> port 0x2020-0x203f,0x2000-0x201f mem 0xe8101000-0xe8101fff,0xe8100000-0xe8100fff irq 16 at device 0.0 on pci9
puc0: [FILTER]
uart0: <16950 or compatible> on puc0
uart0: [FILTER]
uart1: <16950 or compatible> on puc0
uart1: [FILTER]
uart2: <16950 or compatible> on puc0
uart2: [FILTER]
uart3: <16950 or compatible> on puc0
uart3: [FILTER]
Code:
/dev/cuad0
/dev/cuad0.init
/dev/cuad0.lock
/dev/cuau0
/dev/cuau0.init
/dev/cuau0.lock
/dev/cuau1
/dev/cuau1.init
/dev/cuau1.lock
/dev/cuau2
/dev/cuau2.init
/dev/cuau2.lock
/dev/cuau3
/dev/cuau3.init
/dev/cuau3.lock
/dev/ttyu0
/dev/ttyu0.init
/dev/ttyu0.lock
/dev/ttyu1
/dev/ttyu1.init
/dev/ttyu1.lock
/dev/ttyu2
/dev/ttyu2.init
/dev/ttyu2.lock
/dev/ttyu3
/dev/ttyu3.init
/dev/ttyu3.lock
I've tried adding COM_MULTIPORT in the kernel with no difference. I also tried removing uart, and the the devices all changed to ttyd[0-4]* and cuaa[0-4]*, the ports didn't work, and broke the serial console, which had been ttyd0 before.
I've had the same results in more then one X3250 with another of the same card.
There must be something I'm missing, but can't seem to find it, so wanted to ask for any other hints on things to try.