Hi,
I'm currently freaking out over x configuration with the latest nvidia driver available in the FreeBSD 9 ports collection. The machine is a Sony Vaio VPCF13 which is fully working with Gentoo linux and the same nvidia-driver version and a slightly older xorg version.
Anyway, whatever I try I always get the following message:
My current configuration is:
/etc/rc.conf
/boot/loader.conf
kldstat
I currently have agp removed from the kernel but that didn't help either.
xorg config and the X-log are attached.
I tried (almost) everything I have found by googling. Read FreeBSD doc and tried it. Read nvidia doc and tried it. Read xorg doc and tried what looked reasonable. I even booted up my gentoo which is on a different HDD, configured for the Vaio (where X worked out of the box) and copied the H- and VSync stuff from the Xorg log of gentoo. I even tried the xorg.conf from there. Didn't work either *sigh*
The Modeline in the attached conf was created with gtf but it doesn't work with or without the modeline either. Same for the UseEDID option.
I dont't know what to do anymore. I'm trying this for 4 days now and might go nuts P
It is working with VESA but I don't want to use 800x600 on a 1920x1080 screen ^^
I hope you can help me?
Cheers,
Stefan
I'm currently freaking out over x configuration with the latest nvidia driver available in the FreeBSD 9 ports collection. The machine is a Sony Vaio VPCF13 which is fully working with Gentoo linux and the same nvidia-driver version and a slightly older xorg version.
Anyway, whatever I try I always get the following message:
Code:
Screen(s) found, but none have a usable configuration.
My current configuration is:
/etc/rc.conf
Code:
dbus_enable="YES"
hald_enable="YES"
linux_enable="YES"
/boot/loader.conf
Code:
nvidia_load="YES"
kldstat
Code:
Id Refs Address Size Name
1 36 0xffffffff80200000 11c54c0 kernel
2 1 0xffffffff813c6000 1049bb0 nvidia.ko
3 4 0xffffffff82410000 45090 linux.ko
4 1 0xffffffff82612000 a12 linsysfs.ko
5 1 0xffffffff82613000 42a0 linprocfs.ko
6 1 0xffffffff82618000 328d ng_ubt.ko
7 1 0xffffffff8261c000 8b3d ng_hci.ko
8 3 0xffffffff82625000 a79 ng_bluetooth.ko
9 5 0xffffffff82626000 8e12 netgraph.ko
10 1 0xffffffff8262f000 b4a2 ng_l2cap.ko
11 1 0xffffffff8263b000 1695e ng_btsocket.ko
12 1 0xffffffff82652000 1ba9 ng_socket.ko
13 1 0xffffffff82654000 ac65 ext2fs.ko
I currently have agp removed from the kernel but that didn't help either.
xorg config and the X-log are attached.
I tried (almost) everything I have found by googling. Read FreeBSD doc and tried it. Read nvidia doc and tried it. Read xorg doc and tried what looked reasonable. I even booted up my gentoo which is on a different HDD, configured for the Vaio (where X worked out of the box) and copied the H- and VSync stuff from the Xorg log of gentoo. I even tried the xorg.conf from there. Didn't work either *sigh*
The Modeline in the attached conf was created with gtf but it doesn't work with or without the modeline either. Same for the UseEDID option.
I dont't know what to do anymore. I'm trying this for 4 days now and might go nuts P
It is working with VESA but I don't want to use 800x600 on a 1920x1080 screen ^^
I hope you can help me?
Cheers,
Stefan