Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-RC1 #0: Wed Feb 10 07:47:42 UTC 2010
root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Quad-Core AMD Opteron(tm) Processor 2356 (2300.10-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f23 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee400800<SYSCALL,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
TSC: P-state invariant
Cores per package: 4
usable memory = 8574922752 (8177 MB)
avail memory = 8254914560 (7872 MB)
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xe8000000-0xefffffff,0xf5ff0000-0xf5ffffff irq 44 at device 3.0 on pci0
pci0: <base peripheral> at device 4.0 (no driver attached)
pci0: <base peripheral> at device 4.2 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 45 at device 4.4 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus> at device 4.6 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pci2: <ACPI PCI bus> on pcib2
atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 6.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 6.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0x1c00-0x1cff mem 0xf5ee0000-0xf5ee0fff irq 5 at device 7.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci0
usb1: USB revision 1.0
uhub1: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> port 0x3000-0x30ff mem 0xf5ed0000-0xf5ed0fff irq 5 at device 7.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> port 0x3400-0x34ff mem 0xf5ec0000-0xf5ec0fff irq 5 at device 7.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <(0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 4 ports with 4 removable, self powered
pcib3: <ACPI PCI-PCI bridge> irq 42 at device 15.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 38 at device 16.0 on pci0
pci8: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> irq 39 at device 17.0 on pci0
pci14: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 40 at device 18.0 on pci0
pci11: <ACPI PCI bus> on pcib6
ciss0: <HP Smart Array P800> port 0x4000-0x40ff mem 0xf9f00000-0xf9ffffff,0xf9ef0000-0xf9ef0fff irq 40 at device 0.0 on pci11
ciss0: [ITHREAD]
pcib7: <ACPI PCI-PCI bridge> irq 41 at device 19.0 on pci0
pci3: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib8
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xf6000000-0xf7ffffff irq 41 at device 0.0 on pci4
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce0: Ethernet address: 00:23:7d:26:d8:96
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (0x01090605); Flags( MFW MSI )
pcib9: <ACPI Host-PCI bridge> on acpi0
pci64: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 36 at device 15.0 on pci64
pci67: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 32 at device 16.0 on pci64
pci70: <ACPI PCI bus> on pcib11
ciss1: <HP Smart Array P400> port 0x5000-0x50ff mem 0xfdf00000-0xfdffffff,0xfdef0000-0xfdef0fff irq 32 at device 0.0 on pci70
ciss1: [ITHREAD]
pcib12: <PCI-PCI bridge> irq 33 at device 17.0 on pci64
pci73: <PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> irq 34 at device 18.0 on pci64
pci65: <ACPI PCI bus> on pcib13
pcib14: <PCI-PCI bridge> at device 0.0 on pci65
pci66: <PCI bus> on pcib14
bce1: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xfa000000-0xfbffffff irq 34 at device 0.0 on pci66
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce1: Ethernet address: 00:23:7d:26:d8:94
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (0x01090605); Flags( MFW MSI )
pcib15: <PCI-PCI bridge> irq 35 at device 19.0 on pci64
pci74: <PCI bus> on pcib15
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcefff,0xcf000-0xd07ff,0xe5000-0xe6fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FILTER]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub0
kbd2 at ukbd0
ums0: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on uhub0
ums0: 3 buttons.
uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.07, addr 2> on uhub2
uhub4: 4 ports with 4 removable, self powered
ukbd1: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 3> on uhub4
kbd3 at ukbd1
ukbd2: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on uhub4
kbd4 at ukbd2
uhid0: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on uhub4
ums1: <Dell Dell USB Keyboard Hub, class 0/0, rev 1.10/2.00, addr 4> on uhub4
ums1: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <Optiarc DVD RW AD-7561A/GH53> at ata0-master UDMA33
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-5 device
da0: 135.168MB/s transfers
da0: Command Queueing Enabled
da0: 1119856MB (2293465904 512 byte sectors: 255H 32S/T 65535C)
da1 at ciss1 bus 0 target 0 lun 0
da1: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-5 device
da1: 135.168MB/s transfers
da1: Command Queueing Enabled
da1: 839892MB (1720099632 512 byte sectors: 255H 32S/T 65535C)
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
Trying to mount root from ufs:/dev/da0s1a
bce0: link state changed to UP
bce1: link state changed to UP
pid 34748 (try), uid 0: exited on signal 10 (core dumped)
MCA: bank 0, status 0xf600000000010015
MCA: CPU 0 UNCOR PCC OVER DTLB L1 error
MCA: Address 0x801921000