Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE #0 r268512: Thu Jul 10 23:44:39 UTC 2014
root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: AMD C-50 Processor (997.52-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x500f10 Family = 0x14 Model = 0x1 Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 1762238464 (1680 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ACRSYS ACRPRDCT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0x80000000-0x8fffffff,0x90400000-0x9043ffff irq 18 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x1314) HDA Controller> mem 0x90444000-0x90447fff irq 19 at device 1.1 on pci0
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4118-0x411f,0x4124-0x4127,0x4110-0x4117,0x4120-0x4123,0x4100-0x410f mem 0x9044c000-0x9044c3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 2 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0x9044b000-0x9044bfff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0x9044a000-0x9044a0ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0x90449000-0x90449fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0x90448000-0x904480ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
hdac1: <ATI SB600 HDA Controller> mem 0x90440000-0x90443fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci6: <ACPI PCI bus> on pcib3
alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0x2000-0x207f mem 0x90200000-0x9023ffff irq 18 at device 0.0 on pci6
alc0: 11776 Tx FIFO, 12032 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Ethernet address: 1c:75:08:fa:87:51
pcib4: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci7: <ACPI PCI bus> on pcib4
ath0: <Atheros 9287> mem 0x90100000-0x9010ffff irq 19 at device 0.0 on pci7
ath0: AR9287 mac 384.2 RF5133 phy 15.15
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Conexant CX20584 HDA CODEC> at cad 0 on hdac1
hdaa1: <Conexant CX20584 Audio Function Group> at nid 1 on hdacc1
pcm1: <Conexant CX20584 (Analog)> at nid 31 and 26 on hdaa1
pcm2: <Conexant CX20584 (Right Analog)> at nid 25 and 27 on hdaa1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9500325AS 0001SDM1> ATA-8 SATA 2.x device
ada0: Serial Number 5VEGBV23
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
SMP: AP CPU #1 Launched!
cd0: <Slimtype DVD A DS8A5SH XA15> Removable CD-ROM SCSI-0 device
cd0: Serial Number 010120146391
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Timecounter "TSC" frequency 997521934 Hz quality 800
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1
Root mount waiting for: usbus3 usbus1
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1
ugen3.2: <ALi Corporation> at usbus3
ugen0.2: <Newmen1300> at usbus0
ukbd0: <Newmen1300 MOUSE, class 0/0, rev 1.10/11.10, addr 2> on usbus0
kbd2 at ukbd0
ums0: <Newmen1300 MOUSE, class 0/0, rev 1.10/11.10, addr 2> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=1
Root mount waiting for: usbus3
ugen3.3: <Generic> at usbus3
umass0: <Bulk-In, Bulk-Out, Interface> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0:-1: Attached to scbus2
Trying to mount root from ufs:/dev/ada0p2 [rw]...
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 20090516388200000
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>