mskc0: <Marvell Yukon 88E8040T Fast Ethernet> irq 17 at device 0.0 on pci3
msk0: <Marvell Technology Group Ltd. Yukon FE+ Id 0xb8 Rev 0x00> on mskc0
msk0: disabling jumbo frame support
msk0: Ethernet address: 00:23:8b:65:fe:7f
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E3016 10/100 Fast Ethernet PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mskc0: [FILTER]
iwn0: <Intel(R) PRO/Wireless 5100> irq 16 at device 0.0 on pci2
iwn0: MIMO 1T2R, MoW, address 00:22:fa:1e:96:64
iwn0: [ITHREAD]
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Thanks you very much...pvgrol said:Hi,
regarding Toshiba (and probably other laptops having similar issues - may be related to Phoenix bios) I had the same problems with a Satellite P300 (recent model PSPCCE-04F00C), no wired (Marvell Yukon 88E8040T) or wireless (Intel 5100) network interface. All due to the BIOS clearing resources and FreeBSD not able to allocate PCI resources behind a bridge.
....
Happily surfing now from the sofa
epopen said:Thanks you very much...
My LAN card work fine !!
Can report the patch to FreeBSD dev ACPI team?
Thanks you very much.