8.0 release can correctly recognize Intel 82945G/Gz integrated Graphics Controller?

L

lcy66

Hi,
The display card of my computer:
under linux: Intel 82945G/Gz integrated Graphics Controller (Inter graphics chipset)
under Windows: Intel 4 Series Express Chipset Family

Do the 8.0 support the card? Because if start X, there are some warning messages in the Xorg.0.log:

......
Code: 
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory
drmOpenDevice: open result is -1, (No such file or directory)
Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory
drmOpenDevice: open result is -1, (No such file or directory)
Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory
drmOpenDevice: open result is -1, (No such file or directory)
drmOpenDevice: Open failed
......

I guess the type of the display card is incorrect or should load some modules?

Thank you very much!
 
Hi, Adam:
Sorry, the Xorg.0.log is too long(28591 byte), so I paste the part only:

Code: 
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 2.7.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/local/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 2.1.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
        965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        Mobile Intel\xc2\xae GM45 Express Chipset,
        Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [3] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [4] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [5] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [6] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [7] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
        [8] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [9] 0   0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 0.1.0
        ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Creating default Display subsection in Screen section
        "Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Q45/Q43
(--) intel(0): Chipset: "Q45/Q43"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFE800000
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output HDMI-2 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_C" initialized.
(II) intel(0): HDMI output 2 detected
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "DEL", prod id 40981
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 40981
(II) intel(0): Output VGA connected
(II) intel(0): Output HDMI-2 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1280x1024
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (340, 270) mm
(**) intel(0): DPI set to (95, 120)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/local/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 2.4.0
        ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Comparing regs from server start up to After PreInit
(II) UnloadModule: "vesa"
(II) Unloading /usr/local/lib/xorg/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [3] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
        [4] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
        [5] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
        [6] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [7] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
        [8] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [9] 0   0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 1006592 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 4026368 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
 
That excerpt doesn't show anything wrong. Is there something specific in the way that X is working (or not working) that makes you think there's a problem?

Also, please use [code][/code] tags around blocks of code or text that you otherwise copy and paste into your post.

Adam
 
It should be 'Attach Files' option (Manage attachemts button in Additional Options section right below Reply to Thread section) so you could just attach a text file with you post.

I often get such messages after new install. The reason could be also /etc/X11/xorg.conf .
What are default resolution and HorizSync and VertRefresh ranges from your monitor specification?
Could you also attach xorg.conf and output of dmesg |grep vga ?
 
You must log in or register to reply here.
Back
Top