Latest activity

You appear to be running an out-of-date and EoL FreeBSD version.

% pkg search -x pynacl py311-pynacl-1.5.0_2 Python binding to the Networking and Cryptography library ports/security/py-pynacl % make package-name py311-pynacl-1.5.0_2 % pkg search py311-pynacl py311-pynacl-1.5.0_2...

Good! The reboot was not needed, a kldload of the modules would have worked just fine.

I run jackd on top of the sound hardware and then route the master through the Jamin mastering plugin for EQ etc. and a pulseaudio demon on top (I don't play music through pulse, pulse is for software that doesn't offer jack support). But that...

Guys, learn about "visudo". It is up to you if a password is needed with sudo. While I cannot recommend turning off the password requirement in general, it can make a lot of sense to disable the password requirement for certain commands. visudo...

% pkg search -x pynacl py311-pynacl-1.5.0_2 Python binding to the Networking and Cryptography library ports/security/py-pynacl % make package-name py311-pynacl-1.5.0_2 % pkg search py311-pynacl py311-pynacl-1.5.0_2...

OSS has very strong equalizer features but there is no nifty graphical tool installed by default. You can take a look at the command line way, see FreeBSD Mixer or install something like audio/fossmixer to name just one option. Personally, I do...

Perhaps the VirtualBox, Gentoo guest, Kernel configuration, Graphics support wiki is of some help: Graphics support ---> <*> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ---> Enable legacy fbdev...

Daft Punk - Digital Love Depeche Mode - Blasphemous Rumors Nine Inch Nails - Closer (Precursor Remix)

The topology will look like this: There's two way to achieve this. First option: To use routing only without NAT but it's only possible if you have access to your home ISP router and only if it support additional static routing or some dynamic...

Regarding your network schema above, what do you want to achieve by not using ISP modem wireless/wired connections also for phones/devices and inserting FreeBSD machine with hostap wifi dhcp connection? Anyway 172.16.1.1/16 and 172.16.1.2/16...

Probably not allowed to redistribute them. No idea if this would work, but if the EUFI firmware supports the option and you can save the keys in the firmware, they will likely be saved in the varfile where all the other EUFI settings (like the...

Hi, I had a couple issues with gnome after the latest quarterly update and I wanted to share my solutions in case anyone else is in a similar situation. 1- I wasn't able to launch specific gnome apps like files (nautilus) or settings...

Hm, that might be interesting solution. What's the policy about illegal pdfs though? I imagine most of the pdfs (ebooks) people own are not legal; or so I assume given my library.

We weren't complaining about any of that. I have one of his ebooks. It was something unrelated to su, sudo, doas, any access control and his books that had no business being brought up. I use doas, but sudo may have been the inspiration and...

Just installed it, 'only' 18MiB, seems sophisticated, but I do not know what to do with it. I personally prefer an own solution as I wrote above, a small program that generates an sqlite3 db for search, perhaps recoll can be used to generate it...

Or set up your own repository of course.

% pkg which /usr/local/lib/libavformat.so /usr/local/lib/libavformat.so was installed by package ffmpeg-6.1.2_16,1 Update or reinstall multimedia/ffmpeg

Or set up your own repository of course.

Yes it's expected. Certain Tier-2 platforms don't build 3rd party packages anymore (which includes ports-mgmt/pkg). https://pkg.freebsd.org states for FreeBSD:14:powerpc64le "(only pkgbase is updated)" (see upload dates of "base_*" and...

It's Tier 2: Also: Tier-2 support package sets: FreeBSD:13:i386 FreeBSD:13:armv6 FreeBSD:13:armv7 FreeBSD:14:i386 FreeBSD:14:armv6 FreeBSD:14:armv7 FreeBSD:14:powerpc (only pkgbase is updated)...

I believe that this is your problem. Rollback this change and run pkg upgrade -f -r FreeBSD-kmods, that should bring back your working Nvidia module.

Not to forget how to keep the knives sharp. [The implement on the extreme right is only for cheap knives; it removes lots of metal.]

A garlic press that's easy to clean, a potato ricer, and thermometers...

Come on - the quoted list pretty much sums up to "never". The impression I get of the sqlite people is that they know what they are doing and that they seem fun to work with. I'm still smiling at their way to handle the CoC debacle when that was...

It was much easier than I thought. pkgbase installations leave a rc.pkgnew on the filesystem so I replaced my old /etc/rc with it and rebooted. All good.

I'd suggest not poking the bear, maybe... Linux camp is gonna get ideas. 😏

You may also try drm-latest-kmod, which at the moment is based on Linux 6.9. Be aware that in my case (Intel) it didn't work well with Xorg (no problems with Wailand though).

Maybe copy the /etc/rc file from installation media distributions, base.txz.

OSS if you want high quality audio including pass-through and bit-perfect audio. Pulseaudio often interferes with things (bit-perfect audio, passthrough), causes lagg and was the reason I migrated my HTPC from Ubuntu to FreeBSD. With Kodi and...

Of course it's cool and tricky, but I would metaphorically smack anyone who did that up side the head, while yelling "bad engineer! no cookie!" Actually, someone may come up with some esoteric need, but I'd more take offense to it if the...

https://www.sqlite.org/whyc.html#why_isn_t_sqlite_coded_in_a_safe_language_ Why isn't sqlite coded in Rust?

https://www.sqlite.org/whyc.html#why_isn_t_sqlite_coded_in_a_safe_language_ Why isn't sqlite coded in Rust?

Correction: not-STABLE anymore. 😅 Precisely, OSVERSION 1500500 means "the first stable branch tied to 15.0". Once releng/15.1 is branched from stable/15 in the future, it would become 1501500 from 15005xy. And "-STABLE", "-RELEASE", "-ALPHA5"...

There is really no comparison. sound(4) is the engine of FreeBSD digital audio. OSS is the interface. Pulseaudio is the server, consuming sound(4) via its OSS backend. Pulseaudio can only sound nominally as good as OSS, not better. Does it per...

Tracker You keep showing the Firefox layout but not the Chrome one. Again, they look the same on my Firefox and Chromium and it appears to me to be by design. Here's the site he's talking about.

Having a dog watch me lying on the carpet :)

Coffee maker, coffee grinder, but at the top is good knives I like a Gyuto Santoku and good Chef's knife patterns.

Are you curious? Maybe I could tell you how I came across this... I like to explore old operating systems, I keep some of them in virtual machines, this time it was OS2 / warp, and I want to surf on the web ... old school obviously. I can't...

Bottle opener.

For my devices on DHCPD using FreeBSD's hostap to access the Internet through the modem. In this setup, I'll simplify parts from earlier in this thread. In parts changing what I've had above: /etc/rc.conf: ifconfig_wlan0="inet 172.16.1.1/16...

If you are new to FreeBSD, i'll suggest starting with a *-RELEASE version instead.

It's certainly possible, but none of the Gentoo drivers seem to work. As for scfb, I use that successfully in FreeBSD VM's, most Linux ones, I haven't manually added a video driver, it just worked, I would think with either Vesa or framebuffer.

I think your guest in bhyve would not detect any real GPU unless you do GPU Passthrough. In UEFI boot, i think you should be able to use scfb but i am not sure, never tried it in any bhyve VM. Maybe VNC related?

drhowarddrfine, I updated the page saying I'm not sure, but I also put in a link to a page of vermaden's where he gives a bit more info. I think what I left out was mounting the vm directory, but I'll have to test it all at some point. Anyway...

If you are new to FreeBSD, i'll suggest starting with a *-RELEASE version instead.

If you are new to FreeBSD, i'll suggest starting with a *-RELEASE version instead.

Convection oven, air fryer is somewhat similar but has a lot more moving air. Absolutely agree. I really only use the microwave function to heat up those ready-made meals.

I started with a BETA1 ISO (i.e. https://download.freebsd.org/releases/amd64/amd64/ISO-IMAGES/15.0/FreeBSD-15.0-BETA1-amd64-bootonly.iso), but it didn't appear to in fact be BETA1:# uname -a FreeBSD skulltrail 15.0-STABLE FreeBSD 15.0-STABLE...

Great for making stamppot :)