need multicast update callback

Stuff that plugs in via USB, FireWire, eSATA, PS/2, etc.

need multicast update callback

Postby alez » 06 Jan 2010, 06:40

ipw0: need multicast update callback

How to solve this problem?

uname -a
Code: Select all
FreeBSD freebsd. 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009     root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386


dmesg | grep ipw0
Code: Select all
ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> mem 0xe0200000-0xe0200fff irq 5 at device 7.0 on pci2
ipw0: [ITHREAD]
ipw0: need multicast update callback


ifconfig
Code: Select all
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
  options=8<VLAN_MTU>
  ether 02:00:f0:01:16:9d
  ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
  lladdr 0.0.f0.41.0.1.16.9d.a.2.ff.fe.0.0.0.0
ipw0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
  ether 00:04:23:93:c2:f1
  media: IEEE 802.11 Wireless Ethernet autoselect mode 11b
  status: associated
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  options=2009<RXCSUM,VLAN_MTU,WOL_MAGIC>
  ether 00:00:f0:88:16:9c
  inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255
  media: Ethernet autoselect (100baseTX <full-duplex>)
  status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
  options=3<RXCSUM,TXCSUM>
  inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
  inet6 ::1 prefixlen 128
  inet 127.0.0.1 netmask 0xff000000
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  ether 00:04:23:93:c2:f1
  inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
  media: IEEE 802.11 Wireless Ethernet DS/1Mbps mode 11b
  status: associated
  ssid RADIOSPOT channel 6 (2437 Mhz 11b) bssid 00:02:cf:6b:60:74
  country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
  roaming MANUAL
alez
Junior Member
 
Posts: 6
Joined: 04 Jan 2010, 10:34

Postby kachel » 12 Jan 2010, 09:31

Same problem here; just can't figure it out.
kachel
Junior Member
 
Posts: 1
Joined: 11 Jan 2010, 16:26

Postby moman61 » 21 Mar 2010, 01:49

ipw0 is not supported in freebsd 8 you will have to use a lan card such as belkin etc.
moman61
Junior Member
 
Posts: 10
Joined: 25 Jan 2010, 03:13

Postby richardpl » 21 Mar 2010, 11:14

moman61 wrote:ipw0 is not supported in freebsd 8 you will have to use a lan card such as belkin etc.


The OP issue is completely unrelated to your issue.

To the OP, you can just ignore that message.
richardpl
Member
 
Posts: 841
Joined: 17 Nov 2008, 17:02
Location: Croatia


Return to Peripheral Hardware

Who is online

Users browsing this forum: No registered users and 0 guests