Hi.
I've got AMD FX-4100, ASUS M5A97 with the AMD 970, FreeBSD 9.0-RELEASE amd64 GENERIC.
I've got
to eliminate acpi_throttle issues.
If I try to enable powerd (via rc.conf) I get:
Or if I launch powerd in console:
So, my question is: is it a hardware issue (and possibly I have to turn on/off something in BIOS), or do I have to tune something here, in FreeBSD?
I've got AMD FX-4100, ASUS M5A97 with the AMD 970, FreeBSD 9.0-RELEASE amd64 GENERIC.
I've got
Code:
hint.acpi_throttle.0.disabled="1"
debug.hwpstate_verbose="1"
If I try to enable powerd (via rc.conf) I get:
Code:
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: AMD FX(tm)-4100 Quad-Core Processor (3612.16-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1698220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,AVX>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8158220288 (7780 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 16
cpu1 (AP): APIC ID: 17
cpu2 (AP): APIC ID: 18
cpu3 (AP): APIC ID: 19
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
acpi0: <ALASKA A M I> on motherboard
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110527/psargs-392)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110527/nsinit-380)
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
...
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
hwpstate0: going to fetch info from acpi_perf
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
...
Configuring syscons: keymap blanktime.
Starting cron.
Starting inetd.
...
hwpstate0: setting P1-state on cpu0
hwpstate0: result P0-state on cpu0
hwpstate0: error: loop is not enough.
hwpstate0: setting P1-state on cpu1
hwpstate0: result P1-state on cpu1
hwpstate0: setting P1-state on cpu2
hwpstate0: result P1-state on cpu2
hwpstate0: setting P1-state on cpu3
hwpstate0: result P1-state on cpu3
hwpstate0: set freq failed, err 6
hwpstate0: setting P1-state on cpu0
hwpstate0: result P1-state on cpu0
hwpstate0: setting P1-state on cpu1
hwpstate0: result P1-state on cpu1
hwpstate0: setting P1-state on cpu2
hwpstate0: result P1-state on cpu2
hwpstate0: setting P1-state on cpu3
hwpstate0: result P1-state on cpu3
hwpstate0: setting P2-state on cpu0
hwpstate0: result P1-state on cpu0
hwpstate0: error: loop is not enough.
hwpstate0: setting P2-state on cpu1
hwpstate0: result P2-state on cpu1
hwpstate0: setting P2-state on cpu2
hwpstate0: result P2-state on cpu2
hwpstate0: setting P2-state on cpu3
hwpstate0: result P2-state on cpu3
hwpstate0: set freq failed, err 6
hwpstate0: setting P2-state on cpu0
hwpstate0: result P2-state on cpu0
hwpstate0: setting P2-state on cpu1
hwpstate0: result P2-state on cpu1
hwpstate0: setting P2-state on cpu2
hwpstate0: result P2-state on cpu2
hwpstate0: setting P2-state on cpu3
hwpstate0: result P2-state on cpu3
hwpstate0: setting P0-state on cpu0
hwpstate0: result P0-state on cpu0
hwpstate0: setting P0-state on cpu1
hwpstate0: result P0-state on cpu1
hwpstate0: setting P0-state on cpu2
hwpstate0: result P0-state on cpu2
hwpstate0: setting P0-state on cpu3
hwpstate0: result P0-state on cpu3
Or if I launch powerd in console:
Code:
sf1# powerd -v -n hadp
powerd: unable to determine AC line status
load 76%, current freq 3600 MHz ( 0), wanted freq 7200 MHz
load 32%, current freq 3600 MHz ( 0), wanted freq 7200 MHz
load 43%, current freq 3600 MHz ( 0), wanted freq 7200 MHz
load 38%, current freq 3600 MHz ( 0), wanted freq 7200 MHz
load 39%, current freq 3600 MHz ( 0), wanted freq 7200 MHz
load 39%, current freq 3600 MHz ( 0), wanted freq 7200 MHz
load 37%, current freq 3600 MHz ( 0), wanted freq 7200 MHz
load 20%, current freq 3600 MHz ( 0), wanted freq 6975 MHz
load 63%, current freq 3600 MHz ( 0), wanted freq 7200 MHz
^Ctotal joules used: 47.205
So, my question is: is it a hardware issue (and possibly I have to turn on/off something in BIOS), or do I have to tune something here, in FreeBSD?