Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011
root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor 2800+ (1608.05-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Family = f Model = 2c Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,
FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
real memory = 536870912 (512 MB)
avail memory = 506347520 (482 MB)
ACPI APIC Table: <VIAK8 AWRDACPI>
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <VIAK8 AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1fef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA K8T800Pro host to PCI bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xf4000000-0xf4ffffff,0xe0000000-0xefffffff,0xf5000000-0xf5ffffff
irq 16 at device 0.0 on pci1
atapci0: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xc400-0xc403,0xc800-0xc807,0xcc00-
0xcc03,0xd000-0xd00f,0xd400-0xd4ff irq 20 at device 15.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device
15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.0 on pci0
uhci0: [ITHREAD]
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.1 on pci0
uhci1: [ITHREAD]
usbus1: <VIA 83C572 USB controller> on uhci1
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.2 on pci0
uhci2: [ITHREAD]
usbus2: <VIA 83C572 USB controller> on uhci2
uhci3: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 21 at device 16.3 on pci0
uhci3: [ITHREAD]
usbus3: <VIA 83C572 USB controller> on uhci3
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf7000000-0xf70000ff irq 21 at device 16.4 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <VIA VT6202 USB 2.0 controller> on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xf7001000-0xf70010ff irq 18 at device 19.0 on
pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:16:e6:4b:d9:55
rl0: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1608054844 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
acd0: DVDR <LITE-ON DVDRW SOHW-1213S/TS0D> at ata0-master UDMA33
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA> at usbus3
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <VIA> at usbus4
uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ad3: DMA limited to UDMA33, device found non-ATA66 cable
ad3: 152626MB <Seagate ST3160815A 3.AAD> at ata1-slave UDMA33
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad3s1a
Setting hostuuid: aca9bc6e-a8ac-11e0-9ab9-0016e64bd955.
Setting hostid: 0x9245fdc0.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
ugen1.2: <Microsoft> at usbus1
ukbd0: <Microsoft Microsoft 2.4GHz Transceiver V1.0, class 0/0, rev 2.00/2.70, addr 2> on usbus1
kbd2 at ukbd0
Starting file system checks:
/dev/ad3s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad3s1a: clean, 73000018 free (78234 frags, 9115223 blocks, 0.1% fragmentation)
ums0: <Microsoft Microsoft 2.4GHz Transceiver V1.0, class 0/0, rev 2.00/2.70, addr 2> on usbus1
Mounting local file systems:
.
ums0: 5 buttons and [XYZT] coordinates ID=17
ums0: 0 buttons and [ZT] coordinates ID=0
Setting hostname: evilus.ru
.
Starting Network: lo0 rl0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3808<VLAN_MTU,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 00:16:e6:4b:d9:55
inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect (none)
status: no carrier
add net default: gateway 192.168.1.1
Starting devd.
Configuring keyboard:
keymap
.
Starting ums0 moused
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files
.
Starting syslogd.
Clearing /tmp (X related).
Starting Open Sound System
Starting dbus.
Starting hald.
Updating motd:
.
Configuring syscons:
keymap
blanktime
.
Starting sshd.
rl0: link state changed to UP
Starting cron.
Starting inetd.
Jul 7 18:00:15 evilus inetd[1043]: ssh/tcp: bind: Address already in use
Starting background file system checks in 60 seconds.
Thu Jul 7 18:00:15 CEST 2011