Hello,
I am unable to assign the Ipv6 to em0 interface. When I run this command:
It says:
I tried assiging IPv6 through sysinstall > post-package configuration > network services > Do you want to enable Ipv6?
But still its not assigning the same.
Pls Help.
I am unable to assign the Ipv6 to em0 interface. When I run this command:
/etc/rc.d/network_ipv6 restart
It says:
Code:
add net ::ffff:0.0.0.0: gateway ::1: route already in table
add net ::0.0.0.0: gateway ::1: route already in table
net.inet6.ip6.forwarding: 0 -> 0
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
net.inet6.ip6.accept_rtadv: 1 -> 1
add net fe80::: gateway ::1: route already in table
add net ff02::: gateway ::1: route already in table
IPv4 mapped IPv6 address support=NO
I tried assiging IPv6 through sysinstall > post-package configuration > network services > Do you want to enable Ipv6?
But still its not assigning the same.
Pls Help.