Start:
1. boot
2. login: root
3. insert usb-flash and see:
4. checking device
5. checking partitions
6. (!) try to mount:
7. (!) try to mount:
Question: how to mount?
PS: sorry for my bad english)
1. boot
2. login: root
3. insert usb-flash and see:
Code:
# ugen4.3: <JetFlash> at usbus4
umass1: <JetFlash Mass Storage Device, class 0/0, rev.2.00/1.00, addr 3> on usbus4
umass1: SCSI over Bulk-Only; quirks = 0x0100
umass1:1:1:-1: Attached to scbus1
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI Status: Check Condition
(probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim1:1:0:0): Not ready to change, medium may have changed
(probe0:umass-sim1:1:0:0): Retrying Command (per Sence Data)
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <JetFlash Transcend 2GB 8.07> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
d1: 1926MB (3944448 512 byte sectors: 255H 63S/T 245C)
GEOM: da1: media size does not match label.
4. checking device
Code:
# ls /dev | grep da1
da1
da1a
5. checking partitions
Code:
# fdisk /dev/da1
******* Working on device /dev/da1 *******
parameters extracted from in-core disklabel are:
cylinders=245 heads=255 sectors/track=63 (16065 blks/cyl)
parameters to be used for BIOS calculations are:
cylinders=245 heads=255 sectors/track=63 (16065 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Informations from DOS bootblock is:
The data for partition 1 is:
sysid 14 (0x0e), (Primary 'big' DOS (>32MB, LBA))
start 63, size 3944385 (1925Meg), flag 0
beg: cyl 0/ head 1/ sector 1;
end: cyl 244/ head 254/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
6. (!) try to mount:
Code:
#mount -t msdosfs /dev/da1 /mnt
GEOM: da1: media size does not match label.
mount_msdosfs: /dev/da1: Invalid argument
Code:
#mount -t msdosfs /dev/da1a /mnt
GEOM: da1: media size does not match label.
mount_msdosfs: /dev/da1a: Invalid argument
Question: how to mount?
PS: sorry for my bad english)