Hi,
I am trying to install FreeBSD 10 from a USB stick. I tried the i386 and amd64 images and tried wrote it under Windows with
In any case, the system is booting from the USB stick up to the point, where it tries to run /sbin/init. Apperently, the file cannot be found which causes a kernel panic and reboot after a short delay.
EDIT: This is what I am seeing just before the error occurs:
Can anybody help me out?
I am trying to install FreeBSD 10 from a USB stick. I tried the i386 and amd64 images and tried wrote it under Windows with
Win32DiskImager
as well as under Ubuntu using dd
as described in section 2.3 in the handbook.In any case, the system is booting from the USB stick up to the point, where it tries to run /sbin/init. Apperently, the file cannot be found which causes a kernel panic and reboot after a short delay.
EDIT: This is what I am seeing just before the error occurs:
Code:
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub4: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7 usbus3
ugen7.2: <SanDisk> at usbus 7 <-- this is the memory stick I am booting from
umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.27 addr 2> on usbus7
umass0: SCSI over Bulk Only, quirks = 0x0100
umass0:4:0:-1: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <SanDisk Cruzer Fit 1.27> Removable Direct Access SCSI-6 device
da0: Serial Number 4C530012310120121214
da0: 40.00MB/s transfers
da0: 7633MB (15633408 512 byte sectors: 255H 63S/T 973C)
da0: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus7
ugen2.2: <Broadcom Corp> at usbus2
ugen7.3: <SuYin> at usbus7
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
exec /sbin/init: error 8
exec /sbin/init.bak: error 8
/: bad dir ino 22 at offset 0: mangled entry
init: not found in path /sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init
panic: no init
cpuid = 1
KDB: stack backtrace:
#0 0xffffffff808e7dd0 at kdb_backtrace+0x60
#1 0xffffffff808af8b5 at panic+0x155
#2 0xffffffff80861780 at start_init+0x2c0
#3 0xffffffff8088198a at fork_exit+0x9a
#4 0xffffffff80c758ce at fork_trampoline+0xe
Uptime: 6s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Can anybody help me out?