HW Monitoring - C2750 Board

O

oliver@

Developer
Hi,

I finally bought the Supermicro A1SAM-2750F. As it is sold as "server board" it has plenty on HW monitoring stuff onboard. I wonder if I could get any information out of it on FreeBSD. What I found out so far is, that coretemp works of course. But the usual smb/smbus/intpm stuff does not work (nothing found) - hw.acpi also does not offer anything.

It looks like it is all handled through an AST2400 at least

Any ideas on how to get my fan speeds and environmental temperatures?
 
no idea how accurate the values are, but with the ipmi driver and ipmitools, it seems to work :)

Code: 
# ipmitool sdr
CPU Temp         | 20 degrees C      | ok
System Temp      | 31 degrees C      | ok
Peripheral Temp  | 35 degrees C      | ok
DIMMA1 Temp      | no reading        | ns
DIMMA2 Temp      | no reading        | ns
DIMMB1 Temp      | no reading        | ns
DIMMB2 Temp      | no reading        | ns
FAN1             | no reading        | ns
FAN2             | 2800 RPM          | ok
FAN3             | no reading        | ns
VCCP             | 0.85 Volts        | ok
VDIMM            | 1.48 Volts        | ok
12V              | 12.45 Volts       | ok
5VCC             | 5.10 Volts        | ok
3.3VCC           | 3.37 Volts        | ok
VBAT             | 3.08 Volts        | ok
5V Dual          | 5.13 Volts        | ok
3.3V AUX         | 3.30 Volts        | ok
Chassis Intru    | 0x00              | ok
 
You must log in or register to reply here.
Back
Top