Hello,
Today I tried to install 9.1-RELEASE i386 on my VIA P900 (Eden X2 CPU). The only way I found to pass the boot stage is to start in safe mode (with or without ACPI, no difference). After that, so far, everything seems fine.
I tried without success to "emulate" the safe mode by adding the following lines into /boot/loader.conf:
SMP seems not to be the issue as with or without
the result is the same.
The boot blocks right after:
In safe mode it continues with:
Any idea?
Thanks
Frédéric
Today I tried to install 9.1-RELEASE i386 on my VIA P900 (Eden X2 CPU). The only way I found to pass the boot stage is to start in safe mode (with or without ACPI, no difference). After that, so far, everything seems fine.
I tried without success to "emulate" the safe mode by adding the following lines into /boot/loader.conf:
Code:
kern.smp.disabled="1"
hint.kbdmux.0.disabled="1"
hw.ata.ata_dma="0"
hw.ata.atapi_dma="0"
hw.ata.wc="0"
hw.eisa_slots="0"
Code:
kern.smp.disabled="1"
The boot blocks right after:
Code:
Sep 5 14:23:49 FreebsdBox kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
Sep 5 14:23:49 FreebsdBox kernel: Device configuration finished.
Sep 5 14:23:49 FreebsdBox kernel: procfs registered
Sep 5 14:23:49 FreebsdBox kernel: Timecounters tick every 1.000 msec
Sep 5 14:23:49 FreebsdBox kernel: vlan: initialized, using hash tables with chaining
Sep 5 14:23:49 FreebsdBox kernel: lo0: bpf attached
Sep 5 14:23:49 FreebsdBox kernel: hptrr: no controller detected.
In safe mode it continues with:
Code:
Sep 5 14:23:49 FreebsdBox kernel: hdacc0: <VIA (0x9f80) HDA CODEC> at cad 1 on hdac0
Sep 5 14:23:49 FreebsdBox kernel: hdacc0: Root Node at nid=0: 1 subnodes 1-1
Sep 5 14:23:49 FreebsdBox kernel: hdaa0: <VIA (0x9f80) Audio Function Group> at nid 1 on hdacc0
Sep 5 14:23:49 FreebsdBox kernel: hdaa0: Audio Function Group at nid=1: 2 subnodes 2-3
Any idea?
Thanks
Frédéric