I just upgraded my system from 13.2 to 14.0. I used
. Everything seemed to go fine. But, when I rebooted I did the freebsd-upgrade install, twice. Then, I could not reboot into X. Here is my Xorg.0.log file:
I'm still not sure why this doesn't work. I don't see any errors, but it drops out. Thanks for any help.
Code:
freebsd-update upgrade -r 14.0-RELEASE
Code:
[ 961.381]
X.Org X Server 1.21.1.9
X Protocol Version 11, Revision 0
[ 961.381] Current Operating System: FreeBSD miller 14.0-RELEASE FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
[ 961.381]
[ 961.381] Current version of pixman: 0.42.2
[ 961.381] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 961.381] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 961.381] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 27 15:55:41 2023
[ 961.381] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 961.382] (==) No Layout section. Using the first Screen section.
[ 961.382] (==) No screen section available. Using defaults.
[ 961.382] (**) |-->Screen "Default Screen Section" (0)
[ 961.382] (**) | |-->Monitor "<default monitor>"
[ 961.382] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 961.382] (**) Option "DontZap" "off"
[ 961.382] (==) Automatically adding devices
[ 961.382] (==) Automatically enabling devices
[ 961.382] (==) Automatically adding GPU devices
[ 961.382] (==) Automatically binding GPU devices
[ 961.382] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 961.382] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d
[ 961.382] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 961.382] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 961.382] (II) Module ABI versions:
[ 961.382] X.Org ANSI C Emulation: 0.4
[ 961.382] X.Org Video Driver: 25.2
[ 961.383] X.Org XInput driver : 24.4
[ 961.383] X.Org Server Extension : 10.0
[ 961.387] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 961.387] (II) Platform probe for /dev/dri/card0
[ 961.393] (--) PCI:*(0@0:2:0) 8086:2a42:8086:2a42 rev 7, Mem @ 0xfd400000/4194304, 0xd0000000/268435456, I/O @ 0x0000ff00/8, BIOS @ 0x????????/65536
[ 961.393] (--) PCI: (0@0:2:1) 8086:2a43:8086:2a42 rev 7, Mem @ 0xfdb00000/1048576
[ 961.393] (II) LoadModule: "glx"
[ 961.393] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 961.395] (II) Module glx: vendor="X.Org Foundation"
[ 961.395] compiled for 1.21.1.9, module version = 1.0.0
[ 961.395] ABI class: X.Org Server Extension, version 10.0
[ 961.395] (==) Matched intel as autoconfigured driver 0
[ 961.395] (==) Matched modesetting as autoconfigured driver 1
[ 961.395] (==) Matched scfb as autoconfigured driver 2
[ 961.395] (==) Matched vesa as autoconfigured driver 3
[ 961.395] (==) Assigned the driver to the xf86ConfigLayout
[ 961.395] (II) LoadModule: "intel"
[ 961.395] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 961.395] (II) Module intel: vendor="X.Org Foundation"
[ 961.395] compiled for 1.21.1.9, module version = 2.99.917
[ 961.395] Module class: X.Org Video Driver
[ 961.395] ABI class: X.Org Video Driver, version 25.2
[ 961.395] (II) LoadModule: "modesetting"
[ 961.395] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so
[ 961.396] (II) Module modesetting: vendor="X.Org Foundation"
[ 961.396] compiled for 1.21.1.9, module version = 1.21.1
[ 961.396] Module class: X.Org Video Driver
[ 961.396] ABI class: X.Org Video Driver, version 25.2
[ 961.396] (II) LoadModule: "scfb"
[ 961.396] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so
[ 961.396] (II) Module scfb: vendor="X.Org Foundation"
[ 961.396] compiled for 1.21.1.9, module version = 0.0.5
[ 961.396] ABI class: X.Org Video Driver, version 25.2
[ 961.396] (II) LoadModule: "vesa"
[ 961.396] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 961.397] (II) Module vesa: vendor="X.Org Foundation"
[ 961.397] compiled for 1.21.1.9, module version = 2.5.0
[ 961.397] Module class: X.Org Video Driver
[ 961.397] ABI class: X.Org Video Driver, version 25.2
[ 961.397] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 961.397] (II) intel: Driver for Intel(R) HD Graphics
[ 961.397] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 961.397] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 961.397] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 961.397] (II) scfb: driver for wsdisplay framebuffer: scfb
[ 961.397] (II) VESA: driver for VESA chipsets: vesa
[ 961.397] (--) Using syscons driver with X support (version 2.0)
[ 961.397] (--) using VT number 9
[ 961.410] (WW) Falling back to old probe method for modesetting
[ 961.410] (WW) Falling back to old probe method for scfb
[ 961.410] scfb trace: probe start
[ 961.410] scfb trace: probe done
[ 961.410] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 961.410] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 961.410] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 961.410] (==) intel(0): RGB weight 888
[ 961.410] (==) intel(0): Default visual is TrueColor
[ 961.410] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 961.410] (**) intel(0): Relaxed fencing enabled
[ 961.410] (**) intel(0): Wait on SwapBuffers? enabled
[ 961.410] (**) intel(0): Triple buffering? enabled
[ 961.410] (**) intel(0): Framebuffer tiled
[ 961.410] (**) intel(0): Pixmaps tiled
[ 961.410] (**) intel(0): 3D buffers tiled
[ 961.410] (**) intel(0): SwapBuffers wait enabled
[ 961.410] (==) intel(0): video overlay key set to 0x101fe
[ 961.447] (II) intel(0): Output VGA-1 has no monitor section
[ 961.451] (II) intel(0): Output HDMI-1 has no monitor section
[ 961.451] (II) intel(0): Output DP-1 has no monitor section
[ 961.455] (II) intel(0): Output HDMI-2 has no monitor section
[ 961.532] (II) intel(0): Output DP-2 has no monitor section
[ 961.671] (II) intel(0): Output TV-1 has no monitor section
[ 961.697] (II) intel(0): EDID for output VGA-1
[ 961.697] (II) intel(0): Manufacturer: SAM Model: 10e Serial#: 1296707897
[ 961.697] (II) intel(0): Year: 2004 Week: 32
[ 961.697] (II) intel(0): EDID Version: 1.3
[ 961.697] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 961.697] (II) intel(0): Sync: Separate Composite
[ 961.697] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 961.697] (II) intel(0): Gamma: 2.20
[ 961.697] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 961.697] (II) intel(0): First detailed timing is preferred mode
[ 961.697] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 961.697] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 961.697] (II) intel(0): Supported established timings:
[ 961.697] (II) intel(0): 720x400@70Hz
[ 961.697] (II) intel(0): 640x480@60Hz
[ 961.697] (II) intel(0): 640x480@67Hz
[ 961.697] (II) intel(0): 640x480@72Hz
[ 961.697] (II) intel(0): 640x480@75Hz
[ 961.697] (II) intel(0): 800x600@56Hz
[ 961.697] (II) intel(0): 800x600@60Hz
[ 961.697] (II) intel(0): 800x600@72Hz
[ 961.697] (II) intel(0): 800x600@75Hz
[ 961.697] (II) intel(0): 832x624@75Hz
[ 961.697] (II) intel(0): 1024x768@60Hz
[ 961.697] (II) intel(0): 1024x768@70Hz
[ 961.697] (II) intel(0): 1024x768@75Hz
[ 961.697] (II) intel(0): 1280x1024@75Hz
[ 961.697] (II) intel(0): 1152x864@75Hz
[ 961.697] (II) intel(0): Manufacturer's mask: 0
[ 961.697] (II) intel(0): Supported standard timings:
[ 961.697] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 961.697] (II) intel(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 961.697] (II) intel(0): Supported detailed timing:
[ 961.697] (II) intel(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 961.697] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 961.697] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 961.697] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 961.697] (II) intel(0): Monitor name: SyncMaster
[ 961.697] (II) intel(0): Serial No: HMEX803333
[ 961.697] (II) intel(0): EDID (in hex):
[ 961.697] (II) intel(0): 00ffffffffffff004c2d0e0139314a4d
[ 961.697] (II) intel(0): 200e01036c261e782aee95a3544c9926
[ 961.697] (II) intel(0): 0f5054bfef808180714f010101010101
[ 961.697] (II) intel(0): 010101010101302a009851002a403070
[ 961.698] (II) intel(0): 1300782d1100001e000000fd00384b1e
[ 961.698] (II) intel(0): 510e000a202020202020000000fc0053
[ 961.698] (II) intel(0): 796e634d61737465720a2020000000ff
[ 961.698] (II) intel(0): 00484d45583830333333330a202000cd
[ 961.698] (II) intel(0): Printing probed modes for output VGA-1
[ 961.698] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 961.698] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 961.698] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 961.698] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 961.698] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 961.698] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 961.698] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 961.698] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 961.698] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 961.698] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 961.698] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 961.698] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 961.698] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 961.698] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 961.698] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 961.698] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 961.702] (II) intel(0): EDID for output HDMI-1
[ 961.702] (II) intel(0): EDID for output DP-1
[ 961.706] (II) intel(0): EDID for output HDMI-2
[ 961.784] (II) intel(0): EDID for output DP-2
[ 961.921] (II) intel(0): EDID for output TV-1
[ 961.921] (II) intel(0): Output VGA-1 connected
[ 961.921] (II) intel(0): Output HDMI-1 disconnected
[ 961.921] (II) intel(0): Output DP-1 disconnected
[ 961.921] (II) intel(0): Output HDMI-2 disconnected
[ 961.921] (II) intel(0): Output DP-2 disconnected
[ 961.921] (II) intel(0): Output TV-1 disconnected
[ 961.921] (II) intel(0): Using exact sizes for initial modes
[ 961.921] (II) intel(0): Output VGA-1 using initial mode 1280x1024 +0+0
[ 961.921] (II) intel(0): Kernel page flipping support detected, enabling
[ 961.921] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 961.921] (==) intel(0): DPI set to (96, 96)
[ 961.921] (II) Loading sub module "fb"
[ 961.921] (II) LoadModule: "fb"
[ 961.921] (II) Module "fb" already built-in
[ 961.921] (II) Loading sub module "dri2"
[ 961.921] (II) LoadModule: "dri2"
[ 961.921] (II) Module "dri2" already built-in
[ 961.921] (II) UnloadModule: "modesetting"
[ 961.921] (II) Unloading modesetting
[ 961.921] (II) UnloadModule: "scfb"
[ 961.921] (II) Unloading scfb
[ 961.921] (II) UnloadModule: "vesa"
[ 961.921] (II) Unloading vesa
[ 961.921] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120, tiled
[ 961.947] (II) UXA(0): Driver registered support for the following operations:
[ 961.947] (II) solid
[ 961.947] (II) copy
[ 961.947] (II) composite (RENDER acceleration)
[ 961.947] (II) put_image
[ 961.947] (II) get_image
[ 961.947] (II) intel(0): [DRI2] Setup complete
[ 961.947] (II) intel(0): [DRI2] DRI driver: crocus
[ 961.947] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 961.948] (==) intel(0): Backing store enabled
[ 961.948] (==) intel(0): Silken mouse enabled
[ 961.948] (II) intel(0): Initializing HW Cursor
[ 961.948] (==) intel(0): DPMS enabled
[ 961.948] (==) intel(0): Intel XvMC decoder enabled
[ 961.948] (II) intel(0): Set up textured video
[ 961.948] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 961.948] (II) intel(0): DRI2: Enabled
[ 961.948] (II) intel(0): DRI3: Disabled
[ 961.948] (==) intel(0): hotplug detection: "enabled"
[ 961.976] (II) Initializing extension Generic Event Extension
[ 961.976] (II) Initializing extension SHAPE
[ 961.977] (II) Initializing extension MIT-SHM
[ 961.977] (II) Initializing extension XInputExtension
[ 961.978] (II) Initializing extension XTEST
[ 961.978] (II) Initializing extension BIG-REQUESTS
[ 961.978] (II) Initializing extension SYNC
[ 961.979] (II) Initializing extension XKEYBOARD
[ 961.979] (II) Initializing extension XC-MISC
[ 961.980] (II) Initializing extension SECURITY
[ 961.980] (II) Initializing extension XFIXES
[ 961.981] (II) Initializing extension RENDER
[ 961.981] (II) Initializing extension RANDR
[ 961.982] (II) Initializing extension COMPOSITE
[ 961.982] (II) Initializing extension DAMAGE
[ 961.983] (II) Initializing extension MIT-SCREEN-SAVER
[ 961.983] (II) Initializing extension DOUBLE-BUFFER
[ 961.984] (II) Initializing extension RECORD
[ 961.984] (II) Initializing extension DPMS
[ 961.985] (II) Initializing extension Present
[ 961.985] (II) Initializing extension DRI3
[ 961.985] (II) Initializing extension X-Resource
[ 961.985] (II) Initializing extension XVideo
[ 961.986] (II) Initializing extension XVideo-MotionCompensation
[ 961.986] (II) Initializing extension GLX
[ 962.085] (II) AIGLX: Loaded and initialized crocus
[ 962.085] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 962.085] (II) Initializing extension XFree86-VidModeExtension
[ 962.085] (II) Initializing extension XFree86-DGA
[ 962.086] (II) Initializing extension XFree86-DRI
[ 962.086] (II) Initializing extension DRI2
[ 962.086] (II) intel(0): Setting screen physical size to 338 x 270
[ 962.240] (II) config/udev: Adding input device System keyboard multiplexer (/dev/input/event0)
[ 962.240] (**) System keyboard multiplexer: Applying InputClass "evdev keyboard catchall"
[ 962.240] (II) LoadModule: "evdev"
[ 962.240] (II) Loading /usr/local/lib/xorg/modules/input/evdev_drv.so
[ 962.240] (II) Module evdev: vendor="X.Org Foundation"
[ 962.240] compiled for 1.21.1.9, module version = 2.10.6
[ 962.240] Module class: X.Org XInput Driver
[ 962.240] ABI class: X.Org XInput driver, version 24.4
[ 962.240] (II) Using input driver 'evdev' for 'System keyboard multiplexer'
[ 962.241] (**) System keyboard multiplexer: always reports core events
[ 962.241] (**) evdev: System keyboard multiplexer: Device: "/dev/input/event0"
[ 962.241] (--) evdev: System keyboard multiplexer: Vendor 0 Product 0
[ 962.241] (--) evdev: System keyboard multiplexer: Found keys
[ 962.241] (II) evdev: System keyboard multiplexer: Configuring as keyboard
[ 962.241] (**) Option "config_info" "udev:/dev/input/event0"
[ 962.241] (II) XINPUT: Adding extended input device "System keyboard multiplexer" (type: KEYBOARD, id 6)
[ 962.241] (**) Option "xkb_rules" "evdev"
[ 962.281] (II) config/udev: Adding input device System mouse (/dev/input/event1)
[ 962.281] (**) System mouse: Applying InputClass "evdev pointer catchall"
[ 962.281] (II) Using input driver 'evdev' for 'System mouse'
[ 962.281] (**) System mouse: always reports core events
[ 962.281] (**) evdev: System mouse: Device: "/dev/input/event1"
[ 962.281] (--) evdev: System mouse: Vendor 0 Product 0
[ 962.281] (--) evdev: System mouse: Found 12 mouse buttons
[ 962.281] (--) evdev: System mouse: Found scroll wheel(s)
[ 962.281] (--) evdev: System mouse: Found relative axes
[ 962.281] (--) evdev: System mouse: Found x and y relative axes
[ 962.281] (II) evdev: System mouse: Configuring as mouse
[ 962.281] (II) evdev: System mouse: Adding scrollwheel support
[ 962.281] (**) evdev: System mouse: YAxisMapping: buttons 4 and 5
[ 962.281] (**) evdev: System mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 962.281] (**) Option "config_info" "udev:/dev/input/event1"
[ 962.281] (II) XINPUT: Adding extended input device "System mouse" (type: MOUSE, id 7)
[ 962.281] (II) evdev: System mouse: initialized for relative axes.
[ 962.281] (**) System mouse: (accel) keeping acceleration scheme 1
[ 962.281] (**) System mouse: (accel) acceleration profile 0
[ 962.282] (**) System mouse: (accel) acceleration factor: 2.000
[ 962.282] (**) System mouse: (accel) acceleration threshold: 4
[ 962.282] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 962.282] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 962.282] (II) Using input driver 'evdev' for 'Power Button'
[ 962.282] (**) Power Button: always reports core events
[ 962.282] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 962.282] (--) evdev: Power Button: Vendor 0 Product 0
[ 962.282] (--) evdev: Power Button: Found keys
[ 962.282] (II) evdev: Power Button: Configuring as keyboard
[ 962.282] (**) Option "config_info" "udev:/dev/input/event2"
[ 962.282] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 962.282] (**) Option "xkb_rules" "evdev"
[ 962.282] (II) config/udev: Adding input device AT keyboard (/dev/input/event3)
[ 962.282] (**) AT keyboard: Applying InputClass "evdev keyboard catchall"
[ 962.282] (II) Using input driver 'evdev' for 'AT keyboard'
[ 962.282] (**) AT keyboard: always reports core events
[ 962.282] (**) evdev: AT keyboard: Device: "/dev/input/event3"
[ 962.282] (--) evdev: AT keyboard: Vendor 0x1 Product 0x1
[ 962.282] (--) evdev: AT keyboard: Found keys
[ 962.282] (II) evdev: AT keyboard: Configuring as keyboard
[ 962.282] (**) Option "config_info" "udev:/dev/input/event3"
[ 962.282] (II) XINPUT: Adding extended input device "AT keyboard" (type: KEYBOARD, id 9)
[ 962.282] (**) Option "xkb_rules" "evdev"
[ 962.283] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4)
[ 962.283] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 962.283] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 962.283] (**) USB Keyboard: always reports core events
[ 962.283] (**) evdev: USB Keyboard: Device: "/dev/input/event4"
[ 962.283] (--) evdev: USB Keyboard: Vendor 0x46d Product 0xc34b
[ 962.283] (--) evdev: USB Keyboard: Found keys
[ 962.283] (II) evdev: USB Keyboard: Configuring as keyboard
[ 962.283] (**) Option "config_info" "udev:/dev/input/event4"
[ 962.283] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 10)
[ 962.283] (**) Option "xkb_rules" "evdev"
[ 962.283] (II) config/udev: Adding input device Device 2Port KVMSwitcher (/dev/input/event5)
[ 962.283] (**) Device 2Port KVMSwitcher: Applying InputClass "evdev keyboard catchall"
[ 962.283] (II) Using input driver 'evdev' for 'Device 2Port KVMSwitcher'
[ 962.283] (**) Device 2Port KVMSwitcher: always reports core events
[ 962.283] (**) evdev: Device 2Port KVMSwitcher: Device: "/dev/input/event5"
[ 962.283] (--) evdev: Device 2Port KVMSwitcher: Vendor 0x10d5 Product 0x55a2
[ 962.283] (--) evdev: Device 2Port KVMSwitcher: Found keys
[ 962.283] (II) evdev: Device 2Port KVMSwitcher: Configuring as keyboard
[ 962.283] (**) Option "config_info" "udev:/dev/input/event5"
[ 962.283] (II) XINPUT: Adding extended input device "Device 2Port KVMSwitcher" (type: KEYBOARD, id 11)
[ 962.283] (**) Option "xkb_rules" "evdev"
[ 962.283] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event6)
[ 962.283] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 962.283] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 962.283] (**) Logitech USB Optical Mouse: always reports core events
[ 962.284] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event6"
[ 962.284] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[ 962.284] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 962.284] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 962.284] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 962.284] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 962.284] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 962.284] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 962.284] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 962.284] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 962.284] (**) Option "config_info" "udev:/dev/input/event6"
[ 962.284] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 12)
[ 962.284] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 962.284] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 962.284] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 962.284] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 962.284] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 962.309] (II) evdev: Logitech USB Optical Mouse: Close
[ 962.309] (II) UnloadModule: "evdev"
[ 962.309] (II) evdev: Device 2Port KVMSwitcher: Close
[ 962.309] (II) UnloadModule: "evdev"
[ 962.309] (II) evdev: USB Keyboard: Close
[ 962.309] (II) UnloadModule: "evdev"
[ 962.309] (II) evdev: AT keyboard: Close
[ 962.309] (II) UnloadModule: "evdev"
[ 962.309] (II) evdev: Power Button: Close
[ 962.309] (II) UnloadModule: "evdev"
[ 962.309] (II) evdev: System mouse: Close
[ 962.309] (II) UnloadModule: "evdev"
[ 962.309] (II) evdev: System keyboard multiplexer: Close
[ 962.310] (II) UnloadModule: "evdev"
[ 962.359] (II) Server terminated successfully (0). Closing log file.I'm still not sure why this doesn't work. I don't see any errors, but it drops out. Thanks for any help.
