Hi all! I am newbie FreeBSD user and trying to successfully install and run FreeBSD. I have a laptop with Intel HD Graphics 530 (Skylake) and Nvidia GeForce GTX 960M. When I try to startx, I am getting the error I wrote on title. I browsed through forums, found so many people encountered with this error, I applied the solutions on this threads, no help. I'm familar with Linux but never run Xorg on console before. Currently I'm writing this on Linux distro. I dont know how to use internet on console. So here's my Xorg.0.log:
These are the conf files I added under /usr/local/etc/X11/xorg.conf.d/
intel.conf:
screen0.conf
pciconf -lv output:
I tried Xorg -configure, encountered same erroe, after a reading bit, removed xorg.conf.new and error persists. Any suggestions would be welcomed. Thanks.
Code:
[ 445.477]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 445.477] X Protocol Version 11, Revision 0
[ 445.477] Build Operating System: FreeBSD 13.0-CURRENT amd64
[ 445.477] Current Operating System: FreeBSD idris-bsd 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r355121: Wed Nov 27 04:20:46 UTC 2019 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
[ 445.478] Build Date: 30 November 2019 05:58:00AM
[ 445.478]
[ 445.478] Current version of pixman: 0.38.4
[ 445.478] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 445.478] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 445.478] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 4 18:04:49 2019
[ 445.478] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d"
[ 445.479] (==) No Layout section. Using the first Screen section.
[ 445.479] (**) |-->Screen "Screen0" (0)
[ 445.479] (**) | |-->Monitor "<default monitor>"
[ 445.479] (==) No device specified for screen "Screen0".
Using the first device section listed.
[ 445.479] (**) | |-->Device "Intel Graphics"
[ 445.479] (==) No monitor specified for screen "Screen0".
Using a default monitor configuration.
[ 445.479] (==) Automatically adding devices
[ 445.479] (==) Automatically enabling devices
[ 445.479] (==) Not automatically adding GPU devices
[ 445.479] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 445.479] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 445.479] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 445.479] (II) The server relies on devd to provide the list of input devices.
If no devices become available, reconfigure devd or disable AutoAddDevices.
[ 445.480] (II) Loader magic: 0x42a010
[ 445.480] (II) Module ABI versions:
[ 445.480] X.Org ANSI C Emulation: 0.4
[ 445.480] X.Org Video Driver: 20.0
[ 445.480] X.Org XInput driver : 22.1
[ 445.480] X.Org Server Extension : 9.0
[ 445.480] (--) PCI:*(0:0:2:0) 8086:191b:1043:1d3d rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536
[ 445.480] (--) PCI: (0:1:0:0) 10de:139b:1043:1d3d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128
[ 445.480] (II) LoadModule: "glx"
[ 445.480] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 445.484] (II) Module glx: vendor="X.Org Foundation"
[ 445.484] compiled for 1.18.4, module version = 1.0.0
[ 445.484] ABI class: X.Org Server Extension, version 9.0
[ 445.484] (==) AIGLX enabled
[ 445.484] (II) LoadModule: "intel"
[ 445.484] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 445.485] (II) Module intel: vendor="X.Org Foundation"
[ 445.485] compiled for 1.18.4, module version = 2.99.917
[ 445.485] Module class: X.Org Video Driver
[ 445.485] ABI class: X.Org Video Driver, version 20.0
[ 445.485] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 445.485] (II) intel: Driver for Intel(R) HD Graphics
[ 445.485] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 445.485] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 445.486] (--) Using syscons driver with X support (version 2.0)
[ 445.486] (--) using VT number 9
[ 445.499] (EE) No devices detected.
[ 445.499] (EE)
Fatal server error:
[ 445.499] (EE) no screens found(EE)
[ 445.499] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 445.499] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 445.499] (EE)
[ 445.513] (EE) Server terminated with error (1). Closing log file.
These are the conf files I added under /usr/local/etc/X11/xorg.conf.d/
intel.conf:
Code:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "TearFree" "true"
Option "TripleBuffer" "true"
Option "DRI" "true"
BusID "pci0:0:2:0"
EndSection
screen0.conf
Code:
Section "Screen"
Identifier "Screen0"
Device "Card0"
SubSection "Display"
Modes "1920x1080"
EndSubSection
EndSection
pciconf -lv output:
Code:
hostb0@pci0:0:0:0: class=0x060000 rev=0x07 hdr=0x00 vendor=0x8086 device=0x1910 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 rev=0x07 hdr=0x01 vendor=0x8086 device=0x1901 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16)'
class = bridge
subclass = PCI-PCI
vgapci1@pci0:0:2:0: class=0x030000 rev=0x06 hdr=0x00 vendor=0x8086 device=0x191b subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = 'HD Graphics 530'
class = display
subclass = VGA
none0@pci0:0:4:0: class=0x118000 rev=0x07 hdr=0x00 vendor=0x8086 device=0x1903 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem'
class = dasp
xhci0@pci0:0:20:0: class=0x0c0330 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa12f subvendor=0x1043 subdevice=0x201f
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller'
class = serial bus
subclass = USB
none1@pci0:0:20:2: class=0x118000 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa131 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family Thermal Subsystem'
class = dasp
ig4iic0@pci0:0:21:0: class=0x118000 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa160 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family Serial IO I2C Controller'
class = dasp
ig4iic1@pci0:0:21:1: class=0x118000 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa161 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family Serial IO I2C Controller'
class = dasp
none2@pci0:0:22:0: class=0x078000 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa13a subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family MEI Controller'
class = simple comms
ahci0@pci0:0:23:0: class=0x010601 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa103 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = 'HM170/QM170 Chipset SATA Controller [AHCI Mode]'
class = mass storage
subclass = SATA
pcib2@pci0:0:28:0: class=0x060400 rev=0xf1 hdr=0x01 vendor=0x8086 device=0xa112 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:3: class=0x060400 rev=0xf1 hdr=0x01 vendor=0x8086 device=0xa113 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa14e subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = 'HM170 Chipset LPC/eSPI Controller'
class = bridge
subclass = PCI-ISA
none3@pci0:0:31:2: class=0x058000 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa121 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family Power Management Controller'
class = memory
hdac0@pci0:0:31:3: class=0x040300 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa170 subvendor=0x1043 subdevice=0x158f
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family HD Audio Controller'
class = multimedia
subclass = HDA
none4@pci0:0:31:4: class=0x0c0500 rev=0x31 hdr=0x00 vendor=0x8086 device=0xa123 subvendor=0x1043 subdevice=0x1d3d
vendor = 'Intel Corporation'
device = '100 Series/C230 Series Chipset Family SMBus'
class = serial bus
subclass = SMBus
vgapci0@pci0:1:0:0: class=0x030200 rev=0xa2 hdr=0x00 vendor=0x10de device=0x139b subvendor=0x1043 subdevice=0x1d3d
vendor = 'NVIDIA Corporation'
device = 'GM107M [GeForce GTX 960M]'
class = display
subclass = 3D
iwm0@pci0:2:0:0: class=0x028000 rev=0x59 hdr=0x00 vendor=0x8086 device=0x095a subvendor=0x8086 subdevice=0x5110
vendor = 'Intel Corporation'
device = 'Wireless 7265'
class = network
none5@pci0:3:0:0: class=0xff0000 rev=0x01 hdr=0x00 vendor=0x10ec device=0x5287 subvendor=0x1043 subdevice=0x202f
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8411B PCI Express Card Reader'
re0@pci0:3:0:1: class=0x020000 rev=0x12 hdr=0x00 vendor=0x10ec device=0x8168 subvendor=0x1043 subdevice=0x200f
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller'
class = network
subclass = ethernet
I tried Xorg -configure, encountered same erroe, after a reading bit, removed xorg.conf.new and error persists. Any suggestions would be welcomed. Thanks.