Solved Xorg don't work with Radeon HD 8210

deltahotel

deltahotel

hi,
Xorg don't work on Toshiba Satellite C70D.
I try "Xorg -configure" and run with new config but don't work too.

Thanks for your help,
 

Attachments

  • Xorg.txt
    7.6 KB · Views: 152
That graphics adapter doesn’t appear in the supported list, but here in the forum there are reports that it is supported. If haven't done it yet, refresh your pkg repository catalogue or ports tree, install package/port graphics/drm-kmod and read AMD Graphics.

If you have drm-kmod installed and configured, but Xorg won't start, post dmesg and groups (as user who wants to start Xorg).
 
I installed drm-kmod and add the following line to /boot/loader.conf:

hw.syscons.disable=1

after reboot the system freeze at startup...

I'm trying to access loader.conf with the insllation dvd
 
I could not start Xorg after installing drm-kmod

groups
Code: 
pascal video

dmesg
Code: 
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE r341666 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 1600x900
CPU: AMD E1-2100 APU with Radeon(TM) HD Graphics     (998.15-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x700f01  Family=0x16  Model=0x0  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I>
  Structured Extended Features=0x8<BMI1>
  XSAVE Features=0x1<XSAVEOPT>
  SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3519582208 (3356 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <TOSINV TOSINV00>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0: Changing APIC ID to 4
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 998146518 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <TOSINV TOSINV00> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xe0000000-0xefffffff,0xf1800000-0xf1ffffff,0xf1200000-0xf123ffff at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9840) HDA Controller> mem 0xf1240000-0xf1243fff at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x3000-0x30ff mem 0xf3000000-0xf3000fff,0xf0000000-0xf0003fff at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x44800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:8c:fa:9f:f8:dd
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <unknown> at device 0.0 (no driver attached)
xhci0: <AMD FCH USB 3.0 controller> mem 0xf1248000-0xf1249fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table 
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x4118-0x411f,0x4124-0x4127,0x4110-0x4117,0x4120-0x4123,0x4100-0x410f mem 0xf124e000-0xf124e3ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ohci0: <AMD FCH USB Controller> mem 0xf124d000-0xf124dfff at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD FCH USB 2.0 controller> mem 0xf124c000-0xf124c0ff at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD FCH USB Controller> mem 0xf124b000-0xf124bfff at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD FCH USB 2.0 controller> mem 0xf124a000-0xf124a0ff at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
hdac1: <AMD Hudson-2 HDA Controller> mem 0xf1244000-0xf1247fff at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa1
pcm2: <Realtek ALC269 (Internal Analog Mic)> at nid 18 on hdaa1
ugen2.1: <AMD EHCI root HUB> at usbus2
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen4.1: <AMD EHCI root HUB> at usbus4
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <AMD OHCI root HUB> at usbus1
uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen3.1: <AMD OHCI root HUB> at usbus3
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S2R6NB0J373692P
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp CDDVDW SU-208FB TF01> Removable CD-ROM SCSI device
cd0: Serial Number S11S6YLF101ZCA
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub3: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus4 usbus2
uhub2: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
ugen1.2: <USB USB Keyboard> at usbus1
ukbd0 on uhub3
ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1
kbd2 at ukbd0
lo0: link state changed to UP
re0: link state changed to DOWN
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
uhid0 on uhub3
uhid0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1
 
Run kldstat and check if amdgpu.ko and drm.ko modules are listed, if not check /etc/rc.conf if the kld_list line is correct. Should be set like:
Code: 
kld_list=“amdgpu”
or
kld_list=“/boot/modules/amdgpu.ko”

If kldstat lists amdgpu.ko and drm.ko, try the radeonkms.ko module instead. Set in /etc/rc.conf
Code: 
kld_list=“/boot/modules/radeonkms.ko”
Reboot the notebook.

When booting, or afterwards, check dmesg for [drm] messages, similar to the example below.
Code: 
[drm] amdgpu kernel modesetting enabled.
…
[drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1043:0x04C4 0xC1).
[drm] register mmio base: 0xFE600000
[drm] register mmio size: 524288
…
drmn0: successfully loaded firmware image with name: amdgpu/vega10_me.bin
drmn0: successfully loaded firmware image with name: amdgpu/vega10_ce.bin
drmn0: successfully loaded firmware image with name: amdgpu/vega10_rlc.bin
drmn0: successfully loaded firmware image with name: amdgpu/vega10_mec.bin
drmn0: successfully loaded firmware image with name: amdgpu/vega10_mec2.bin
…
[drm] Display Core initialized with v3.1.27!
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-2
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-2
[drm]   - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DVI-D-1
[drm]   - kern.vt.fb.default_mode
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xE0F00000
[drm] vram apper at 0xE0000000
[drm] size 14745600
[drm] fb depth is 24
[drm]    pitch is 10240

Not related to the graphics adapter, on occation update FreeBSD 12.0-RELEASE to 12.0-RELEASE-p3:
freebsd-update fetch
freebsd-update install
 
amdgpu.ko and drm.ko modules are not listed when run kldstat.

Adding to /etc/rc.conf

Code: 
kld_list=“amdgpu”

When booting, I have:

Code: 
...
[drm:uvd_v4_2_start] UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v4_2_start] UVD not responding, giving up!!!
[drm:amdgpu_device_ip_set_powergating_state] set_powergating_state of IP block <uvd_v4_2> failed -1
<6>[drm] amdgpu atom LVDS backlight unloaded


and nothing after that, system freeze
 
Try the radeon.ko module. Set in /etc/rc.conf :
Code: 
kld_list=“/boot/modules/radeonkms.ko”
Don’t forget to unset, or delete the amdpgu module setting.
 
I confirm that Xorg works with this configuration:

/boot/loader.conf
Code: 
hw.syscons.disable=1

and

/etc/rc.conf
Code: 
kld_list="/boot/modules/amdgpu.ko"


thanks a lot for your help!
 
You must log in or register to reply here.
Back
Top