My wireless is not correctly configured by wpa_supplicant(8).
When I run
the wireless card gets associated with the access point, but the process does not get completed. It keeps waiting for some communication that never happens and then when I kill it by Ctrl-C, it disassociates the connection. During the time, it is waiting, I can see that it is associated with AP.
Even if I let it be and run dhclient(8) on wlan0, there is no answer from the router, which may be because there is no real traffic going out (or the authorization is not complete and my AP and router are the same devices).
Could somebody help me, please?
Code:
salil-satellite# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -d
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=2
ap_scan=1
fast_reauth=1
Priority group 5
id=0 ssid='salquestfl'
id=1 ssid=''
Own MAC address: 00:13:02:68:0e:e2
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface wlan0
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauthorized
Received 1272 bytes of scan results (5 BSSes)
BSS: Start scan result update 1
BSS: Add new id 0 BSSID b0:e7:54:b9:47:7a SSID 'SINGTEL-0675'
BSS: Add new id 1 BSSID 72:54:99:49:eb:14 SSID 'HG256-49EB15'
BSS: Add new id 2 BSSID 00:21:91:d9:ff:53 SSID 'sh83137403'
BSS: Add new id 3 BSSID 00:1b:2f:4a:6a:00 SSID 'salquestfl'
BSS: Add new id 4 BSSID 3c:ea:4f:15:d8:11 SSID 'SINGTEL-9805'
New scan results available
Selecting BSS from priority group 5
Try to find WPA-enabled AP
0: b0:e7:54:b9:47:7a ssid='SINGTEL-0675' wpa_ie_len=28 rsn_ie_len=24 caps=0x11
skip - SSID mismatch
skip - SSID mismatch
1: 72:54:99:49:eb:14 ssid='HG256-49EB15' wpa_ie_len=22 rsn_ie_len=0 caps=0x31
skip - SSID mismatch
skip - SSID mismatch
2: 00:21:91:d9:ff:53 ssid='sh83137403' wpa_ie_len=26 rsn_ie_len=24 caps=0x31
skip - SSID mismatch
skip - SSID mismatch
3: 00:1b:2f:4a:6a:00 ssid='salquestfl' wpa_ie_len=0 rsn_ie_len=0 caps=0x31
skip - no WPA/RSN IE
4: 3c:ea:4f:15:d8:11 ssid='SINGTEL-9805' wpa_ie_len=0 rsn_ie_len=0 caps=0x31
skip - no WPA/RSN IE
Try to find non-WPA AP
0: b0:e7:54:b9:47:7a ssid='SINGTEL-0675' wpa_ie_len=28 rsn_ie_len=24 caps=0x11
skip - SSID mismatch
skip - privacy mismatch
1: 72:54:99:49:eb:14 ssid='HG256-49EB15' wpa_ie_len=22 rsn_ie_len=0 caps=0x31
skip - SSID mismatch
skip - privacy mismatch
2: 00:21:91:d9:ff:53 ssid='sh83137403' wpa_ie_len=26 rsn_ie_len=24 caps=0x31
skip - SSID mismatch
skip - privacy mismatch
3: 00:1b:2f:4a:6a:00 ssid='salquestfl' wpa_ie_len=0 rsn_ie_len=0 caps=0x31
selected non-WPA AP 00:1b:2f:4a:6a:00 ssid='salquestfl'
Trying to associate with 00:1b:2f:4a:6a:00 (SSID='salquestfl' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_bsd_set_key: alg=WEP addr=ff:ff:ff:ff:ff:ff key_idx=0 set_tx=1 seq_len=0 key_len=10
State: SCANNING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'salquestfl' wpa ie len 0 pairwise 4 group 4 key mgmt 2
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP fail=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portControl=ForceAuthorized
EAPOL: Supplicant port status: Unauthorized
State: ASSOCIATING -> ASSOCIATED
Associated to a new BSS: BSSID=00:1b:2f:4a:6a:00
Associated with 00:1b:2f:4a:6a:00
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state S_FORCE_AUTH
EAPOL: Supplicant port status: Authorized
EAPOL: SUPP_BE entering state IDLE
Cancelling authentication timeout
State: ASSOCIATED -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to 00:1b:2f:4a:6a:00 completed (auth) [id=0 id_str=]
Cancelling scan request
BSS: Expire BSS 0 due to age
BSS: Remove id 0 BSSID b0:e7:54:b9:47:7a SSID 'SINGTEL-0675'
BSS: Expire BSS 1 due to age
BSS: Remove id 1 BSSID 72:54:99:49:eb:14 SSID 'HG256-49EB15'
BSS: Expire BSS 2 due to age
BSS: Remove id 2 BSSID 00:21:91:d9:ff:53 SSID 'sh83137403'
BSS: Expire BSS 4 due to age
BSS: Remove id 4 BSSID 3c:ea:4f:15:d8:11 SSID 'SINGTEL-9805'
^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
wpa_driver_bsd_deauthenticate
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_del_key: addr=00:1b:2f:4a:6a:00 keyidx=0
ioctl[SIOCS80211, op 20, len 7]: Can't assign requested address
State: COMPLETED -> DISCONNECTED
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
wpa_driver_bsd_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
BSS: Remove id 3 BSSID 00:1b:2f:4a:6a:00 SSID 'salquestfl'
Cancelling scan request
Cancelling authentication timeout
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1When I run
# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -dthe wireless card gets associated with the access point, but the process does not get completed. It keeps waiting for some communication that never happens and then when I kill it by Ctrl-C, it disassociates the connection. During the time, it is waiting, I can see that it is associated with AP.
Code:
salil-satellite# ifconfig wlan0
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:13:02:68:0e:e2
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
status: associated
ssid salquestfl channel 11 (2462 MHz 11g) bssid 00:1b:2f:4a:6a:00
country US authmode OPEN privacy ON deftxkey 1 wepkey 1:104-bit
txpower 0 bmiss 7 scanvalid 60 protmode CTS roaming MANUAL
salil-satellite# ifconfig wlan0 create wlandev wpi0 ssid salquestfl wepmode on wepkey 0x6CA0E03ACB weptxkey 1 up
ifconfig: create: bad valueEven if I let it be and run dhclient(8) on wlan0, there is no answer from the router, which may be because there is no real traffic going out (or the authorization is not complete and my AP and router are the same devices).
Could somebody help me, please?