Wacom without pressure sensitivity

felselva

New Member

Reaction score: 9
Messages: 6

Hi, everyone

I got my Wacom Intuos Draw to work partially. The pen can move the pointer, but there's no pressure sensitivity. Anyone had this problem before and was able to fix?

I've searched in multiple places trying to find a solution.

This case (https://forums.freebsd.org/threads/current-state-of-wacom-tablet-drivers-in-freebsd-11.68253) is similar, but with no solution.

I have installed xf86-input-wacom (tried from the tree and from the ports, no difference), devd, HAL.

This is my /boot/loader.conf:

Code:
legal.realtek.license.ack="1"
webcmd_enable="YES"
cuse_load="YES"
cuse4bsd_load="YES"
if_ath_load="YES"
This is my /etc/rc.conf:

Code:
clear_tmp_enable="YES"
sendmail_enable="NONE"
hostname="bsdmachine"
keymap="br.kbd"
sshd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
kld_list="i915kms"
wlans_ath0="wlan0"
ifconfig_wlan0="WPA SYNCDHCP"
devd_enable="YES"
hald_enable="YES"
dbus_enable="YES"
moused_enable="YES"
moused_nondefault_enable="NO"
webcamd_enable="YES"
wacom_porttype="usb"
wacom_types="stylus eraser"
I don't think wacom_porttype and wacom_types are needed (found in an old thread), but nothing changes without them.

This is my /usr/local/etc/X11/xorg.conf.d/xorg.conf:

Code:
Section "InputClass"
    Identifier    "Touchpad"
    MatchIsTouchpad    "yes"
    Driver        "synaptics"
    Option        "AccelFactor"        "1.0"
    Option        "TapButton1"        "1"
    Option        "TapButton2"        "2"
    Option        "TapButton3"        "3"
    Option        "VertTwoFingerScroll"    "1"
EndSection

Section "InputDevice"
    Identifier    "wacom stylus"
    Driver        "wacom"
    Option        "Type"            "stylus"
    Option        "Device"        "/dev/input/event0"
    Option          "AutoServerLayout"    "true"
    Option        "Mode"            "Relative"
    Option        "PressCurve"        "0,0,100,100"
EndSection

Section "InputDevice"
    Identifier    "wacom eraser"
    Driver        "wacom"
    Option        "Type"            "eraser"
    Option        "Device"        "/dev/input/event0"
    Option          "AutoServerLayout"    "true"
    Option        "PressCurve"        "0,0,100,100"
EndSection

Section "InputDevice"
    Identifier    "wacom pad"
    Driver        "wacom"
    Option        "Type"            "pad"
    Option        "Device"        "/dev/input/event1"
    Option          "AutoServerLayout"    "true"
EndSection
I added PressCurve to see if that would solve the problem, but it didn't. xsetwacom lists the devices normally.
 
Top