Hello-
I have compiled and installed VirtualBox from the ports per the tutorial at http://wiki.freebsd.org/VirtualBox. I imported an Ubuntu 11.10 server image that I have been using on my laptop into VirtualBox and started it headless. However, I cannot ping the guest from the host. The guest is set up with a static ip of 192.168.100.248 .
The version of VirtualBox I am using is below:
The VirtualBox configurations are below:
My host network configuration is here:
Can anybody see what I've done incorrectly?
I have compiled and installed VirtualBox from the ports per the tutorial at http://wiki.freebsd.org/VirtualBox. I imported an Ubuntu 11.10 server image that I have been using on my laptop into VirtualBox and started it headless. However, I cannot ping the guest from the host. The guest is set up with a static ip of 192.168.100.248 .
The version of VirtualBox I am using is below:
Code:
# pkg_info |grep virtual
virtualbox-ose-4.1.10 A general-purpose full virtualizer for x86 hardware
virtualbox-ose-kmod-4.1.10 VirtualBox kernel module for FreeBSDThe VirtualBox configurations are below:
Code:
# VBoxManage showvminfo "Ubuntu 32-bit TimeTrex Server"
Name: Ubuntu 32-bit TimeTrex Server
Guest OS: Ubuntu
UUID: 9da2e521-5e6a-4643-ad8c-15596d96c218
Config file: /root/VirtualBox VMs/Ubuntu 32-bit TimeTrex Server/Ubuntu 32-bit TimeTrex Server.vbox
Snapshot folder: /root/VirtualBox VMs/Ubuntu 32-bit TimeTrex Server/Snapshots
Log folder: /root/VirtualBox VMs/Ubuntu 32-bit TimeTrex Server/Logs
Hardware UUID: 9da2e521-5e6a-4643-ad8c-15596d96c218
Memory size: 512MB
Page Fusion: off
VRAM size: 12MB
CPU exec cap: 100%
HPET: off
Chipset: piix3
Firmware: BIOS
Number of CPUs: 1
Synthetic Cpu: off
CPUID overrides: None
Boot menu mode: message and menu
Boot Device (1): Floppy
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI: on
IOAPIC: off
PAE: off
Time offset: 0 ms
RTC: UTC
Hardw. virt.ext: on
Hardw. virt.ext exclusive: on
Nested Paging: on
Large Pages: off
VT-x VPID: on
State: running (since 2012-03-24T02:18:01.165000000)
Monitor count: 1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Storage Controller Name (0): IDE Controller
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
Storage Controller Name (1): SATA Controller
Storage Controller Type (1): IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 30
Storage Controller Port Count (1): 1
Storage Controller Bootable (1): on
IDE Controller (1, 0): Empty
SATA Controller (0, 0): /root/VirtualBox VMs/Ubuntu 32-bit TimeTrex Server/Ubuntu 32-bit TimeTrex Server-disk1.vmdk
(UUID: 7831ae15-df22-42fe-8f25-02b4b63a10e1)
NIC 1: MAC: 080027F5D777, Attachment: Bridged Interface 're0', Cable connected: on, Trace: off (file: none),
Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
Audio: enabled (Driver: OSS, Controller: AC97)
Clipboard Mode: Bidirectional
Video mode: 640x480x32
VRDE: disabled
USB: enabled
USB Device Filters:
<none>
Available remote USB devices:
<none>
Currently Attached USB Devices:
<none>
Shared folders: <none>
VRDE Connection: not active
Clients so far: 0
Guest:
Configured memory balloon size: 0 MB
OS type: Ubuntu
Additions run level: 0
Guest Facilities:
No active facilities.My host network configuration is here:
Code:
# ifconfig
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 50:e5:49:c2:b1:f7
inet 192.168.100.150 netmask 0xffffff00 broadcast 255.255.255.0
inet6 fe80::52e5:49ff:fec2:b1f7%re0 prefixlen 64 scopeid 0x2
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>Can anybody see what I've done incorrectly?