Hi, I'm unable to get my Logitech Gaming Keyboard G510 to work with FreeBSD 8. It is working in the beastie boot loader but after FreeBSD is booted up, everything seems to be f....ed up Right now, I have the atkbd stuff in /boot/device.hints disabled as I thought, this might interfere with my USB Keyboard but it didn't change anything except that /dev/atkbd0 is now gone. Code: root@kartoffel olivleh1> sysctl -a |grep kbd hw.syscons.kbd_debug: 1 hw.syscons.kbd_reboot: 1 hw.usb.ukbd.no_leds: 0 hw.usb.ukbd.debug: 0 hw.kbd.keymap_restrict_change: 0 dev.ukbd.0.%desc: Logitech G510 Gaming Keyboard, class 0/0, rev 2.00/1.65, addr 2 dev.ukbd.0.%driver: ukbd dev.ukbd.0.%location: bus=1 hubaddr=1 port=0 devaddr=2 interface=0 dev.ukbd.0.%pnpinfo: vendor=0x046d product=0xc22d devclass=0x00 devsubclass=0x00 sernum="" release=0x0165 intclass=0x03 intsubclass=0x01 dev.ukbd.0.%parent: uhub0 root@kartoffel olivleh1> When I try to change the keyboard while being remotly logged in: Code: root@kartoffel olivleh1> kbdcontrol -K < /dev/console kbd1 kbdmux0, type:AT 101/102 (2) root@kartoffel olivleh1> kbdcontrol -i < /dev/console kbd1: kbdmux0, type:AT 101/102 (2) root@kartoffel olivleh1> kbdcontrol -A kbd1 < /dev/console kbd1 kbdmux0, type:AT 101/102 (2) kbdcontrol: unable to (un)mux the keyboard: Device not configured root@kartoffel olivleh1> kbdcontrol -k /dev/ukbd0 < /dev/console > /dev/null kbdcontrol: cannot open /dev/ukbd0: Device busy root@kartoffel olivleh1> No idea what is going on here - shouldn't -K detatch the keyboard? Why is it still attached with -i? Does it reattach automatically, what the heck is kbd1 anyway? ukbd0 is "linked" to kbd2. But what is kbd1?