Hello,
I just installed unbound and now trying it in production after first local test seem fine.
Now that there's some load on it, we now see several timeout (around 1 every 30 requests) and lot of error in log but can't find this error on google.
This was written in log around 101086 times maybe 30 minutes.
Version is 9.0, net.inet.icmp.icmplim have been raise so dmesg don't report any error about this. I know this sysctl can affect bind so I raised it. Unbound version is the paquage available so 1.4.13
I tried to start it with -v -d but no error are shown on screen.
Unbound is also complaining about not enough port available when starting the service, that it's over 1024 and that only around 200-300 are available. I have a dual core + hyper-threading so 4 core and configured it to 4 thread. Each thread by default use up to 256 ports but there are not enough left.
NSD is installed on the same device but listen on a other port and unbound query nsd for local DNS.
Anybody can help on this ?
Thanks.
I just installed unbound and now trying it in production after first local test seem fine.
Now that there's some load on it, we now see several timeout (around 1 every 30 requests) and lot of error in log but can't find this error on google.
Code:
unbound[54539] error: transitioning to response state sans responseVersion is 9.0, net.inet.icmp.icmplim have been raise so dmesg don't report any error about this. I know this sysctl can affect bind so I raised it. Unbound version is the paquage available so 1.4.13
I tried to start it with -v -d but no error are shown on screen.
Code:
netstat -m
1034/1786/2820 mbufs in use (current/cache/total)
1030/982/2012/25600 mbuf clusters in use (current/cache/total/max)
1030/890 mbuf+clusters out of packet secondary zone in use (current/cache)
0/151/151/12800 4k (page size) jumbo clusters in use (current/cache/total/max)
0/0/0/6400 9k jumbo clusters in use (current/cache/total/max)
0/0/0/3200 16k jumbo clusters in use (current/cache/total/max)
2318K/3014K/5333K bytes allocated to network (current/cache/total)
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
0/0/0 requests for jumbo clusters denied (4k/9k/16k)
0/0/0 sfbufs in use (current/peak/max)
0 requests for sfbufs denied
0 requests for sfbufs delayed
0 requests for I/O initiated by sendfile
0 calls to protocol drain routinesUnbound is also complaining about not enough port available when starting the service, that it's over 1024 and that only around 200-300 are available. I have a dual core + hyper-threading so 4 core and configured it to 4 thread. Each thread by default use up to 256 ports but there are not enough left.
NSD is installed on the same device but listen on a other port and unbound query nsd for local DNS.
Anybody can help on this ?
Thanks.