Hello,
I'm trying to configure hast on two computers but I have problems.
The hasta configuration:
The hastb configuration:
The hast.conf (hasta & hastb):
/dev/ad0s1f is a partition of the same size on both machines created during installation.
I type this commands sequence:
and here occurs the problem, the command doesn't return the prompt.
From another console I test the status:
The /var/log/messages
If I try to mount the partition obtain this error
Whats I wrong? Anyone have any ideas?
Thanks
Franco
I'm trying to configure hast on two computers but I have problems.
The hasta configuration:
Code:
hasta# less /etc/rc.conf
keymap="it.iso"
sshd_enable="YES"
ifconfig_bfe0="inet 192.168.1.61 netmask 255.255.255.0"
defaultrouter="192.168.1.1"
hostname="hasta.local"
The hastb configuration:
Code:
hastb# less /etc/rc.conf
keymap="it.iso"
sshd_enable="YES"
ifconfig_xl0="inet 192.168.1.62 netmask 255.255.255.0"
defaultrouter="192.168.1.1"
hostname="hastb.local"
The hast.conf (hasta & hastb):
Code:
hastb# less /etc/hast.conf
resource test {
on hasta {
local /dev/ad0s1f
remote tcp4://192.168.1.62
}
on hastb {
local /dev/ad0s1f
remote tcp4://192.168.1.61
}
}
/dev/ad0s1f is a partition of the same size on both machines created during installation.
I type this commands sequence:
Code:
hasta# hastctl create test
hasta# hastd
hastb# hastctl create test
hastb# hastd
hasta# hastctl role primary test
hastb# hastctl role secondary test
hasta# newfs -U /dev/hast/test
/dev/hast/test: 5120.0MB (10485748 sectors) block size 16384, fragment size 2048
using 28 cylinder groups of 183.77MB, 11761 blks, 23552 inodes.
with soft updates
and here occurs the problem, the command doesn't return the prompt.
From another console I test the status:
Code:
hasta# hastctl status test
test:
role: primary
provname: test
localpath: /dev/ad0s1f
extentsize: 2097152
keepdirty: 64
remoteaddr: tcp4://192.168.1.62
replication: memsync
status: complete
dirty: 5368709120 bytes
hasta#
The /var/log/messages
Code:
Apr 23 09:56:09 hasta hastd: [test] (primary) Remote node acts as init for the resource and not as secondary.
Apr 23 09:56:14 hasta last message repeated 2 times
Apr 23 09:56:19 hasta hastd: [test] (primary) Header contains no 'seq' field.
If I try to mount the partition obtain this error
Code:
hasta# mount -o noatime /dev/hast/test /share/
mount: /dev/hast/test : Operation not permitted
hasta#
Whats I wrong? Anyone have any ideas?
Thanks
Franco