I think the pre-compiled smartmontools-5.42_2 package for 9.0-RELEASE-i386 has a problem. The self-compiled version via ports tree works okay. See below screen output capture.
Is anyone having the same problem? If it is an issue for everyone, who should I report it to?
Is anyone having the same problem? If it is an issue for everyone, who should I report it to?
Code:
$ su
Password:
You have mail.
[B]server1# pkg_add -r smartmontools[/B]
Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-9.0-release/Latest/smartmontools.tbz... Done.
smartmontools has been installed
To check the status of drives, use the following:
/usr/local/sbin/smartctl -a /dev/ad0 for first ATA/SATA drive
/usr/local/sbin/smartctl -a /dev/da0 for first SCSI drive
/usr/local/sbin/smartctl -a /dev/ada0 for first SATA drive
To include drive health information in your daily status reports,
add a line like the following to /etc/periodic.conf:
daily_status_smart_devices="/dev/ad0 /dev/da0"
substituting the appropriate device names for your SMART-capable disks.
To enable drive monitoring, you can use /usr/local/sbin/smartd.
A sample configuration file has been installed as
/usr/local/etc/smartd.conf.sample
Copy this file to /usr/local/etc/smartd.conf and edit appropriately
To have smartd start at boot
echo 'smartd_enable="YES"' >> /etc/rc.conf
[B]server1# /usr/local/sbin/smartctl -a /dev/ada0[/B]
smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE i386] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
error sending CAMIOCOMMAND ioctl: Inappropriate ioctl for device
Unable to get CAM device list
/dev/ada0: Unable to detect device type
Smartctl: please specify device type with the -d option.
Use smartctl -h to get a usage summary
[B]server1# pkg_delete smartmontools-5.42_2[/B]
===> Stopping smartd ...
[B]server1# cd /usr/ports/sysutils/smartmontools/[/B]
[B]server1# make install clean > /dev/null[/B]
smartmontools-5.42.tar.gz 100% of 724 kB 166 kBps
[B]server1# /usr/local/sbin/smartctl -a /dev/ada0[/B]
smartctl 5.42 2011-10-20 r3458 [FreeBSD 9.0-RELEASE i386] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K2000
Device Model: Hitachi HDS722020ALA330
Serial Number: [I]<Deleted-by-me>[/I]
LU WWN Device Id: 5 000cca 221e82bfc
Firmware Version: JKAOA3EA
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Feb 3 14:12:57 2012 HKT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (23212) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 65536
2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 105
3 Spin_Up_Time 0x0007 132 132 024 Pre-fail Always - 564 (Average 532)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 25
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 36
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 9712
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 25
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 341
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 341
194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 23/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8907 -
# 2 Short offline Completed without error 00% 5332 -
# 3 Short offline Completed without error 00% 2763 -
# 4 Short offline Completed without error 00% 149 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[B]server1# uname -i -p -v[/B]
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012
root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 GENERIC