My freeBSD pc keeps rebooting every single night due to "bad dir" trouble.
I have attempted to run
I also used
Just looking to see if any of the pros can help me out
Code:
Jan 8 04:50:17 yeaguy savecore: reboot after panic: ufs_dirbad: /usr: bad dir ino 38850525 at offset 512: mangled entry
Jan 8 04:50:17 yeaguy savecore: writing core to /var/crash/vmcore.9
I have attempted to run
fsck
in single user mode to address the issue but it did not seem to resolve the issue.I also used
smartctl
to see if my hard drive is bad and it seems to pass the test.Just looking to see if any of the pros can help me out
Code:
vic@yeaguy[~]$ df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/ada0p2 194G 10G 168G 6% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/ada0p3 9.7G 5.1G 3.8G 57% /var
/dev/ada0p4 3.9G 625M 2.9G 17% /tmp
/dev/ada0p5 684G 221G 408G 35% /usr
/dev/ada1p1 484G 175G 271G 39% /backup
/dev/ada2p1 451G 158G 257G 38% /storage
/dev/ada2p2 450G 242G 173G 58% /spare
linprocfs 4.0K 4.0K 0B 100% /compat/linux/proc
fdescfs 1.0K 1.0K 0B 100% /dev/fd
procfs 4.0K 4.0K 0B 100% /proc
vic@yeaguy[~]$ sudo smartctl -a /dev/ada0
Password:
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-60ZF5A0
Serial Number: WD-WCC1S3965569
LU WWN Device Id: 5 0014ee 25dc978d2
Firmware Version: 80.00A80
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Jan 8 15:21:43 2018 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10920) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 126) minutes.
SCT capabilities: (0x30bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 177 173 021 Pre-fail Always - 2141
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 163
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 046 046 000 Old_age Always - 39617
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 163
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 093 000 Old_age Always - 7
190 Airflow_Temperature_Cel 0x0022 067 052 040 Old_age Always - 33 (Min/Max 28/36)
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 117
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 45
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 6388 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
vic@yeaguy[~]$