Hi all,
I'm attempting to set up FreeBSD 13 on an Samsung N130 Intel Atom netbook.
My problem is that I cannot get the 'intel' driver to work, the system reverts to using the VESA driver and the screen is stuck at a lower resolution than it is capable of (800 x 600 as opposed to 1024 x 600).
X does start and work without hardware acceleration.
Some system information is attached.
Relevant lines from Xorg.0.log perhaps are:
Thus far I've tried:
Cheers
I'm attempting to set up FreeBSD 13 on an Samsung N130 Intel Atom netbook.
My problem is that I cannot get the 'intel' driver to work, the system reverts to using the VESA driver and the screen is stuck at a lower resolution than it is capable of (800 x 600 as opposed to 1024 x 600).
X does start and work without hardware acceleration.
Some system information is attached.
Relevant lines from Xorg.0.log perhaps are:
Code:
(EE) open /dev/dri/card0: No such file or directory
(WW) Falling back to old probe method for modesettingThus far I've tried:
- Manually setting the modes/resolution as described in section 5.9.2 of the handbook: 'Adding a widescreen flatpanel to the mix'.
- Manually selecting the intel driver with a config file placed at /usr/local/etc/X11/xorg.conf.d/.
- Manually creating /dev/dri and /dev/dri/card0 as described here: https://man.netbsd.org/drm.4
- Using i915.kms module (I'm pretty sure that this is not what I need for the old 945GM graphics this netbook is running...
Cheers