Hello everyone!
As a newcomer here, I hope I'm excused if I forget to mention anything useful in my post.
My problem is this; I have set up a NAS using Zotac H55-ITX, using 6 pcs of 500GB discs; 2 WD GP, and 3 pcs Barracuda 7200.11, and one 7200.12.
All these 6 drives are bunched into a raidz2. Everything is working excellent hardware-wise with those.
But I need a OS-drive too, so I installed a RocketRaid 2300, 4-port PCIe controllercard, which I use for my WD Scorpio Black 320GB. Now this drive is behaving very odd, since it is ticking awfully. And yes, its the Load_Cycle_Count, increasing about 10-20 per minute. Totally not worth it.
I have been googling alot to find a solution to this problem, but nothing seems to work. I have figured out that I need to use "camcontrol cmd.." as presented in another thread here in the matter. (http://forums.freebsd.org/showthread.php?t=8841&highlight=load_cycle_count&page=2)
I think I have gotten the command right, but I cant get it to accept it. I just get an error.
If I disconnect all my drives and put the Scorpio on the MB ports, it still clicks, but the command is working, and the cycles stop afaik. So, I connected one of the ZFS drives to the RR-card instead, but then that drive started to tick instead. I tried both a WD and a Seagate.
Here are some commands, and their output.
Please tell if I missed something vital, and I'll update with needed info.
As a newcomer here, I hope I'm excused if I forget to mention anything useful in my post.
My problem is this; I have set up a NAS using Zotac H55-ITX, using 6 pcs of 500GB discs; 2 WD GP, and 3 pcs Barracuda 7200.11, and one 7200.12.
All these 6 drives are bunched into a raidz2. Everything is working excellent hardware-wise with those.
But I need a OS-drive too, so I installed a RocketRaid 2300, 4-port PCIe controllercard, which I use for my WD Scorpio Black 320GB. Now this drive is behaving very odd, since it is ticking awfully. And yes, its the Load_Cycle_Count, increasing about 10-20 per minute. Totally not worth it.
I have been googling alot to find a solution to this problem, but nothing seems to work. I have figured out that I need to use "camcontrol cmd.." as presented in another thread here in the matter. (http://forums.freebsd.org/showthread.php?t=8841&highlight=load_cycle_count&page=2)
I think I have gotten the command right, but I cant get it to accept it. I just get an error.
If I disconnect all my drives and put the Scorpio on the MB ports, it still clicks, but the command is working, and the cycles stop afaik. So, I connected one of the ZFS drives to the RR-card instead, but then that drive started to tick instead. I tried both a WD and a Seagate.
Here are some commands, and their output.
Code:
([B]These commands are the ones I believe to be correct[/B])
# camcontrol cmd ada0 -a "EF 85 00 00 00 00 00 00 00 00 00 00"
camcontrol: error sending command
# camcontrol cmd 7:0 -a "EF 85 00 00 00 00 00 00 00 00 00 00"
camcontrol: error sending command
# camcontrol devlist
<WDC WD5000AADS-00M2B0 01.00A01> at scbus1 target 0 lun 0 (pass0,ada0)
<ST3500320AS SD1A> at scbus2 target 0 lun 0 (pass1,ada1)
<ST3500418AS CC34> at scbus3 target 0 lun 0 (pass2,ada2)
<ST3500320AS SD1A> at scbus4 target 0 lun 0 (pass3,ada3)
<ST3500320AS SD1A> at scbus5 target 0 lun 0 (pass4,ada4)
<WDC WD5000AACS-00G8B0 05.04C05> at scbus6 target 0 lun 0 (pass5,ada5)
<HPT DISK 0_0 4.00> at scbus7 target 0 lun 0 (pass6,da0)
# smartctl -a -d hpt,1/2 /dev/hptrr
smartctl 5.39.1 2010-01-28 r3054 [FreeBSD 8.1-RELEASE amd64] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Black Serial ATA family
Device Model: WDC WD3200BEKT-22F3T0
Serial Number: WD-WXE708DN4679
Firmware Version: 11.01A11
User Capacity: 320,072,933,376 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Aug 31 12:16:34 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
[...]
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 178 176 021 Pre-fail Always - 2100
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 328
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3627
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 273
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 184
193 Load_Cycle_Count 0x0032 176 176 000 Old_age Always - 73854
194 Temperature_Celsius 0x0022 121 091 000 Old_age Always - 26
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
[...]
Please tell if I missed something vital, and I'll update with needed info.