Realtek ALC888 do not work.

fender0107401

fender0107401

Tow days ago, I have been bought a new computer (just for freebsd, and freebsd is the only one os run on it :e),

Motherboard is ga-ma770ud3(re-1.0), it has an onboard audio card: realtek alc888, accoreding to the snd_hda's manpage this chipset will work with freebsd 7.1, but it doesn't work. :(

dmesg | grep -i pcm
pcm0: <ATI SB600 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
pcm0: [ITHREAD]
pcm0: Audio Function Group not found!
 
No, I compiled the driver directly in the kernel, like this:
################################################################################
# Sound
device sound
device snd_hda
################################################################################
Click to expand...
kldstat
Id Refs Address Size Name
1 1 0xffffffff80100000 67b9d8 kernel
Click to expand...
Without any modules, and I alway do that, even I add this:
# do not build modules with the kernel
NO_MODULES=true
Click to expand...
to my make.conf, and the kernel's compilation time is very short, but without any modules.
 
Do you have matching hdac entries in dmesg -a? I notice that I have very different entries (it's an entirely different card, though)

Code: 
# dmesg -a | grep -E "^(pcm|hdac)"
hdac0: <Intel 82801H High Definition Audio Controller> mem 0xe8044000-0xe8047fff irq 17 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090131_0127
hdac0: [ITHREAD]
hdac0: HDA Codec #0: Analog Devices AD1981HD
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Analog Devices AD1981HD PCM #1 Digital> at cad 0 nid 1 on hdac0
 
Result is:
dmesg -a | grep -E "^(pcm|hdac)"
pcm0: <ATI SB600 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
pcm0: [ITHREAD]
pcm0: Audio Function Group not found!
Click to expand...
:e
 
This particular error message has been removed since 7.1-RELEASE. There's been a big patch on hda since that release, which fixed quite a few issues. it's worthwhile trying RELENG_7.
 
haha

Mel_Flynn said:
This particular error message has been removed since 7.1-RELEASE. There's been a big patch on hda since that release, which fixed quite a few issues. it's worthwhile trying RELENG_7.
Click to expand...

Good new! :e

But I like track release, and 7.1 is good enough except this problem. I can wait for next release.
 
Ps:
Have a problem
Motherboard is GIGABYTE GA-MA770-DS3 (rev. 2.0)
When the USB Moues Support in the BIOS when Enable
Install FreeBSD 7.1 Error code
Code: 
panic ： ohci_add_done ： addr 0x7fe1cd0 not found
cpuid = 0
Uptime : 1s
Cannot dump . No dump device defined.
USB Moues not be able to detect the existence
 
You must log in or register to reply here.
Back
Top