Hello,
I have Raspberry 3B+ whis FreeBSD 12.0-RELEASE instaled on it.
And I use WiFi USB bundle "COMFAST CF-WU810N RTL8188EUS chipset"
It's work fine, only the speed of connection is 100Kb/sec and it doesn't grow.
I have tried changing my card mode to 11b or 11g. But the speed of download/upload is always the same 100Kb/sec.
Its started good but after then speed drops.
Can be a driver problem?
Or usb port does not have enough power for WiFi USB bundle?
I have Raspberry 3B+ whis FreeBSD 12.0-RELEASE instaled on it.
Code:
# uname -a
FreeBSD 12.0-RELEASE FreeBSD 12.0-RELEASE r341666 GENERIC arm64
And I use WiFi USB bundle "COMFAST CF-WU810N RTL8188EUS chipset"
Code:
# kldstat | egrep 'rtwn|wlan'
12 1 0xffff000053441000 41000 if_rtwn_usb.ko
13 6 0xffff000053482000 71000 wlan.ko
14 1 0xffff0000534f3000 41000 rtwn.ko
17 1 0xffff000054800000 41000 wlan_wep.ko
18 1 0xffff000054841000 41000 wlan_tkip.ko
19 1 0xffff000054882000 41000 wlan_ccmp.ko
20 1 0xffff0000548c3000 41000 wlan_amrr.ko
It's work fine, only the speed of connection is 100Kb/sec and it doesn't grow.
Code:
# ifconfig wlan0
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 20:0d:b0:12:a2:ec
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
groups: wlan
ssid SerLanRT channel 2 (2417 MHz 11g ht/20) bssid c0:ac:54:46:62:f3
regdomain FCC country US authmode WPA2/802.11i privacy ON
deftxkey UNDEF AES-CCM 2:128-bit txpower 30 bmiss 7 scanvalid 60
protmode CTS ht20 ampdulimit 64k ampdudensity 8 shortgi -stbc -ldpc
wme roaming MANUAL
media: IEEE 802.11 Wireless Ethernet DS/1Mbps mode 11ng
status: associated
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Code:
# cat /etc/rc.conf
#WLAN
wlans_rtwn0="wlan0"
ifconfig_wlan0="WPA inet 192.168.0.2 netmask 255.255.255.0 ssid SerLanRT mode 11b"
I have tried changing my card mode to 11b or 11g. But the speed of download/upload is always the same 100Kb/sec.
Code:
# ls -lh file.bin
-rw-r--r-- 1 root wheel 100M 22 Sep 16:06 file.bin
# scp file.bin 192.168.0.102:/home/user/Downloads
file.bin 2% 2320KB 1.2MB/s 01:19
file.bin 2% 2320KB 1.1MB/s 01:28
file.bin 2% 2432KB 1.0MB/s 01:36
file.bin 2% 2432KB 929.8KB/s 01:47
file.bin 2% 2432KB 836.8KB/s 01:59
file.bin 2% 2560KB 765.9KB/s 02:10
file.bin 2% 2688KB 702.1KB/s 02:22 ET
file.bin 4% 4096KB 47.5KB/s - stalled -
file.bin 4% 4096KB 42.8KB/s - stalled -
Its started good but after then speed drops.
Can be a driver problem?
Or usb port does not have enough power for WiFi USB bundle?
Last edited by a moderator: