Hi again,
I still can't get my wireless card to work. I have installed it as an ndis (the ralink drivers don't recognise the card):
ifconfig wlan0 up scan fails (and returns nothing)
wpa_supplicant gives no results but keeps scanning with 'Ap scan failed' message (also nothing from wpa_cli) in /var/log/messages.
I updated to 10.0-RC2 to see whether it would help and it now doesn't crash anymore when I bring up wlan0 (yay!!)
I am sure I've missed something really silly but I can't find what it is.
Thanks in advance for your help!
I still can't get my wireless card to work. I have installed it as an ndis (the ralink drivers don't recognise the card):
ifconfig wlan0 up scan fails (and returns nothing)
wpa_supplicant gives no results but keeps scanning with 'Ap scan failed' message (also nothing from wpa_cli) in /var/log/messages.
I updated to 10.0-RC2 to see whether it would help and it now doesn't crash anymore when I bring up wlan0 (yay!!)
I am sure I've missed something really silly but I can't find what it is.
Thanks in advance for your help!
Code:
root@snow:~ # uname -a
FreeBSD snow 10.0-RC2 FreeBSD 10.0-RC2 #0 r259404: Sun Dec 15 11:45:13 UTC 2013 root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
ifconfig:
ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 80:56:f2:6e:82:f9
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 80:56:f2:6e:82:f9
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 1 (2412 MHz 11g) bssid 00:00:00:00:00:00
regdomain 0 country US anywhere -ecm authmode OPEN -wps -tsn
privacy OFF deftxkey UNDEF powersavemode OFF powersavesleep 100
txpower 0 txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346
bmiss 7
11a ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
11b ucast NONE mgmt 11 Mb/s mcast 11 Mb/s maxretry 6
11g ucast NONE mgmt 9 Mb/s mcast 9 Mb/s maxretry 6
turboA ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
turboG ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
sturbo ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
11na ucast NONE mgmt 12 MCS mcast 12 MCS maxretry 6
11ng ucast NONE mgmt 2 MCS mcast 2 MCS maxretry 6
half ucast NONE mgmt 3 Mb/s mcast 3 Mb/s maxretry 6
quarter ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250
roam:11a rssi 7dBm rate 12 Mb/s
roam:11b rssi 7dBm rate 1 Mb/s
roam:11g rssi 7dBm rate 5 Mb/s
roam:turboA rssi 7dBm rate 12 Mb/s
roam:turboG rssi 7dBm rate 12 Mb/s
roam:sturbo rssi 7dBm rate 12 Mb/s
roam:11na rssi 7dBm MCS 1
roam:11ng rssi 7dBm MCS 1
roam:half rssi 7dBm rate 6 Mb/s
roam:quarter rssi 7dBm rate 3 Mb/s
-pureg protmode CTS -ht -htcompat -ampdu ampdulimit 8k
ampdudensity NA -amsdu -shortgi htprotmode RTSCTS -puren smps -rifs
-wme -burst -dwds roaming MANUAL bintval 0
groups: wlan
pciconf:
ndis0@pci0:7:0:0: class=0x028000 card=0x18ec103c chip=0x32901814 rev=0x00 hdr=0x00
vendor = 'Ralink corp.'
class = network
bar [10] = type Memory, range 32, base 0xd3610000, size 65536, enabled
root@snow:~ # ifconfig wlan0 up list scan
root@snow:~ #
from /var/log/messages
Dec 22 19:00:40 snow wpa_supplicant[89239]: wlan0: Failed to initiate AP scan
Dec 22 19:01:11 snow last message repeated 31 times
kldstat:
Id Refs Address Size Name
1 38 0xc0400000 1276b50 kernel
2 2 0xc1677000 eb98 if_ndis.ko
3 3 0xc1686000 20878 ndis.ko
4 1 0xc16a7000 73af28 RT2860_sys.ko
5 1 0xc8abd000 2000 rtc.ko
6 1 0xc8ac7000 4a000 linux.ko
7 1 0xce362000 18000 if_run.ko
8 1 0xce37c000 9000 if_ural.ko
9 1 0xc86d6000 2000 wlan_xauth.ko