X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 1726.176] X Protocol Version 11, Revision 0
[ 1726.176] Build Operating System: FreeBSD 12.1-STABLE amd64
[ 1726.176] Current Operating System: FreeBSD KPECT 12.1-STABLE FreeBSD 12.1-STABLE KPECT amd64
[ 1726.176] Build Date: 16 January 2020 02:20:17PM
[ 1726.176]
[ 1726.176] Current version of pixman: 0.38.4
[ 1726.176] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1726.176] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1726.176] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 17 16:23:59 2020
[ 1726.177] (II) Loader magic: 0x450020
[ 1726.177] (II) Module ABI versions:
[ 1726.177] X.Org ANSI C Emulation: 0.4
[ 1726.177] X.Org Video Driver: 20.0
[ 1726.177] X.Org XInput driver : 22.1
[ 1726.177] X.Org Server Extension : 9.0
[ 1726.177] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216, BIOS @ 0x????????/65536
[ 1726.177] (==) Using default built-in configuration (39 lines)
[ 1726.177] (==) --- Start of built-in configuration ---
[ 1726.177] Section "Device"
[ 1726.177] Identifier "Builtin Default vboxvideo Device 0"
[ 1726.177] Driver "vboxvideo"
[ 1726.177] EndSection
[ 1726.177] Section "Screen"
[ 1726.177] Identifier "Builtin Default vboxvideo Screen 0"
[ 1726.177] Device "Builtin Default vboxvideo Device 0"
[ 1726.177] EndSection
[ 1726.177] Section "Device"
[ 1726.177] Identifier "Builtin Default modesetting Device 0"
[ 1726.177] Driver "modesetting"
[ 1726.177] EndSection
[ 1726.177] Section "Screen"
[ 1726.177] Identifier "Builtin Default modesetting Screen 0"
[ 1726.177] Device "Builtin Default modesetting Device 0"
[ 1726.177] EndSection
[ 1726.177] Section "Device"
[ 1726.177] Identifier "Builtin Default scfb Device 0"
[ 1726.177] Driver "scfb"
[ 1726.177] EndSection
[ 1726.177] Section "Screen"
[ 1726.177] Identifier "Builtin Default scfb Screen 0"
[ 1726.178] Device "Builtin Default scfb Device 0"
[ 1726.178] EndSection
[ 1726.178] Section "Device"
[ 1726.178] Identifier "Builtin Default vesa Device 0"
[ 1726.178] Driver "vesa"
[ 1726.178] EndSection
[ 1726.178] Section "Screen"
[ 1726.178] Identifier "Builtin Default vesa Screen 0"
[ 1726.178] Device "Builtin Default vesa Device 0"
[ 1726.178] EndSection
[ 1726.178] Section "ServerLayout"
[ 1726.178] Identifier "Builtin Default Layout"
[ 1726.178] Screen "Builtin Default vboxvideo Screen 0"
[ 1726.178] Screen "Builtin Default modesetting Screen 0"
[ 1726.178] Screen "Builtin Default scfb Screen 0"
[ 1726.178] Screen "Builtin Default vesa Screen 0"
[ 1726.178] EndSection
[ 1726.178] (==) --- End of built-in configuration ---
[ 1726.178] (==) ServerLayout "Builtin Default Layout"
[ 1726.178] (**) |-->Screen "Builtin Default vboxvideo Screen 0" (0)
[ 1726.178] (**) | |-->Monitor "<default monitor>"
[ 1726.178] (**) | |-->Device "Builtin Default vboxvideo Device 0"
[ 1726.178] (==) No monitor specified for screen "Builtin Default vboxvideo Screen 0".
Using a default monitor configuration.
[ 1726.178] (**) |-->Screen "Builtin Default modesetting Screen 0" (1)
[ 1726.178] (**) | |-->Monitor "<default monitor>"
[ 1726.178] (**) | |-->Device "Builtin Default modesetting Device 0"
[ 1726.178] (==) No monitor specified for screen "Builtin Default modesetting Screen 0".
Using a default monitor configuration.
[ 1726.178] (**) |-->Screen "Builtin Default scfb Screen 0" (2)
[ 1726.178] (**) | |-->Monitor "<default monitor>"
[ 1726.179] (**) | |-->Device "Builtin Default scfb Device 0"
[ 1726.179] (==) No monitor specified for screen "Builtin Default scfb Screen 0".
Using a default monitor configuration.
[ 1726.179] (**) |-->Screen "Builtin Default vesa Screen 0" (3)
[ 1726.179] (**) | |-->Monitor "<default monitor>"
[ 1726.179] (**) | |-->Device "Builtin Default vesa Device 0"
[ 1726.179] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 1726.179] (==) Automatically adding devices
[ 1726.179] (==) Automatically enabling devices
[ 1726.179] (==) Not automatically adding GPU devices
[ 1726.179] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1726.179] (WW) The directory "/usr/local/share/fonts/misc/" does not exist.
[ 1726.179] Entry deleted from font path.
[ 1726.179] (WW) The directory "/usr/local/share/fonts/TTF/" does not exist.
[ 1726.179] Entry deleted from font path.
[ 1726.179] (WW) The directory "/usr/local/share/fonts/OTF/" does not exist.
[ 1726.179] Entry deleted from font path.
[ 1726.179] (WW) The directory "/usr/local/share/fonts/Type1/" does not exist.
[ 1726.179] Entry deleted from font path.
[ 1726.179] (WW) The directory "/usr/local/share/fonts/100dpi/" does not exist.
[ 1726.179] Entry deleted from font path.
[ 1726.179] (WW) The directory "/usr/local/share/fonts/75dpi/" does not exist.
[ 1726.179] Entry deleted from font path.
[ 1726.179] (==) FontPath set to:
catalogue:/usr/local/etc/X11/fontpath.d
[ 1726.179] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 1726.179] (II) The server relies on devd to provide the list of input devices.
If no devices become available, reconfigure devd or disable AutoAddDevices.
[ 1726.179] (II) LoadModule: "glx"
[ 1726.180] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 1726.181] (II) Module glx: vendor="X.Org Foundation"
[ 1726.181] compiled for 1.18.4, module version = 1.0.0
[ 1726.181] ABI class: X.Org Server Extension, version 9.0
[ 1726.181] (==) AIGLX enabled
[ 1726.181] (II) LoadModule: "vboxvideo"
[ 1726.181] (II) Loading /usr/local/lib/xorg/modules/drivers/vboxvideo_drv.so
[ 1726.181] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 1726.181] compiled for 1.18.4, module version = 1.0.1
[ 1726.181] Module class: X.Org Video Driver
[ 1726.181] ABI class: X.Org Video Driver, version 20.0
[ 1726.181] (**) Load address of symbol "VBOXVIDEO" is 0x801b70020
[ 1726.181] (II) LoadModule: "modesetting"
[ 1726.181] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so
[ 1726.181] (II) Module modesetting: vendor="X.Org Foundation"
[ 1726.181] compiled for 1.18.4, module version = 1.18.4
[ 1726.181] Module class: X.Org Video Driver
[ 1726.181] ABI class: X.Org Video Driver, version 20.0
[ 1726.181] (II) LoadModule: "scfb"
[ 1726.181] (WW) Warning, couldn't open module scfb
[ 1726.181] (II) UnloadModule: "scfb"
[ 1726.181] (II) Unloading scfb
[ 1726.182] (EE) Failed to load module "scfb" (module does not exist, 0)
[ 1726.182] (II) LoadModule: "vesa"
[ 1726.182] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 1726.182] (II) Module vesa: vendor="X.Org Foundation"
[ 1726.182] compiled for 1.18.4, module version = 2.4.0
[ 1726.182] Module class: X.Org Video Driver
[ 1726.182] ABI class: X.Org Video Driver, version 20.0
[ 1726.182] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 1726.182] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1726.182] (II) VESA: driver for VESA chipsets: vesa
[ 1726.182] (--) Using syscons driver with X support (version 2.0)
[ 1726.182] (--) using VT number 9
[ 1726.182] (WW) Falling back to old probe method for modesetting
[ 1726.182] (EE) open /dev/dri/card0: No such file or directory
[ 1726.182] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 1726.182] (II) VBoxVideo(0): VirtualBox guest additions video driver version 5.2
[ 1726.182] (II) Loading sub module "ramdac"
[ 1726.182] (II) LoadModule: "ramdac"
[ 1726.183] (II) Module "ramdac" already built-in
[ 1726.183] (II) Loading sub module "fb"
[ 1726.183] (II) LoadModule: "fb"
[ 1726.183] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 1726.183] (II) Module fb: vendor="X.Org Foundation"
[ 1726.183] compiled for 1.18.4, module version = 1.0.0
[ 1726.183] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1726.183] (II) Loading sub module "shadowfb"
[ 1726.183] (II) LoadModule: "shadowfb"
[ 1726.183] (II) Loading /usr/local/lib/xorg/modules/libshadowfb.so
[ 1726.183] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1726.183] compiled for 1.18.4, module version = 1.0.0
[ 1726.183] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1726.183] (II) Loading sub module "vgahw"
[ 1726.183] (II) LoadModule: "vgahw"
[ 1726.183] (II) Loading /usr/local/lib/xorg/modules/libvgahw.so
[ 1726.184] (II) Module vgahw: vendor="X.Org Foundation"
[ 1726.184] compiled for 1.18.4, module version = 0.1.0
[ 1726.184] ABI class: X.Org Video Driver, version 20.0
[ 1726.184] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Builtin Default vboxvideo Screen 0" for depth/fbbpp 24/32
[ 1726.184] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 1726.184] (--) VBoxVideo(0): Virtual size is 32766x32766 (pitch 32766)
[ 1726.184] (**) VBoxVideo(0): Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 1726.184] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 1726.184] (**) VBoxVideo(0): Built-in mode "800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 1726.184] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 1726.184] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 1726.184] (==) VBoxVideo(0): RGB weight 888
[ 1726.184] (==) VBoxVideo(0): Default visual is TrueColor
[ 1726.184] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1726.184] (==) VBoxVideo(0): DPI set to (96, 96)
[ 1726.184] (II) UnloadModule: "modesetting"
[ 1726.184] (II) Unloading modesetting
[ 1726.184] (II) UnloadModule: "vesa"
[ 1726.184] (II) Unloading vesa
[ 1726.184] (--) Depth 24 pixmap format is 32 bpp
[ 1726.721] (II) VBoxVideo(0): Requested monitor count: 1
[ 1726.721] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[ 1726.722] (II) VBoxVideo(0): Output VGA-0 has no monitor section
[ 1726.722] (II) VBoxVideo(0): EDID for output VGA-0
[ 1726.722] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 39322400
[ 1726.722] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 1726.722] (II) VBoxVideo(0): EDID Version: 1.3
[ 1726.722] (II) VBoxVideo(0): Digital Display Input
[ 1726.722] (II) VBoxVideo(0): Indeterminate output size
[ 1726.722] (II) VBoxVideo(0): Gamma: 2.20
[ 1726.722] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 1726.722] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1726.722] (II) VBoxVideo(0): Default color space is primary color space
[ 1726.722] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 1726.722] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 1726.722] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 1726.722] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 1726.722] (II) VBoxVideo(0): Supported detailed timing:
[ 1726.722] (II) VBoxVideo(0): clock: 29.3 MHz Image Size: 0 x 0 mm
[ 1726.722] (II) VBoxVideo(0): h_active: 800 h_sync: 802 h_sync_end 804 h_blank_end 806 h_border: 0
[ 1726.722] (II) VBoxVideo(0): v_active: 600 v_sync: 602 v_sync_end 604 v_blanking: 606 v_border: 0
[ 1726.722] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 1726.722] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 1726.722] (II) VBoxVideo(0): EDID (in hex):
[ 1726.722] (II) VBoxVideo(0): 00ffffffffffff005858000020035802
[ 1726.722] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 1726.722] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 1726.722] (II) VBoxVideo(0): 010101010101720b2006305806200202
[ 1726.722] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 1726.722] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 1726.723] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 1726.723] (II) VBoxVideo(0): 000a2020202020202020202020200071
[ 1726.723] (II) VBoxVideo(0): Printing probed modes for output VGA-0
[ 1726.723] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz Pb)
[ 1726.723] (II) VBoxVideo(0): Modeline "2560x1600"x60.0 247.26 2560 2562 2564 2566 1600 1602 1604 1606 (96.4 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "2560x1440"x60.0 222.63 2560 2562 2564 2566 1440 1442 1444 1446 (86.8 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "2048x1536"x60.0 190.04 2048 2050 2052 2054 1536 1538 1540 1542 (92.5 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "1920x1600"x60.0 185.59 1920 1922 1924 1926 1600 1602 1604 1606 (96.4 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "1920x1080"x60.0 125.50 1920 1922 1924 1926 1080 1082 1084 1086 (65.2 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "1600x1200"x60.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "1680x1050"x60.0 106.82 1680 1682 1684 1686 1050 1052 1054 1056 (63.4 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "1400x1050"x60.0 89.08 1400 1402 1404 1406 1050 1052 1054 1056 (63.4 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "1280x1024"x60.0 79.47 1280 1282 1284 1286 1024 1026 1028 1030 (61.8 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 1726.723] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 1726.723] (II) VBoxVideo(0): Output VGA-0 connected
[ 1726.723] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 1726.723] (II) VBoxVideo(0): Output VGA-0 using initial mode 800x600 +0+0
[ 1726.723] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1726.723] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1726.724] (==) VBoxVideo(0): DPMS enabled
[ 1726.724] (--) RandR disabled
[ 1726.729] (II) AIGLX: Screen 0 is not DRI2 capable
[ 1726.730] (EE) AIGLX: reverting to software rendering
[ 1726.734] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1726.734] (II) AIGLX: Loaded and initialized swrast
[ 1726.735] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 1726.735] (II) VBoxVideo(0): Setting screen physical size to 211 x 158
[ 1726.806] (II) config/devd: probing input devices...
[ 1726.806] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 1726.806] (II) LoadModule: "kbd"
[ 1726.806] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 1726.806] (II) Module kbd: vendor="X.Org Foundation"
[ 1726.806] compiled for 1.18.4, module version = 1.9.0
[ 1726.806] Module class: X.Org XInput Driver
[ 1726.806] ABI class: X.Org XInput driver, version 22.1
[ 1726.806] (II) Using input driver 'kbd' for 'kbdmux'
[ 1726.806] (**) kbdmux: always reports core events
[ 1726.806] (**) kbdmux: always reports core events
[ 1726.806] (**) Option "Protocol" "standard"
[ 1726.806] (**) Option "XkbRules" "base"
[ 1726.806] (**) Option "XkbModel" "pc105"
[ 1726.806] (**) Option "XkbLayout" "us"
[ 1726.806] (**) Option "config_info" "devd:kbdmux"
[ 1726.806] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[ 1726.807] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
[ 1726.807] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 1726.807] (II) LoadModule: "mouse"
[ 1726.807] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 1726.807] (II) Module mouse: vendor="X.Org Foundation"
[ 1726.807] compiled for 1.18.4, module version = 1.9.3
[ 1726.807] Module class: X.Org XInput Driver
[ 1726.807] ABI class: X.Org XInput driver, version 22.1
[ 1726.807] (II) Using input driver 'mouse' for 'sysmouse'
[ 1726.807] (**) sysmouse: always reports core events
[ 1726.807] (**) Option "Device" "/dev/sysmouse"
[ 1726.807] (==) sysmouse: Protocol: "Auto"
[ 1726.808] (**) sysmouse: always reports core events
[ 1726.808] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 1726.808] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 1726.808] (**) sysmouse: Buttons: 5
[ 1726.808] (**) Option "config_info" "devd:sysmouse"
[ 1726.808] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[ 1726.808] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 1726.808] (**) sysmouse: (accel) acceleration profile 0
[ 1726.808] (**) sysmouse: (accel) acceleration factor: 2.000
[ 1726.808] (**) sysmouse: (accel) acceleration threshold: 4
[ 1726.808] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 1726.808] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 1726.840] (II) config/devd: adding input device Mouse (/dev/psm0)
[ 1726.840] (II) Using input driver 'mouse' for 'Mouse'
[ 1726.840] (**) Mouse: always reports core events
[ 1726.840] (**) Option "Device" "/dev/psm0"
[ 1726.840] (==) Mouse: Protocol: "Auto"
[ 1726.840] (**) Mouse: always reports core events
[ 1726.873] (==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
[ 1726.873] (**) Mouse: ZAxisMapping: buttons 4 and 5
[ 1726.873] (**) Mouse: Buttons: 5
[ 1726.873] (**) Option "config_info" "devd:psm0"
[ 1726.873] (II) XINPUT: Adding extended input device "Mouse" (type: MOUSE, id 8)
[ 1726.873] (**) Mouse: (accel) keeping acceleration scheme 1
[ 1726.873] (**) Mouse: (accel) acceleration profile 0
[ 1726.873] (**) Mouse: (accel) acceleration factor: 2.000
[ 1726.873] (**) Mouse: (accel) acceleration threshold: 4
[ 1726.879] (II) Mouse: SetupAuto: hw.iftype is 3, hw.model is 10
[ 1726.879] (II) Mouse: SetupAuto: protocol is ExplorerPS/2
[ 1727.247] (II) Mouse: ps2EnableDataReporting: succeeded
[ 1727.247] (II) config/devd: device /dev/vboxguest0 already opened
[ 1727.247] (II) config/devd: adding input device (null) (/dev/vboxguest)
[ 1727.247] (II) LoadModule: "vboxmouse"
[ 1727.247] (II) Loading /usr/local/lib/xorg/modules/input/vboxmouse_drv.so
[ 1727.247] (II) Module vboxmouse: vendor="Oracle Corporation"
[ 1727.247] compiled for 0.0.0, module version = 1.0.0
[ 1727.247] Module class: X.Org XInput Driver
[ 1727.247] ABI class: X.Org XInput driver, version 22.1
[ 1727.247] (**) Load address of symbol "VBOXMOUSE" is 0x8039d9018
[ 1727.247] (II) Using input driver 'vboxmouse' for 'vboxguest'
[ 1727.248] (**) vboxguest: always reports core events
[ 1727.248] (**) Option "Device" "/dev/vboxguest"
[ 1727.248] (**) vboxguest: Device: "/dev/vboxguest"
[ 1727.248] (**) Option "config_info" "devd:vboxguest"
[ 1727.248] (II) XINPUT: Adding extended input device "vboxguest" (type: MOUSE, id 9)
[ 1727.248] (**) vboxguest: (accel) keeping acceleration scheme 1
[ 1727.248] (**) vboxguest: (accel) acceleration profile 0
[ 1727.248] (**) vboxguest: (accel) acceleration factor: 2.000
[ 1727.248] (**) vboxguest: (accel) acceleration threshold: 4
[ 1727.248] (II) vboxguest: On.
[ 1727.248] (WW) fcntl(11, O_ASYNC): Invalid argument
[ 1727.249] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 1727.249] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync.
[ 1727.249] (II) VBoxVideo(0): Using hsync ranges from config file
[ 1727.249] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 1727.249] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 1727.249] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.30 800 802 804 806 600 602 604 606 -hsync -vsync (36.4 kHz eP)
[ 1727.393] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 1727.393] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync.
[ 1727.393] (II) VBoxVideo(0): Using hsync ranges from config file
[ 1727.393] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 1727.393] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 1727.393] (II) VBoxVideo(0): Modeline "800x600"x0.0 29.30 800 802 804 806 600 602 604 606 -hsync -vsync (36.4 kHz eP)