I was doing fine for a while now remember I am new to this so I am not as sharp for most of you to be.
Most of my drives I mount manually I was able to have working good eg:
Where is W and X on my drives here?
I can not to find them for mounting
Those 2 drives X and Y are mounted but not Z and W Drive
But when I do
I get
I only want to mount 4 drives I know one of them is MBR but also I have to keep changing the letter each boot up it does not remember how. Unless you can show me to put in /etc/fstab correctly to always boot the same drives.
Code:
camcontrol devlist
<HITACHI HUA723030ALA640 MKAONS01> at scbus3 target 0 lun 0 (pass0,ada0)
<Hitachi HDS723030ALA640 MKAOA3B0> at scbus4 target 0 lun 0 (pass1,ada1)
<TOSHIBA DT01ACA200 MX4OABB0> at scbus5 target 0 lun 0 (pass2,ada2)
<Hitachi HUA722020ALA331 JKAOA3NH> at scbus6 target 0 lun 0 (pass3,ada3)
<HITACHI HUA723030ALA640 MKAONS01> at scbus7 target 0 lun 0 (pass4,ada4)
<Generic STORAGE DEVICE 9451> at scbus8 target 0 lun 0 (da0,pass5)
Most of my drives I mount manually I was able to have working good eg:
ntfs-3g /dev/ada3p1 /media/X:
ntfs-3g /dev/ada1p1 /media/Y:
Where is W and X on my drives here?
I can not to find them for mounting
Those 2 drives X and Y are mounted but not Z and W Drive
But when I do
ntfs-3g /dev/ada4p2 /media/W:
, it says to me, No such file or directory ntfs-3g /dev/ada1s1 /media/Z:
I get
Code:
gpart show ada0
=> 63 4294967232 ada0 MBR (2.7T)
63 1985 - free - (993K)
2048 4294963200 1 ntfs (2.0T)
4294965248 2047 - free - (1.0M)
Code:
Usage: ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
Options: ro (read-only mount), windows_names, uid=, gid=,
umask=, fmask=, dmask=
Usage: ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
Options: ro (read-only mount), windows_names, uid=, gid=,
umask=, fmask=, dmask=, streams_interface=.
Please see the details in the manual (type: man ntfs-3g).
Example: ntfs-3g /dev/sda1 /mnt/windows
, streams_interface=.
Please see the details in the manual (type: man ntfs-3g).
Example: ntfs-3g /dev/sda1 /mnt/windows
Code:
gpart show
=> 63 4294967232 ada0 MBR (2.7T)
63 1985 - free - (993K)
2048 4294963200 1 ntfs (2.0T)
4294965248 2047 - free - (1.0M)
=> 63 4294967232 diskid/DISK-YXGDW2UK MBR (2.7T)
63 1985 - free - (993K)
2048 4294963200 1 ntfs (2.0T)
4294965248 2047 - free - (1.0M)
=> 34 5860533101 ada1 GPT (2.7T)
34 94 - free - (47K)
128 5860533007 1 ms-basic-data (2.7T)
=> 40 3907029088 ada2 GPT (1.8T)
40 512 1 freebsd-boot (256K)
552 3901784064 2 freebsd-ufs (1.8T)
3901784616 5234688 3 freebsd-swap (2.5G)
3907019304 9824 - free - (4.8M)
=> 34 3907029101 ada3 GPT (1.8T)
34 264158 - free - (129M)
264192 3906764800 1 ms-basic-data (1.8T)
3907028992 143 - free - (72K)
=> 34 5860533101 ada4 GPT (2.7T)
34 262144 1 ms-reserved (128M)
262178 2014 - free - (1.0M)
264192 5860268032 2 ms-basic-data (2.7T)
5860532224 911 - free - (456K)
I only want to mount 4 drives I know one of them is MBR but also I have to keep changing the letter each boot up it does not remember how. Unless you can show me to put in /etc/fstab correctly to always boot the same drives.