Problems detecting Marvell 9128 SATA chip

larrifax

New Member


Messages: 5

Hi,

I am having some problems detecting my Marvell 9128 chip on my Gigabyte GA-X58A-UD3R motherboard. Both the Intel chip and the JMicron chip on the card is detected, and AHCI is enabled for all three chips. I have also connected a OCZ Agility 3 SSD that is detected in the BIOS, but not in FreeBSD (of course). Any ideas on how I can detect the Marvell 9128 chip and the SSD?

Code:
[larrifax@larriserver:~] $ uname -a
FreeBSD larriserver.larrinett 8.2-STABLE FreeBSD 8.2-STABLE #4: Tue Aug 16 21:17:06 CEST 2011 
    root@larriserver.larrinett:/usr/obj/usr/src/sys/LARRISERVER  amd64
Output of dmesg | grep ahci
Code:
ahci0: <AHCI SATA controller> port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem
 0xfbbff000-0xfbbff7ff irq 16 at device 0.0 on pci1
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich6: [ITHREAD]
ahcich7: <AHCI channel> at channel 7 on ahci0
ahcich7: [ITHREAD]
ahci1: <JMicron JMB363 AHCI SATA controller> mem 0xfbefe000-0xfbefffff irq 17 at
 device 0.0 on pci5
ahci1: [ITHREAD]
ahci1: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahcich8: <AHCI channel> at channel 0 on ahci1
ahcich8: [ITHREAD]
ahcich9: <AHCI channel> at channel 1 on ahci1
ahcich9: [ITHREAD]
ahci2: <JMicron JMB363 AHCI SATA controller> on atapci1
ahci2: [ITHREAD]
ahci2: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahcich10: <AHCI channel> at channel 0 on ahci2
ahcich10: [ITHREAD]
ahcich11: <AHCI channel> at channel 1 on ahci2
ahcich11: [ITHREAD]
ahci3: <Intel ICH10 AHCI SATA controller> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf51f mem
 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0
ahci3: [ITHREAD]
ahci3: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich12: <AHCI channel> at channel 0 on ahci3
ahcich12: [ITHREAD]
ahcich13: <AHCI channel> at channel 1 on ahci3
ahcich13: [ITHREAD]
ahcich14: <AHCI channel> at channel 2 on ahci3
ahcich14: [ITHREAD]
ahcich15: <AHCI channel> at channel 3 on ahci3
ahcich15: [ITHREAD]
ahcich16: <AHCI channel> at channel 4 on ahci3
ahcich16: [ITHREAD]
ahcich17: <AHCI channel> at channel 5 on ahci3
ahcich17: [ITHREAD]
(aprobe0:ahcich0:0:0:0): Unexpected signature 0xfccf
ahcich7: Poll timeout on slot 0 port 0
ahcich7: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 50 serr 00000000
 cmd 10000016
ada0 at ahcich12 bus 0 scbus12 target 0 lun 0
ada1 at ahcich13 bus 0 scbus13 target 0 lun 0
ada2 at ahcich14 bus 0 scbus14 target 0 lun 0
ada3 at ahcich15 bus 0 scbus15 target 0 lun 0
ada4 at ahcich16 bus 0 scbus16 target 0 lun 0
ada5 at ahcich17 bus 0 scbus17 target 0 lun 0
In my loader.conf I have:
Code:
mvs_load="YES"
 

mav@

Aspiring Daemon
Developer

Reaction score: 218
Messages: 702

This line of Marvell controllers require specific quirks to be activaed in a driver, that probably haven't happen with your controller, looking on
Code:
ahci0: <AHCI SATA controller>
Maybe your controller has some new PCI ID. Show please output of the [cmd=]pciconf -lvcb[/cmd]
 
OP
OP
larrifax

larrifax

New Member


Messages: 5

The output of that command is too long to be pasted in one post, so I'm splitting it up into two posts.

This is the output of [CMD="pciconf"] -lvcb[/CMD]

Code:
hostb0@pci0:0:0:0:	class=0x060000 card=0x50001458 chip=0x34058086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Architecture I/O Hub to ESI Port'
    class      = bridge
    subclass   = HOST-PCI
    cap 05[60] = MSI supports 2 messages, vector masks 
    cap 10[90] = PCI-Express 2 root port max data 128(128) link x4(x4)
    cap 01[e0] = powerspec 3  supports D0 D3  current D0
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 000d[150] = unknown 1
ecap 000b[160] = unknown 0
pcib1@pci0:0:1:0:	class=0x060400 card=0x50011458 chip=0x34088086 rev=0x13 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Architecture I/O Hub PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[40] = PCI Bridge card=0x50011458
    cap 05[60] = MSI supports 2 messages, vector masks 
    cap 10[90] = PCI-Express 2 root port max data 256(256) link x1(x2)
    cap 01[e0] = powerspec 3  supports D0 D3  current D0
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 000d[150] = unknown 1
ecap 000b[160] = unknown 0
pcib2@pci0:0:2:0:	class=0x060400 card=0x50011458 chip=0x34098086 rev=0x13 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Architecture I/O Hub PCI Express Root Port 2'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[40] = PCI Bridge card=0x50011458
    cap 05[60] = MSI supports 2 messages, vector masks 
    cap 10[90] = PCI-Express 2 root port max data 128(256) link x1(x2)
    cap 01[e0] = powerspec 3  supports D0 D3  current D0
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 000d[150] = unknown 1
pcib3@pci0:0:3:0:	class=0x060400 card=0x50011458 chip=0x340a8086 rev=0x13 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Architecture I/O Hub PCI Express Root Port 3'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[40] = PCI Bridge card=0x50011458
    cap 05[60] = MSI supports 2 messages, vector masks 
    cap 10[90] = PCI-Express 2 root port max data 256(256) link x16(x16)
    cap 01[e0] = powerspec 3  supports D0 D3  current D0
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 000d[150] = unknown 1
ecap 000b[160] = unknown 0
none0@pci0:0:16:0:	class=0x080000 card=0x00000000 chip=0x34258086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Interconnect Physical and Link Layer Registers - Port 0'
    class      = base peripheral
    subclass   = interrupt controller
    cap 09[50] = vendor (length 255) Intel cap 15 version 0
none1@pci0:0:16:1:	class=0x080000 card=0x00000000 chip=0x34268086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Interconnect Routing and Protocol Layer Registers - Port 0'
    class      = base peripheral
    subclass   = interrupt controller
none2@pci0:0:17:0:	class=0x080000 card=0x00000000 chip=0x34278086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Interconnect Physical and Link Layer Registers - Port 1'
    class      = base peripheral
    subclass   = interrupt controller
    cap 00[50] = unknown
none3@pci0:0:17:1:	class=0x080000 card=0x00000000 chip=0x34288086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Interconnect Routing & Protocol Layer Registers - Port 1'
    class      = base peripheral
    subclass   = interrupt controller
ioapic0@pci0:0:19:0:	class=0x080020 card=0x00000000 chip=0x342d8086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Architecture I/O Hub I/OxAPIC Interrupt Controller'
    class      = base peripheral
    subclass   = interrupt controller
    bar   [10] = type Memory, range 32, base 0xfbfff000, size 4096, enabled
    cap 01[6c] = powerspec 3  supports D0 D3  current D0
none4@pci0:0:20:0:	class=0x080000 card=0x00000000 chip=0x342e8086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Architecture I/O Hub System Management Registers'
    class      = base peripheral
    subclass   = interrupt controller
    cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
none5@pci0:0:20:1:	class=0x080000 card=0x00000000 chip=0x34228086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers'
    class      = base peripheral
    subclass   = interrupt controller
    cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
none6@pci0:0:20:2:	class=0x080000 card=0x00000000 chip=0x34238086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'QuickPath Architecture I/O Hub Control Status and RAS Registers'
    class      = base peripheral
    subclass   = interrupt controller
    cap 10[40] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
ioapic1@pci0:0:21:0:	class=0x080020 card=0x00000000 chip=0x342f8086 rev=0x13 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Trusted Execution Technology Registers'
    class      = base peripheral
    subclass   = interrupt controller
uhci0@pci0:0:26:0:	class=0x0c0300 card=0x50041458 chip=0x3a378086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *4'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xff00, size 32, enabled
    cap 13[50] = PCI Advanced Features: FLR TP
uhci1@pci0:0:26:1:	class=0x0c0300 card=0x50041458 chip=0x3a388086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *5'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xfe00, size 32, enabled
    cap 13[50] = PCI Advanced Features: FLR TP
uhci2@pci0:0:26:2:	class=0x0c0300 card=0x50041458 chip=0x3a398086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *6'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xfd00, size 32, enabled
    cap 13[50] = PCI Advanced Features: FLR TP
ehci0@pci0:0:26:7:	class=0x0c0320 card=0x50061458 chip=0x3a3c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB EHCI Controller *2'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfbffe000, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 13[98] = PCI Advanced Features: FLR TP
none7@pci0:0:27:0:	class=0x040300 card=0xa1021458 chip=0x3a3e8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Microsoft UAA Bus Driver for High Definition Audio (Microsoft UAA Bus Driver for High Definition Audio)'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xfbff4000, size 16384, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 05[60] = MSI supports 1 message, 64 bit 
    cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0)
ecap 0002[100] = VC 1 max VC1
ecap 0005[130] = unknown 1
pcib4@pci0:0:28:0:	class=0x060400 card=0x50011458 chip=0x3a408086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 1'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
    cap 05[80] = MSI supports 1 message 
    cap 0d[90] = PCI Bridge card=0x50011458
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC0
ecap 0005[180] = unknown 1
pcib5@pci0:0:28:1:	class=0x060400 card=0x50011458 chip=0x3a428086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 2'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
    cap 05[80] = MSI supports 1 message 
    cap 0d[90] = PCI Bridge card=0x50011458
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC0
ecap 0005[180] = unknown 1
pcib6@pci0:0:28:3:	class=0x060400 card=0x50011458 chip=0x3a468086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 4'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
    cap 05[80] = MSI supports 1 message 
    cap 0d[90] = PCI Bridge card=0x50011458
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC0
ecap 0005[180] = unknown 1
pcib7@pci0:0:28:4:	class=0x060400 card=0x50011458 chip=0x3a488086 rev=0x00 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'PCI Express Port 5'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
    cap 05[80] = MSI supports 1 message 
    cap 0d[90] = PCI Bridge card=0x50011458
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC0
ecap 0005[180] = unknown 1
uhci3@pci0:0:29:0:	class=0x0c0300 card=0x50041458 chip=0x3a348086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *1'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xfc00, size 32, enabled
    cap 13[50] = PCI Advanced Features: FLR TP
 
OP
OP
larrifax

larrifax

New Member


Messages: 5

Code:
uhci4@pci0:0:29:1:	class=0x0c0300 card=0x50041458 chip=0x3a358086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *2'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xfb00, size 32, enabled
    cap 13[50] = PCI Advanced Features: FLR TP
uhci5@pci0:0:29:2:	class=0x0c0300 card=0x50041458 chip=0x3a368086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB UHCI Controller *3'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xfa00, size 32, enabled
    cap 13[50] = PCI Advanced Features: FLR TP
ehci1@pci0:0:29:7:	class=0x0c0320 card=0x50061458 chip=0x3a3a8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'USB EHCI Controller *1'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xfbffd000, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 13[98] = PCI Advanced Features: FLR TP
pcib8@pci0:0:30:0:	class=0x060401 card=0x50001458 chip=0x244e8086 rev=0x90 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[50] = PCI Bridge card=0x50001458
isab0@pci0:0:31:0:	class=0x060100 card=0x50011458 chip=0x3a168086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
		 features: SATA RAID-5, 4 PCI-e x1 slots
ahci3@pci0:0:31:2:	class=0x010601 card=0xb0051458 chip=0x3a228086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6 port SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
    bar   [10] = type I/O Port, range 32, base 0xf900, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0xf800, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0xf700, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xf600, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0xf500, size 32, enabled
    bar   [24] = type Memory, range 32, base 0xfbffc000, size 2048, enabled
    cap 05[80] = MSI supports 16 messages enabled with 1 message
    cap 01[70] = powerspec 3  supports D0 D3  current D0
    cap 12[a8] = SATA Index-Data Pair
    cap 13[b0] = PCI Advanced Features: FLR TP
none8@pci0:0:31:3:	class=0x0c0500 card=0x50011458 chip=0x3a308086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'SMB controller  (50011458)'
    class      = serial bus
    subclass   = SMBus
    bar   [10] = type Memory, range 64, base 0xfbffb000, size 256, enabled
    bar   [20] = type I/O Port, range 32, base 0x500, size 32, enabled
ahci0@pci0:1:0:0:	class=0x010601 card=0xb0001458 chip=0x91281b4b rev=0x11 hdr=0x00
    class      = mass storage
    subclass   = SATA
    bar   [10] = type I/O Port, range 32, base 0xcf00, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0xce00, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0xcd00, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xcc00, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0xcb00, size 16, enabled
    bar   [24] = type Memory, range 32, base 0xfbbff000, size 2048, enabled
    cap 01[40] = powerspec 3  supports D0 D3  current D0
    cap 05[50] = MSI supports 1 message enabled with 1 message
    cap 10[70] = PCI-Express 2 legacy endpoint max data 256(512) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
none9@pci0:2:0:0:	class=0x0c0330 card=0x50071458 chip=0x01941033 rev=0x03 hdr=0x00
    vendor     = 'NEC Electronics Hong Kong'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 64, base 0xfb9fe000, size 8192, enabled
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 05[70] = MSI supports 8 messages, 64 bit 
    cap 11[90] = MSI-X supports 8 messages in map 0x10
    cap 10[a0] = PCI-Express 2 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0003[140] = Serial 1 ffffffffffffffff
ecap 0018[150] = unknown 1
vgapci0@pci0:3:0:0:	class=0x030000 card=0x22911787 chip=0x68f91002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    class      = display
    subclass   = VGA
    bar   [10] = type Prefetchable Memory, range 64, base 0xe0000000, size 268435456, enabled
    bar   [18] = type Memory, range 64, base 0xfb8c0000, size 131072, enabled
    bar   [20] = type I/O Port, range 32, base 0xde00, size 256, enabled
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 10[58] = PCI-Express 2 legacy endpoint max data 256(256) link x16(x16)
    cap 05[a0] = MSI supports 1 message, 64 bit 
ecap 000b[100] = unknown 1
ecap 0001[150] = AER 1 0 fatal 1 non-fatal 1 corrected
none10@pci0:3:0:1:	class=0x040300 card=0xaa681787 chip=0xaa681002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xfb8fc000, size 16384, enabled
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 10[58] = PCI-Express 2 legacy endpoint max data 256(256) link x16(x16)
    cap 05[a0] = MSI supports 1 message, 64 bit 
ecap 000b[100] = unknown 1
ecap 0001[150] = AER 1 0 fatal 1 non-fatal 1 corrected
ahci1@pci0:5:0:0:	class=0x010601 card=0xb0001458 chip=0x2363197b rev=0x02 hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'JMicron JMB362/JMB363 AHCI Controller (JMB36X)'
    class      = mass storage
    subclass   = SATA
    bar   [24] = type Memory, range 32, base 0xfbefe000, size 8192, enabled
    cap 01[68] = powerspec 2  supports D0 D3  current D0
    cap 10[50] = PCI-Express 1 legacy endpoint IRQ 2 max data 128(128) link x1(x1)
atapci0@pci0:5:0:1:	class=0x010185 card=0xb0001458 chip=0x2363197b rev=0x02 hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'JMicron JMB362/JMB363 AHCI Controller (JMB36X)'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0xbf00, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0xbe00, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0xbd00, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xbc00, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0xbb00, size 16, enabled
    cap 01[68] = powerspec 2  supports D0 D3  current D0
atapci1@pci0:6:0:0:	class=0x010601 card=0xb0001458 chip=0x2363197b rev=0x03 hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'JMicron JMB362/JMB363 AHCI Controller (JMB36X)'
    class      = mass storage
    subclass   = SATA
    bar   [10] = type I/O Port, range 32, base 0xaf00, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0xae00, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0xad00, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xac00, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0xab00, size 16, enabled
    bar   [24] = type Memory, range 32, base 0xfbdfe000, size 8192, enabled
    cap 01[68] = powerspec 2  supports D0 D3  current D0
    cap 10[50] = PCI-Express 1 legacy endpoint IRQ 2 max data 128(128) link x1(x1)
re0@pci0:7:0:0:	class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x06 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)'
    class      = network
    subclass   = ethernet
    bar   [10] = type I/O Port, range 32, base 0xee00, size 256, enabled
    bar   [18] = type Prefetchable Memory, range 64, base 0xfbcff000, size 4096, enabled
    bar   [20] = type Prefetchable Memory, range 64, base 0xfbcf8000, size 16384, enabled
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit 
    cap 10[70] = PCI-Express 2 endpoint IRQ 2 max data 128(256) link x1(x1)
    cap 11[b0] = MSI-X supports 4 messages in map 0x20 enabled
    cap 03[d0] = VPD
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0002[140] = VC 1 max VC0
ecap 0003[160] = Serial 1 1234567812345678
fwohci0@pci0:8:6:0:	class=0x0c0010 card=0x10001458 chip=0x8024104c rev=0x00 hdr=0x00
    vendor     = 'Texas Instruments (TI)'
    device     = 'TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller'
    class      = serial bus
    subclass   = FireWire
    bar   [10] = type Memory, range 32, base 0xfbaff000, size 2048, enabled
    bar   [14] = type Memory, range 32, base 0xfbaf8000, size 16384, enabled
    cap 01[44] = powerspec 2  supports D0 D1 D2 D3  current D0
 

mav@

Aspiring Daemon
Developer

Reaction score: 218
Messages: 702

That ID I indeed see the first time. Please try this patch and report how is it going.
Code:
--- sys/dev/ahci/ahci.c      (revision 225710)                                               
+++ sys/dev/ahci/ahci.c      (working copy)                                                  
@@ -197,6 +197,7 @@                                                             
        {0x91231b4b, 0x11, "Marvell 88SE912x",  AHCI_Q_NOBSYRES|AHCI_Q_ALTSIG}, 
        {0x91231b4b, 0x00, "Marvell 88SE912x",  AHCI_Q_EDGEIS|AHCI_Q_SATA2|AHCI_Q_NOBSYRES},
        {0x91251b4b, 0x00, "Marvell 88SE9125",  AHCI_Q_NOBSYRES},               
+       {0x91281b4b, 0x00, "Marvell 88SE9128",  AHCI_Q_NOBSYRES|AHCI_Q_ALTSIG}, 
        {0x91721b4b, 0x00, "Marvell 88SE9172",  AHCI_Q_NOBSYRES},               
        {0x91821b4b, 0x00, "Marvell 88SE9182",  AHCI_Q_NOBSYRES},               
        {0x06201103, 0x00, "HighPoint RocketRAID 620",  AHCI_Q_NOBSYRES},
 
OP
OP
larrifax

larrifax

New Member


Messages: 5

Thank you! The patch seems to be working, and I can now properly detect my SATA 3 SSD that is connected to the Marvell chip.
 

mav@

Aspiring Daemon
Developer

Reaction score: 218
Messages: 702

Patch committed and merged down to 8/9-STABLE.
 
Top