Hi there. I hate 2 HDD on my comp.
I formated one of them few days ago. I followed the instructions from Handbook. Everithing was OK and today I add the new HDD in fstab. Here's my fstab
after a while on my terminal 1 a set of warnings appear like this:
It is something serious?
The ad8 HDD is still empty. Should I format it again?
thanks
I formated one of them few days ago. I followed the instructions from Handbook. Everithing was OK and today I add the new HDD in fstab. Here's my fstab
Code:
# Device Mountpoint FStype Options Dump Pass#
/dev/ad6s1b none swap sw 0 0
/dev/ad6s1a / ufs rw 1 1
/dev/ad6s1e /tmp ufs rw 2 2
/dev/ad6s1f /usr ufs rw 2 2
/dev/ad6s1d /var ufs rw 2 2
/dev/ad8s1d /data ufs rw 2 2
/dev/acd0 /cdrom cd9660 ro,noauto 0 0
after a while on my terminal 1 a set of warnings appear like this:
Code:
Jan 29 14:56:42 kernel: ad8: WARNING - SET_MULTI taskqueue timeout - completing request directly
Jan 29 14:56:42 kernel: ad8: FAILURE - WRITE_DMA timed out LBA=287
Jan 29 14:56:42 kernel:
Jan 29 14:56:42 kernel: g_vfs_done():ad8s1d[WRITE(offset=114688, length=16384)]error = 5
Jan 29 14:57:21 kernel: ad8: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Jan 29 14:57:25 kernel: ad8: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Jan 29 14:57:29 kernel: ad8: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly
Jan 29 14:57:33 kernel: ad8: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly
Jan 29 14:57:37 kernel: ad8: WARNING - SET_MULTI taskqueue timeout - completing request directly
Jan 29 14:57:37 kernel: ad8: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=287
Jan 29 14:57:47 kernel: ad8: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Jan 29 14:57:51 kernel: ad8: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Jan 29 14:57:55 kernel: ad8: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly
Jan 29 14:57:59 kernel: ad8: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly
Jan 29 14:58:04 kernel: ad8: WARNING - SET_MULTI taskqueue timeout - completing request directly
Jan 29 14:58:04 kernel: ad8: TIMEOUT - WRITE_DMA retrying (0 retries left) LBA=287
Jan 29 14:58:13 kernel: ad8: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Jan 29 14:58:17 kernel: ad8: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Jan 29 14:58:21 kernel: ad8: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly
Jan 29 14:58:25 kernel: ad8: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly
Jan 29 14:58:29 kernel: ad8: WARNING - SET_MULTI taskqueue timeout - completing request directly
Jan 29 14:58:29 kernel: ad8: FAILURE - WRITE_DMA timed out LBA=287
Jan 29 14:58:29 kernel: g_vfs_done():ad8s1d[WRITE(offset=114688, length=16384)]error = 5
It is something serious?
The ad8 HDD is still empty. Should I format it again?
thanks