Problem with FreeBSD 11 - CURRENT on Rasp Pi B

E

Eponymous

Hi,

I've got an old Raspberry Pi B and I've just tried flashing both:

http://ftp.freebsd.org/pub/FreeBSD/...RRENT-arm-armv6-RPI-B-20160408-r297692.img.xz

and then:

http://ftp.freebsd.org/pub/FreeBSD/...RRENT-arm-armv6-RPI-B-20160308-r296485.img.xz

both of which fail to boot.

I had to video the boot process as the screen goes off too quickly but I get in an endless boot cycle which terminates at this point:

Code: 
Found U-Boot device: disk
    Checking unit=0 slice=<auto> partition=<auto>...

Have I missed something here?
 
I tried both a 16GB Sandisk Ultra (SDHC I/Class 10) and an 8GB Sandisk Ultra (SDHC I/Class 10).

I also tested the cards on another Raspberry Pi and had the same issues.

Both of them fail to boot. I've tested these cards on the same device with OpenELEC and had no issues.
 
Eponymous said:
I've got an old Raspberry Pi B and I've just tried flashing both:

http://ftp.freebsd.org/pub/FreeBSD/...RRENT-arm-armv6-RPI-B-20160408-r297692.img.xz

and then:

http://ftp.freebsd.org/pub/FreeBSD/...RRENT-arm-armv6-RPI-B-20160308-r296485.img.xz

both of which fail to boot.
Click to expand...

I've also tested the latest RPI-2 image on a Raspberry Pi 2 with a third SD card - this gets further but still fails to boot.

Looks like we may have a regression.

I'll try even earlier versions (perhaps binary chopping) I can help work out when this was introduced.
 
You must log in or register to reply here.
Back
Top