not much of a boot delay, but too many entries in dmesg

drm loads nine different firmware images, there is a struggle setting up the amplifier ? and multiple entries starting with 'pcm' The output of dmesg looks ugly, what might have gone wrong with the settings? My speakers are not connected at the moment, I modified config files while trying to connect an old usb speaker, but uncommented all the entries in boot, rc, sysctl conf files, but even after that this is what dmesg outputs (complete output of 640+ lines attached as a file):

Code:
pid 12290 (zpool) is attempting to use unsafe AIO requests - not logging anymore
pid 12290 (zpool), jid 0, uid 0: exited on signal 6
hdaa1: Setting amplifier nid=20 index=0 out mute=0/0 vol=0/0
hdaa1: Setting amplifier nid=12 index=0 in mute=0/0 vol=0/0
hdaa1: Setting amplifier nid=2 index=0 out mute=0/0 vol=64/64
hdaa1: Setting amplifier nid=12 index=1 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=2 index=0 out mute=0/0 vol=64/64
hdaa1: Setting amplifier nid=12 index=0 in mute=0/0 vol=0/0
hdaa1: Setting amplifier nid=11 index=5 in mute=0/0 vol=26/26
hdaa1: Setting amplifier nid=34 index=5 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=35 index=5 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=26 index=0 in mute=0/0 vol=2/2
hdaa1: Setting amplifier nid=11 index=2 in mute=0/0 vol=23/23
hdaa1: Setting amplifier nid=35 index=2 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=24 index=0 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=11 index=0 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=35 index=0 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=12 index=1 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=13 index=1 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=35 index=10 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=11 index=0 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=11 index=2 in mute=0/0 vol=23/23
hdaa1: Setting amplifier nid=11 index=5 in mute=0/0 vol=26/26
hdaa1: Setting amplifier nid=8 index=0 in mute=0/0 vol=16/16
hdaa1: Setting amplifier nid=35 index=0 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=35 index=2 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=35 index=5 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=35 index=10 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=12 index=1 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=27 index=0 out mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=13 index=0 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=3 index=0 out mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=13 index=1 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=3 index=0 out mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=13 index=0 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=9 index=0 in mute=0/0 vol=16/16
hdaa1: Setting amplifier nid=34 index=1 in mute=0/0 vol=0/0
hdaa1: Setting amplifier nid=25 index=0 in mute=0/0 vol=2/2
hdaa1: Setting amplifier nid=34 index=5 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=13 index=1 in mute=1/1 vol=0/0
hdaa1: Setting amplifier nid=25 index=0 in mute=0/0 vol=2/2
hdaa1: Setting amplifier nid=34 index=1 in mute=0/0 vol=0/0
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1043:0x876B 0xC9).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <gfx_v9_0>
[drm] add ip block number 5 <sdma_v4_0>
[drm] add ip block number 6 <powerplay>
[drm] add ip block number 7 <dm>
[drm] add ip block number 8 <vcn_v1_0>
drmn0: successfully loaded firmware image 'amdgpu/picasso_gpu_info.bin'
[drm] BIOS signature incorrect 0 0
ATOM BIOS: 113-PICASSO-115
drmn0: successfully loaded firmware image 'amdgpu/picasso_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] VCN jpeg decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
drmn0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
drmn0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
Successfully added WC MTRR for [0xe0000000-0xefffffff]: 0;
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR4
[TTM] Zone  kernel: Available graphics memory: 3090330 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
drmn0: successfully loaded firmware image 'amdgpu/picasso_asd.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_pfp.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_me.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_ce.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_rlc_am4.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_mec.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_mec2.bin'
[drm] use_doorbell being set to: [true]
amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
drmn0: successfully loaded firmware image 'amdgpu/raven_dmcu.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_vcn.bin'
[drm] Found VCN firmware Version ENC: 1.12 DEC: 2 VEP: 0 Revision: 1
[drm] PSP loading VCN firmware
[drm] reserve 0x400000 from 0xf47f800000 for PSP TMR
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB:  400000 in kHz, 3099 in mV
[drm] DM_PPLIB:  933000 in kHz, 3574 in mV
[drm] DM_PPLIB:  1067000 in kHz, 4250 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB:  300000 in kHz, 3099 in mV
[drm] DM_PPLIB:  600000 in kHz, 3574 in mV
[drm] DM_PPLIB:  626000 in kHz, 4250 in mV
[drm] DM_PPLIB:  654000 in kHz, 4399 in mV
[drm] Display Core initialized with v3.2.48!
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] VCN decode and encode initialized successfully(under SPG Mode).
[drm] fb mappable at 0xE0BC5000
[drm] vram apper at 0xE0000000
[drm] size 5787648
[drm] fb depth is 24
[drm]    pitch is 6400
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=900 width=1600 depth=32
cmsize=16 size=5787648
pbase=0xe0bc5000 vbase=0xfffff800e0bc5000
name=drmn0 flags=0x0 stride=6400 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
drmn0: ring gfx uses VM inv eng 0 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
drmn0: ring sdma0 uses VM inv eng 0 on hub 1
drmn0: ring vcn_dec uses VM inv eng 1 on hub 1
drmn0: ring vcn_enc0 uses VM inv eng 4 on hub 1
drmn0: ring vcn_enc1 uses VM inv eng 5 on hub 1
drmn0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi1: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
ums0 on uhub0
ums0: <PIXART USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
pcm0: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
sndbuf_remalloc(): b=0xfffff80004544d80 0 -> 4096 [512]
pcm0: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[512/64/8] limit=85
pcm0: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
pcm0: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[512/64/8] limit=85
pcm0: chn_trigger() pcm0:virtual:dsp0.vp0: calling go=0xffffffff , prev=0x00000000
pcm0: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
pcm0: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[512/64/8] limit=85
pcm0: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
pcm0: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[512/64/8] limit=85
pcm0: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
pcm0: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[512/64/8] limit=85
pcm0: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
sndbuf_remalloc(): b=0xfffff80004544d80 4096 -> 16384 [16384]
pcm0: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[16384/4096/4] limit=85
pcm0: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
pcm0: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[16384/4096/4] limit=170
pcm0: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
pcm0: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[16384/4096/4] limit=341
pcm0: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
pcm0: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[16384/4096/4] limit=1881
pcm0: chn_start(): VCHAN PARENT starting! (PCMDIR_PLAY/running) (ready=2048 force=1 i=1 j=0 intrtimeout=10 latency=10ms)
hdac0: 1536Kbps of 46080Kbps bandwidth used
pcm0: PCMDIR_PLAY: Stream setup fmt=00200010 (2.0) speed=48000
pcm0: PCMDIR_PLAY: Stream setup nid=2: fmt=0x0011, dfmt=0x0001, chan=0x0010, chan_count=0x01, stripe=0
pcm0: chn_trigger() pcm0:play:dsp0.p0: calling go=0x00000001 , prev=0x00000000
pcm0: chn_trigger() pcm0:virtual:dsp0.vp0: calling go=0x00000001 , prev=0x00000000
pcm1: chn_resizebuf(): PCMDIR_REC (hardware) timeout=2 b[512/256/2] bs[512/256/2] limit=0
sndbuf_remalloc(): b=0xfffff80004544000 0 -> 4096 [2048]
pcm1: chn_resizebuf(): PCMDIR_REC (virtual) timeout=2 b[0/0/0] bs[2048/16/128] limit=20
pcm1: chn_resizebuf(): PCMDIR_REC (hardware) timeout=2 b[512/256/2] bs[512/256/2] limit=0
pcm1: chn_resizebuf(): PCMDIR_REC (virtual) timeout=2 b[0/0/0] bs[2048/16/128] limit=20
pcm1: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
sndbuf_remalloc(): b=0xfffff80004544300 0 -> 4096 [512]
pcm1: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[512/64/8] limit=85
pcm1: chn_resizebuf(): PCMDIR_PLAY (hardware) timeout=10 b[2048/1024/2] bs[2048/1024/2] limit=0
pcm1: chn_resizebuf(): PCMDIR_PLAY (virtual) timeout=10 b[0/0/0] bs[512/64/8] limit=85
etc
 

Attachments

  • dmesgaug0220221850.txt
    44.3 KB · Views: 81
Did you perhaps enable verbose boot?

Code:
#boot_verbose=""        # -v: Causes extra debugging information to be printed
 
Did you perhaps enable verbose boot?

Code:
#boot_verbose=""        # -v: Causes extra debugging information to be printed

Thank you. I probably have enabled it by some other command(s). I have this in my /boot/loader.conf Some of these settings probably cause the voluminous output.
Code:
sysctlbyname_improved_load="YES"
security.bsd.allow_destructive_dtrace=0
autoboot_delay=1       # OPTION '-1' MEANS NO WAIT AND 'NO' MEANS INFINITE WAIT
fuse_load="YES"
cfumass_load="YES"
mac_ntpd_load="YES"

and in /etc/rc.conf
Code:
syslogd_flags="-ss -vv"
syslogd_flags="-ss"
dumpdev="AUTO"

and in /etc/sysctl.conf
Code:
# Max. number of virtual channels
dev.pcm.0.play.vchans=4
dev.pcm.0.rec.vchans=4
hw.snd.maxautovchans=32
# Set default sound device
hw.snd.default_unit=3
# Set level of sndstat reporting
hw.snd.verbose=4

The size of the dmesg output is not an issue per se, but the unnecessary processes that might cause these outputs.
 
Code:
hw.snd.verbose=4
That's probably the reason for the plethora of messages regarding the audio devices.
 
Code:
hw.snd.verbose=4
That's probably the reason for the plethora of messages regarding the audio devices.

Thank you SirDice Uncommented that and everything related to snd (because I am not trying to set up an usb speaker, and audio worked fine without the snd settings.) Also uncommented syslogd_flags="-ss -vv" Dmesg now is down to 274 from 650+ lines (which looked sort of ugly)

Still wondering what is happening with the drm lookup:

Code:
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1043:0x876B 0xC9).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 524288
[drm] add ip block number 0 <soc15_common>
[drm] add ip block number 1 <gmc_v9_0>
[drm] add ip block number 2 <vega10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <gfx_v9_0>
[drm] add ip block number 5 <sdma_v4_0>
[drm] add ip block number 6 <powerplay>
[drm] add ip block number 7 <dm>
[drm] add ip block number 8 <vcn_v1_0>
drmn0: successfully loaded firmware image 'amdgpu/picasso_gpu_info.bin'
[drm] BIOS signature incorrect 0 0
ATOM BIOS: 113-PICASSO-115
drmn0: successfully loaded firmware image 'amdgpu/picasso_sdma.bin'
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] VCN jpeg decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
drmn0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
drmn0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
Successfully added WC MTRR for [0xe0000000-0xefffffff]: 0;
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR4
[TTM] Zone  kernel: Available graphics memory: 3090330 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
drmn0: successfully loaded firmware image 'amdgpu/picasso_asd.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_pfp.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_me.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_ce.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_rlc_am4.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_mec.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_mec2.bin'
[drm] use_doorbell being set to: [true]
amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
drmn0: successfully loaded firmware image 'amdgpu/raven_dmcu.bin'
drmn0: successfully loaded firmware image 'amdgpu/picasso_vcn.bin'
[drm] Found VCN firmware Version ENC: 1.12 DEC: 2 VEP: 0 Revision: 1
[drm] PSP loading VCN firmware
[drm] reserve 0x400000 from 0xf47f800000 for PSP TMR
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB:  400000 in kHz, 3099 in mV
[drm] DM_PPLIB:  933000 in kHz, 3574 in mV
[drm] DM_PPLIB:  1067000 in kHz, 4250 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB:  300000 in kHz, 3099 in mV
[drm] DM_PPLIB:  600000 in kHz, 3574 in mV
[drm] DM_PPLIB:  626000 in kHz, 4250 in mV
[drm] DM_PPLIB:  654000 in kHz, 4399 in mV
[drm] Display Core initialized with v3.2.48!
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] VCN decode and encode initialized successfully(under SPG Mode).
[drm] fb mappable at 0xE0BC5000
[drm] vram apper at 0xE0000000
[drm] size 5787648
[drm] fb depth is 24
[drm]    pitch is 6400
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=900 width=1600 depth=32
cmsize=16 size=5787648
pbase=0xe0bc5000 vbase=0xfffff800e0bc5000
name=drmn0 flags=0x0 stride=6400 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
drmn0: ring gfx uses VM inv eng 0 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
drmn0: ring sdma0 uses VM inv eng 0 on hub 1
drmn0: ring vcn_dec uses VM inv eng 1 on hub 1
drmn0: ring vcn_enc0 uses VM inv eng 4 on hub 1
drmn0: ring vcn_enc1 uses VM inv eng 5 on hub 1
drmn0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0

Thank you.
 
Back
Top