Hi!
I have a problem with IPv6 and a QLogic NetXtreme II BCM57810 10Gb.
For some reason I can't get an non-static address.
The same configuration with CAT 6, mainboard ports at the same switch is working fine.
/etc/rc.conf
I have a problem with IPv6 and a QLogic NetXtreme II BCM57810 10Gb.
For some reason I can't get an non-static address.
The same configuration with CAT 6, mainboard ports at the same switch is working fine.
/etc/rc.conf
Code:
ifconfig_bxe0="DHCP"
ifconfig_bxe0_ipv6="inet6 autoconf accept_rtadv"
# ifconfig bxe0
Code:
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
ether 00:10:18:xx:xx:xx
hwaddr 00:10:18:xx:xx:xx
inet6 fe80::xx:xx:xxx:3880%bxe0 prefixlen 64 scopeid 0x1
inet6 2001:xxx:xxx:xxx:xxx:xxx:xxxx:3880 prefixlen 64 autoconf
inet xxx.xx.xx.211 netmask 0xffffff00 broadcast xxx.xx.xx.255
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (10Gbase-SR <full-duplex>)
status: active