A strange problem occured that I would like to solve. I use an external USB drive on my server that now refuses to appear in /dev at boot. I have a message about the drive, but no device node:
If after the boot I unplug and plug it again, it works well:
The problem is the same with a GENERIC kernel. I had no problem on my previous installation of FreeBSD 8.2. I upgraded to 8.3 by reinstallation without sysinstall (following this method)
Did I miss something?
Code:
ugen4.2: <Sony> at usbus4
umass0: <Sony Hard Drive, class 0/0, rev 2.10/25.30, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0:-1: Attached to scbus0
Code:
ugen4.2: <Sony> at usbus4
umass0: <Sony Hard Drive, class 0/0, rev 2.10/25.30, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0:-1: Attached to scbus0
da1 at umass-sim0 bus 0 scbus0 target 0 lun 0
da1: <Sony Hard Drive > Fixed Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 476940MB (976773164 512 byte sectors: 255H 63S/T 60801C)Did I miss something?