No audio in intel 82801I

eleanor

eleanor

Hi, I've got similar problem. My sound doesn't work. Here are my settings.

My sound card is:
Code: 
Intel 82801I (ICH9)

# lspci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)

Other outputs:
Code: 
root@eleanor-laptop eleanor # cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm1: <HDA Analog Devices AD1984A PCM #0 Analog> (play/rec)
pcm2: <HDA Analog Devices AD1984A PCM #1 Analog> (rec) default

Code: 
root@eleanor-laptop eleanor # dmesg | grep pcm
pcm1: <HDA Analog Devices AD1984A PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Analog Devices AD1984A PCM #1 Analog> at cad 0 nid 1 on hdac0

Code: 
root@eleanor-laptop eleanor # cat /boot/device.hints
# $FreeBSD: src/sys/amd64/conf/GENERIC.hints,v 1.21.2.1.4.1 2010/06/14 02:09:06 kensmith Exp $
hint.fdc.0.at="isa"
hint.fdc.0.port="0x3F0"
hint.fdc.0.irq="6"
hint.fdc.0.drq="2"
hint.fd.0.at="fdc0"
hint.fd.0.drive="0"
hint.fd.1.at="fdc0"
hint.fd.1.drive="1"
hint.atkbdc.0.at="isa"
hint.atkbdc.0.port="0x060"
hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
hint.sc.0.at="isa"
hint.sc.0.flags="0x100"
hint.uart.0.at="isa"
hint.uart.0.port="0x3F8"
hint.uart.0.flags="0x10"
hint.uart.0.irq="4"
hint.uart.1.at="isa"
hint.uart.1.port="0x2F8"
hint.uart.1.irq="3"
hint.ppc.0.at="isa"
hint.ppc.0.irq="7"
hint.atrtc.0.at="isa"
hint.atrtc.0.port="0x70"
hint.pcm.0.at="isa"
hint.pcm.0.irq="5"
hint.pcm.0.drq="1"
hint.pcm.0.flags="0x0"
root@eleanor-laptop eleanor #

Code: 
Mixer vol      is currently set to 100:100
Mixer pcm      is currently set to  75:75
Mixer speaker  is currently set to  75:75
Mixer line     is currently set to  75:75
Mixer rec      is currently set to  75:75
Mixer igain    is currently set to   0:0
Mixer ogain    is currently set to  50:50
Mixer monitor  is currently set to  75:75
Recording source: monitor

I'm testing with: (there's no sound)
Code: 
cat /home/eleanor/Desktop/Pictures/p6290589.jpg >> /dev/dsp1.0

I also tried:
Code: 
sysctl hw.snd.default_unit=1
sysctl hw.snd.default_unit=2
nothing is changed.

And I have sound and snd_hda compiled into kernel. What seem to be the problem?
 
Code: 
root@eleanor-laptop eleanor # cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm1: <HDA Analog Devices AD1984A PCM #0 Analog> (play/rec)
pcm2: <HDA Analog Devices AD1984A PCM #1 Analog> (rec) default
This means that pcm2 chosen as default device. But theie is just no playback part on it. Look closer on pcm1 and it's mixer.
 
So what are you suggesting. That I need to play my sound through pcm1? But if I set "sysctl hw.snd.default_unit=1" it doesn't work either. How can I solve it?
 
What are you talking about. There are no wires, I need my built-in laptop's sound system. I'm not pluging-in with headphones.

So, still waiting for a solution?
 
Pcm1 is the default now, but still no sound:

Code: 
root@eleanor-laptop scripts # cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm1: <HDA Analog Devices AD1984A PCM #0 Analog> (play/rec) default
pcm2: <HDA Analog Devices AD1984A PCM #1 Analog> (rec)
 
You must log in or register to reply here.
Back
Top